2018 Maserati Quattroporte Owner’s Manual

The 2018 Maserati Quattroporte, an Italian luxury sports sedan, made a name for itself by combining great speed with a beautiful exterior and a luxurious interior. This fourth-generation Quattroporte has a range of powerful engines, including V6 and V8 choices, which give it thrilling acceleration and responsive handling. It stands out on the road thanks to its unique design, which combines smooth lines with Maserati’s signature Trident head. Inside, the Quattroporte pampers its passengers with high-quality materials, cutting-edge technology, and a wide range of customizable choices. This takes the Italian elegance and sophistication of driving to a whole new level.

Before Starting

Keys
The vehicle is equipped with a Remote Keyless Entry transmitter and a Keyless Ignition Node, to enter, start and protect the vehicle.

Keyless Ignition Device
This device allows the driver to operate the ignition switch with the push of a button, as long as the Remote Keyless Entry (RKE) transmitter is inside the vehicle. The Keyless Ignition Node (KIN) has three operating setups indicated on the outer ring. Pressing and releasing the middle button, you can switch from one setup to the next without starting the engine, the switched-on indication will turn amber.
The engine will start by pushing the center button START/STOP with the brake pedal pressed and the device set in any of the three operating setups. In case the ignition switch does not change by pushing a button, the RKE transmitter (key fob) may have a low or discharged battery. If this occurs it is necessary to replace the battery in order to operate the ignition switch (see “Requiring and Setting Additional Key fobs” in this section). It is still possible to operate the ignition device using the key fob RKE transmitter with a discharged battery by pressing the nose side (side opposite of the emergency key) of the key fob on the START/STOP button.

Key fob
The vehicle is provided with two programmed key fobs. The key fob also contains the Remote Keyless Entry (RKE) transmitter and an inserted emergency key in the rear. The emergency key allows one to open the vehicle by inserting it into the lock of the opening handle on the driver’s door, in case the battery of the vehicle or the key fob is discharged. You can keep the emergency key with you when using valet parking.
To remove the emergency key:

• Hold the mechanical latch on the back of the key fob sideways;
• Simultaneously remove the emergency key by sliding it laterally toward the end of the key fob.
  NOTE: You can insert either side of the emergency key into the lock cylinder.

Shift Ignition Device to OFF Alert
Opening the driver’s door to exit the vehicle when the ignition device is set in ACC or RUN (engine not running), a beep will remind you to cycle the ignition to OFF. In addition to the acoustic signal, a dedicated message is displayed on the instrument cluster. If the ignition device is left in the ACC or RUN position, when the vehicle is locked the system will turn off the instrument cluster and automatically set the ignition device to OFF. With the MTC+ System, the power window switches, radio, power sunroof (optional), and power outlets will remain active for up to 10 minutes after the ignition switch is cycled to the OFF position. Opening either front door will cancel this feature, it is possible to set the timing of this feature.
NOTE: Refer to “MTC+ Settings” in Section “Dashboard Instruments and Controls” for further information.

WARNING

• When leaving the vehicle, always remove the key fob and lock your vehicle.
• Never leave children alone in a vehicle, or with access to an unlocked vehicle.
• Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake switch, brake pedal, or shift lever.
• Do not leave the key fob in or near the vehicle, and do not leave the ignition switch in the ACC or RUN mode. A child could operate power windows, and other controls, or move the vehicle.
• Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
• An unlocked car is an invitation to thieves. Always remove the key fob from the vehicle, cycle the ignition switch to OFF, and lock all doors when leaving the vehicle unattended.

Sentry Key® Immobilizer System
The Sentry Key® Immobilizer System prevents unauthorized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.
The system uses a key fob with a Remote Keyless Entry (RKE) transmitter, an ignition switch, and an RF (Radio Frequency) receiver to prevent unauthorized vehicle operation. Therefore, only key fobs expressly programmed can be used to start and operate the vehicle. After placing the ignition in the RUN position, the Vehicle Security Light (see picture) will light up for a three-second bulb check. If the light remains on after the bulb check, it indicates that there is a problem with the electronics: This condition will result in the engine being shut off after two seconds. If the Vehicle Security Light turns on during normal vehicle operation (engine running for longer than 10 seconds), an electronic fault is detected. Should this occur, ask as soon as possible the Service Network for assistance.
CAUTION: The Sentry Key® Immobilizer system is not compatible with some remote starting systems that can be installed in after-market. Use of these systems may result in vehicle starting problems and loss of security protection.

All key fobs provided with the new vehicle have been updated with the vehicle electronics and are therefore able to guarantee correct functioning and protection.

Radio Frequency RKE Transmitter – Regulatory Information
The “Regulatory Information” for all the radio frequency and radar devices can be consulted by accessing the section “SERVICES” on the website www.maserati.com or by using the specific apps developed for the more common Tablet and Smartphone.

