2024 Lincoln Corsair Seat Belt Owner’s Manual
The 2024 Lincoln Corsair Seat Belt redefines driving comfort and safety by skillfully fusing cutting-edge design with steadfast protection. With adjustable features and ergonomic design components, these seat belts, which have been painstakingly crafted, not only guarantee the safety of the occupants but also improve their overall comfort.
2024 LINCOLN Corsair Specs, Price, Features, Mileage and Review
LINCOLN SEATBELT PRECAUTIONS
WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips.
WARNING: Children must always be properly restrained.
WARNING: Do not allow a passenger to hold a child on their lap when your vehicle is moving. Failure to follow this instruction could result in personal injury or death in the event of a sudden stop or crash.
WARNING: All occupants of your vehicle, including the driver, should always properly wear their seatbelts, even when an airbag supplemental restraint system is provided. Failure to properly wear your seatbelt could seriously increase the risk of injury or death.
WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seatbelts. Make sure everyone in your vehicle is in a seat and properly using a seatbelt. Failure to follow this warning could result in serious personal injury or death.
WARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seatbelt.
WARNING: Each seating position in your vehicle has a specific seatbelt assembly made up of one buckle and one tongue designed to be used as a pair. Use the shoulder belt on the outside shoulder only. Never wear the shoulder belt under the arm. Never use a single seatbelt for more than one person.
WARNING: Even with advanced restraints systems, properly restrain children 12 and under in a rear seating position. Failure to follow this could seriously increase the risk of injury or death.
WARNING: Seatbelts and seats may be hot in a vehicle that is in the sunshine. The hot seatbelts or seats may burn a small child. Check seat covers and buckles before you place a child anywhere near them.
WARNING: If your vehicle is involved in a crash, have the seatbelts and associated components inspected as soon as possible. Failure to follow this instruction could result in personal injury or death. All seating positions in this vehicle have lap and shoulder seatbelts. All occupants of the vehicle should properly wear their seatbelts, even when an airbag supplemental restraint system is provided.
The seatbelt system consists of:
- Lap and shoulder seatbelts.
- A shoulder seatbelt with automatic locking mode, except the driver seatbelt.
- Height adjusters at the front outermost seating positions.
- Seatbelt pretensioners at the front outermost and second-row outermost seating positions.
- Belt tension sensor at the front outermost passenger seating position.
A seatbelt warning light and tone.
Crash sensors and monitoring system with readiness indicator.
The seatbelt pretensioners are designed to tighten the seatbelts when activated. In frontal and near-frontal crashes, the seatbelt pretensioners may be activated alone or, if the crash is of sufficient severity, together with the front airbags. The pretensioners may also activate when a Safety Canopy airbag deploys.
FASTENING THE SEATBELTS
All seatbelts in your vehicle are a three-point combination lap and shoulder seatbelt.
- Seatbelt tongue.
- Seatbelt buckle.
- Pull the seatbelt out steadily.
Note: It may lock if you pull it sharply or if the vehicle is on a slope. - Insert the tongue into the buckle.
- Pull the seatbelt tight to remove any slack.
Unfastening the Seatbelts
- Press the red button on the buckle to release the seatbelt.
- Hold the seatbelt tongue and let it retract completely and smoothly to its stowed position.
When in use, place the rear seatbelts in the belt guides on the outermost seat backrests.
Using a Sliding Clip (If Equipped)
Slide the clip away from the tongue so there is no loose webbing when an occupant or child seat is buckled. Use the sliding clip to raise the tongue to prevent it from rattling and to access it more easily.
SENSITIVE LOCKING MODE USER MANUAL
WHAT IS SENSITIVE LOCKING MODE
Sensitive locking mode is a seatbelt retractor feature that allows shoulder belt length adjustment according to your movements and locking in response to vehicle movement.
HOW DOES SENSITIVE LOCKING MODE WORK
If the driver suddenly brakes, turns a corner sharply, or the vehicle receives an impact of about 5 mph (8 km/h) or more, the seatbelts lock to help reduce forward movement of the driver and passengers. In addition, the seatbelt retractor locks if you pull the seatbelt webbing out too quickly. If the retractor locks, slowly lower the height adjuster to allow the seatbelt to retract. If the retractor does not unlock, pull the seatbelt out slowly then feed a small length of webbing back toward the stowed position.
AUTOMATIC LOCKING MODE WHAT IS AUTOMATIC LOCKING MODE
This is a safety feature built into the seatbelt retractors that keeps the seatbelts pre-locked.
ENGAGING AUTOMATIC LOCKING MODE
- Fasten the combination lap and shoulder belt.
- Grasp the shoulder portion and pull downward until you pull the entire belt out.
- Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the seatbelt is now in the automatic locking mode.
DISENGAGING AUTOMATIC LOCKING MODE
Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive locking mode.
Extracting Seatbelts in the Rear Outermost Seat Positions
Seatbelts in the rear outermost positions can lock if you firmly return the seat backrest to its upright position. You can unlock the seatbelts using the following procedures.
For vehicles where the rear seats recline:
- Recline the seat to its full rear recline position.
- The seatbelt should then unlock.
- Return the seat backrest to its desired upright position.
For vehicles with rear seats that do not recline or are locked with the seat in its full rear recline position:
- Grasp the seatbelt webbing at the top of the seat backrest.
- Pull the seatbelt webbing forward, firmly.
- After pulling the seatbelt forward, allow the seatbelt to feed back into the seatbelt retractor as much as possible. If necessary, press the seat backrest down to allow the seatbelt webbing to retract further.
- The seatbelt should then unlock.
- If the seatbelt does not unlock, repeat steps 1-3.
ADJUSTING THE SEATBELTS DURING PREGNANCY
WARNING: Always ride and drive with your seatback upright and properly fasten your seatbelt. Fit the lap portion of the seatbelt snugly and low across the hips. Position the shoulder portion of the seatbelt across your chest. Pregnant women must follow this practice. See the following figure.
Pregnant women should always wear their seatbelt. Position the lap belt portion of a combination lap and shoulder belt low across the hips below the belly and worn as tight as comfort allows. Position the shoulder belt to cross the middle of the shoulder and the center of the chest.
ADJUSTING THE SEATBELT HEIGHT
WARNING: Position the seatbelt height adjuster so that the seatbelt rests across the middle of your shoulder. Failure to adjust the seatbelt correctly could reduce its effectiveness and increase the risk of injury in a crash.
- Press the button and slide the height adjuster up or down.
- Release the button and pull down on the height adjuster to make sure it is locked in place.
LINCOLN SEATBELT REMINDER
HOW DOES THE SEATBELT REMINDER WORK
WARNING: The system will only provide protection when you use the seatbelt correctly.
This system monitors all seating positions and provides audio and graphic feedback.
SEATBELT REMINDER INDICATORS
This lamp illuminates if you do not fasten your seatbelt when you switch the ignition on. The lamp switches off when you fasten your seatbelt or about one minute has elapsed. When the initial warning expires for the driver, more warnings are provided for the driver and front passenger. This lamp illuminates if you or your front passenger do not fasten the seatbelt buckle and the vehicle speed exceeds 6 mph (10 km/h).
Note: To avoid inadvertent warnings, do not place large objects on the front passenger seat.
This lamp illuminates when you switch the ignition on, identifying the number of seating positions with fastened buckles. It illuminates again when a seating position changes from unfastened to fastened.
This warning displays if an occupant unfastens the rear seatbelt buckle or it becomes unfastened.
Note: If a rear seat is unoccupied, or an occupant never fastens the seatbelt buckle to begin with, the warning will not display.
Note: Front seating positions appear in this warning display. Warnings for unfastened front seatbelt buckles appear in the initial warning lamp.
Seatbelt Status
To view the seatbelt status, use the information cluster controls on the steering wheel.
- Seatbelt fastened.
- The seatbelt not fastened.
- The seatbelt recently unfastened.
- Fault.
SEATBELT REMINDER AUDIBLE WARNINGS
A warning tone sounds if you do not fasten your seatbelt when you switch the ignition on. The tone switches off when you fasten your seatbelt or about one minute elapses. When the initial warning expires for the driver, more warnings are provided for the driver and front passenger. This warning tone sounds if you or your front passenger do not fasten the seatbelt buckle and the vehicle speed exceeds 6 mph (10 km/h). This tone also sounds if an occupant unfastens the rear seatbelt buckle or it becomes unfastened.
SWITCHING THE SEATBELT REMINDER ON AND OFF
WARNING: While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use the vehicle.
Note: The driver and front passenger warnings switch off independently. When you perform this procedure for one seating position and the other seat is occupied, buckle the other seat.
Read Steps 1 – 4 before proceeding with the programming procedure.
Make sure that:
- You set the parking brake.
- The transmission is in park (P).
- The ignition is off.
- You close all vehicle doors.
- You unfasten the driver and front passenger seatbelts.
- Switch the ignition to RUN.
- Wait a short period of time until the seatbelt warning tone switches off. After Step 2, Step 3 must be completed within 30 seconds after you start your vehicle.