Replacement Key fobs
NOTE: Only key fobs that are updated with the vehicle electronics can be used to start and operate the vehicle.

WARNING

• Always remove the key fobs from the vehicle and lock all doors when leaving the vehicle unattended.
• Always remember to cycle the ignition switch to OFF.

Duplication of key fobs may be performed by the Service Network only. This procedure consists of programming a key fob that has never been programmed into the vehicle’s electronics.
NOTE

• When having the Sentry Key® Immobilizer System serviced, bring all key fobs provided with the vehicle with you to the Maserati Service Center.
• When selling the vehicle, it is necessary to provide the new owner with all key fobs.

Vehicle Security Alarm

The vehicle security alarm monitors the vehicle doors and boot lid for unauthorized entry and the START/STOP button for unauthorized operations. The system includes a dual-function anti-intrusion sensor and a vehicle anti-lift sensor. The anti-intrusion sensor monitors the vehicle interior for motion. The vehicle anti-lift sensor monitors the vehicle for any lifting or tilting actions (tow away, tire removal, ferry transport, etc.). A siren with battery backup which senses interruptions of power and communications is also included.
While the vehicle security alarm is enabled, interior door lock switches, boot lid, and fuel filler door release are disabled. If something triggers the alarm, the vehicle security alarm will provide the following audible and visible signals: intermittent buzzer, position lights, and/or turn signals, and the vehicle security light on the dashboard will flash. This light will fast flash for approximately 15 seconds, when the vehicle security alarm is being armed, and will then flash slowly until the vehicle is disarmed.

Rearming the System
If something triggers the security alarm, and no quick action is taken to disarm it, the vehicle security alarm will turn off the beeper after 29 seconds, and turn off all of the visual signals after 31 more seconds; the vehicle security alarm will then rearm itself.

Arming the System
Follow these steps to arm the vehicle security alarm.

• Make sure the vehicle ignition switch is OFF.
• Perform one of the following methods to lock the vehicle:
• Press the lock button on the interior power door lock switch located on the driver door trim panel with the driver and/or passenger door open.
• Press the button on the exterior Passive Entry door handle having a valid key fob RKE transmitter in the same exterior zone (see “Passive Entry System” in this section for further information).
• Press the lock button on the key fob RKE transmitter.
• If any door is open, close it.
• In any of these situations, if one or more windows are open, will remain open. To close the windows press again the lock button and hold it until their closure.

If the vehicle is equipped with Power Boot Lid/Hands-Free, when arming the alarm system in any of the described ways, the boot lid will remain open if it is left open. In this condition, it will be necessary to first close the boot lid as described under “Open and Close the Boot Lid” in this section, and repeat the arming operation, to be able to arm the alarm system. Vehicles equipped with Power Boot Lid/Hands-Free button – located at the bottom of the boot lid and indicated in the figure – that can be used to completely close and lock the boot lid, lock all the doors, and arm the alarm system if all the doors and boot lid are closed. See the chapter “Open and Close the Boot Lid” in this section for further information. Each time the vehicle security alarm is armed, the anti-intrusion and anti-lift sensors actively monitor the vehicle. When arming the security alarm, it is possible to disable these sensors by pressing the button on the key fob three times within 5 seconds from the moment the system has been armed (meanwhile the security alarm light flashes rapidly).

To disarm the System
Use any of the following steps to disarm the vehicle security alarm.

• Press the button on the key fob RKE transmitter.
• Grasp the Passive Entry unlock door handle (see “Passive Entry System” in this section for further information).
• Press the START/STOP button so as to release the OFF position.

NOTE

• When the vehicle security alarm is armed, the interior power door lock switch will not allow it to unlock the doors.
• The use of the emergency key in the driver door lock and the use of the button on the key fob cannot arm or disarm the security alarm of the vehicle.
• The vehicle security alarm remains engaged while accessing the Power Boot Lid/Hands-free. Pressing the button between the license plate lights will not disarm the vehicle security alarm. If anyone enters the vehicle through the boot lid and opens a door, the alarm will trigger.

The vehicle security alarm is designed to protect your vehicle; however, you can create conditions where the system will give you a false alarm. If one of the previously described arming sequences has occurred, the vehicle security alarm will arm regardless of whether you are in the vehicle or not. If you remain in the vehicle and open a door, the alarm will activate. If this occurs, disarm the vehicle security alarm.
If the vehicle security alarm is armed and the battery becomes disconnected, the vehicle security alarm will remain armed when the battery is reconnected; the exterior lights will flash, and the buzzer will activate. If this occurs, disarm the vehicle security alarm.

FAQ’s