- For the seating position you are switching off, fasten then unfasten the seatbelt four times at a moderate speed ending in the unfastened state. After each unfasten, the seatbelt warning light switches on and off with each fasten.
- The seatbelt warning light flashes for confirmation.
CHECKING THE SEATBELTS
Check the seatbelts and child restraints periodically to make sure they work properly and are not damaged. Make sure there are no nicks, tears or cuts. Replace if necessary. Check the following seatbelt assemblies after a crash.
- Retractors.
- Buckles.
- Front seatbelt buckle assemblies.
- Shoulder belt height adjusters.
- Shoulder belt guide on seat backrest.
- Child restraint LATCH and tether anchors.
- Attaching hardware.
Read the child restraint manufacturer’s instructions for additional inspection and maintenance information specific to the child restraint. We recommend that all seatbelt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Seatbelt assemblies not in use during a crash should also be checked and replaced if either damage or improper operation is noted. Properly care for seatbelts.
SEATBELT EXTENSIONS
WARNING: Persons who fit into the vehicle’s seatbelt should not use an extension. Unnecessary use could result in serious personal injury in the event of a crash.
WARNING: Only use extensions provided free of charge by our dealers. The dealer will provide an extension designed specifically for this vehicle, model year and seating position. The use of an extension intended for another vehicle, model year or seating position may not offer you the full protection of your vehicle’s seatbelt restraint system.
WARNING: Never use seatbelt extensions to install child restraints.
WARNING: Do not use extensions to change the way the seatbelt fits across the torso, over the lap or to make the seatbelt buckle easier to reach.
If, because of body size or driving position, it is not possible to properly fasten the seatbelt over your lap and shoulder, an extension that is compatible with the seatbelts is available free of charge from our dealers. Only use our seatbelt extensions made by the original equipment seatbelt manufacturer with our seatbelts. Ask your authorized dealer if your extension is compatible with your vehicle restraint system.
FAQs
The 2024 Lincoln Corsair Seat Belt features advanced safety technology, including pre-tensioners and force limiters, to enhance occupant protection in the event of a collision.
The 2024 Lincoln Corsair Seat Belt features a standard three-point seat belt design, securing occupants at the lap and across the shoulder for optimal safety.
Yes, the seat belts in the 2024 Lincoln Corsair are adjustable, allowing occupants to customize the fit for maximum comfort and safety.
Yes, the 2024 Lincoln Corsair Seat Belt is equipped with audible and visual reminders to prompt occupants to fasten their seat belts before driving.
Yes, the 2024 Lincoln Corsair Seat Belt offers adjustable height settings to accommodate occupants of various sizes and seating positions.
The 2024 Lincoln Corsair Seat Belt is engineered to securely restrain occupants during sudden stops or collisions, minimizing the risk of injury and providing peace of mind.
In addition to standard restraints, the 2024 Lincoln Corsair Seat Belt may offer features such as pretensioners, which automatically tighten the belt upon detecting a collision to reduce forward movement.
Yes, the 2024 Lincoln Corsair Seat Belt is designed to accommodate child safety seats, with features such as adjustable anchors and compatibility with various restraint systems.
Yes, the seat belts in the 2024 Lincoln Corsair are compatible with booster seats, providing secure restraint for young passengers as they transition from child safety seats.
The 2024 Lincoln Corsair Seat Belt features ergonomic design elements and adjustable settings to ensure a comfortable fit for occupants, reducing fatigue during extended periods of driving.
Yes, the seat belts in the 2024 Lincoln Corsair are designed for easy operation, with intuitive buckles and release mechanisms for effortless use.
Some models of the 2024 Lincoln Corsair may feature shoulder padding on the seat belts to enhance comfort and reduce pressure on occupants’ shoulders during use.
The 2024 Lincoln Corsair Seat Belt plays a crucial role in maintaining a safe driving environment by ensuring that occupants are properly restrained in the event of a collision or sudden maneuver.
Yes, the seat belts in the 2024 Lincoln Corsair may feature emergency locking retractors, which engage during sudden stops or collisions to prevent excessive belt slack and keep occupants secure.
Yes, damaged or worn seat belts in the 2024 Lincoln Corsair can be replaced by authorized service technicians to maintain optimal safety for occupants.
The quality and effectiveness of the seat belts in the 2024 Lincoln Corsair are factors considered in overall vehicle safety ratings, as they play a critical role in protecting occupants during crashes.
Useful Links
2024 LINCOLN Corsair Specs, Price, Features, Mileage and Review