Maserati Ghibli 2023 Blind Spot Assist User Manual
Introduction
For many years, the Maserati Ghibli has been regarded as a model of class, strength, and luxury. The 2023 Ghibli elevates these attributes by fusing Italian craftsmanship with cutting-edge technology. The Blind Spot Assist system, which is a distinguishing element of this venerable sports sedan and is intended to increase driver confidence and safety on the road, is one such function. By monitoring and warning drivers of cars in their blind spots, Blind Spot Assist is a cutting-edge driver assistance technology that helps drivers navigate their surroundings. In order to detect things in neighboring lanes and maintain a complete view of the road at all times, this technology makes use of sensors and cameras that are strategically placed around the car.
An indicator that normally appears in the side mirror or instrument cluster serves as a visual warning when the Blind area Assist system detects a vehicle approaching in the driver’s blind area. In some circumstances, it might also sound an auditory alert to make sure the driver is aware of the potential hazard right away. By actively assisting the driver in safer lane changes and maneuvers, this intelligent system lowers the chance of crashes brought on by blind spot mistakes. Drivers may comfortably change lanes on motorways, maneuver through congested city traffic, and handle difficult road conditions with the Maserati Ghibli 2023’s Blind Spot Assist.
Blind Spot Assist
System Operation
The Blind Spot Assist (BSA) system uses two radar-based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (cars, buses, motorbikes, etc.) that enter the blind spot zones from the rear/front/side of the vehicle in adjacent lanes. The example shown in the figure highlights the blind spots on either side of the vehicle when oncoming traffic is approaching from behind.
When the vehicle is started, the BSA warning light will momentarily illuminate in both outside rear view mirrors to let the driver know that the system is operational and on. The BSA system sensors operate when the vehicle is in any forward gear and enters standby mode when the transmission is in (P) Park.
The BSA detection zone shown in figure covers approximately one lane on both sides of the vehicle (approximately 11 ft or 3.3 m). The blind spot area extends from immediately behind the exterior rearview mirrors up to about 23 ft (7 m) behind the rear bumper.
The BSA system monitors the detection zones on both sides of the vehicle to detect the presence of vehicles and begins to warn the driver by flashing the warning light in the external side mirror when the vehicle speed reaches approximately 4 MPH (6 km/h) or higher.
WARNING!
- The Blind Spot Assist (BSA) system does NOT alert the driver about rapidly approaching vehicles that are outside the detection zones.
- The BSA might alert the driver too late especially in case of rapidly approaching vehicles.
- The driver must always pay utmost attention and drive carefully.
WARNING!
Risk of accident despite Blind Spot Assist (BSA). BSA does not detect/react to the following:
- Overtaking vehicles close on the side, placing them in the blind spot area. As a result, BSA may neither give warnings nor intervene in such situations.
- Always pay attention to the traffic situation and maintain a safe distance at the side of the vehicle.
NOTE:
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become misaligned. Take your vehicle at an Authorized Maserati Dealer to verify sensor alignment. Having a sensor that is misaligned will result in the BSA not operating to specification. The area on the rear bumper fascia where the radar sensors are located must remain free of snow, ice, and dirt/road contamination so that the BSA system can function properly. Do not cover or block the area of the rear bumper fascia where the radar sensors are located with foreign objects (bumper stickers, spoilers, bicycle racks, etc.). The BSA system notifies the driver of vehicles or objects in the detection zones by illuminating the BSA warning light located in the outside mirrors in addition to sounding an audible (chime) alert and reducing the radio volume
(if the radio is on). Refer to “BSA and RCP Setting” in this chapter for further information. The BSA system monitors the detection zone from three different entry points (side, rear, overtaking traffic) while driving to see if an alert is necessary. The BSA system will issue an alert whenever a vehicle enters any one detection zone as outlined below.
Speed Range of Use
| Speed | MPH (km/h) |
| Minimum | 6 (10) |
| Engaged/activated | 6 (10) |
| Maximum | – (–) |
Entering from the Side
Vehicles that move into your adjacent lanes from either side of the vehicle.
Entering from the Rear
The alert will turn on when the vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of more than 27 MPH (43 km/h).
Entering from the Rear
The alert will turn on when the vehicles that come up from behind your vehicle on either side and enter the rear detection zone with a relative speed of more than 27 MPH (43 km/h).
Overtaking Traffic
The figures show the vehicle approaching (A) and passing (O) another vehicle in the overtaking lane. If you pass another vehicle slowly, the vehicle remains in the blind spot for approximately 2 seconds, the BSA warning light in the outside mirror will illuminate after 1.5 seconds. If the difference in speed between the two vehicles is greater, the warning light will not illuminate.
Other Cases
The BSA system is not designed to issue an alert on stationary objects such as guardrails, posts, walls, foliage heaps, berms, etc. However, occasionally the system may alert on such objects. This is normal operation and your vehicle does not require service.
The BSA system will not alert you of objects that are travelling in the opposite direction of the vehicle in adjacent lanes.
WARNING!
- The Blind Spot Assist (BSA) system is only an aid to help detect vehicles in the blind spot zones.
- The BSA system is not designed to detect pedestrians, cyclists, or animals.
- Even if your vehicle is equipped with the BSA system, always check your vehicle’s outside and rearview mirrors for any vehicles approaching from behind or overtaking.
- Use your turn signal before changing lanes.
System Monitoring on TFT Display
Whenever the BSA system is enabled by the user, an specific indicator is displayed in the left upper corner of the TFT display (area 22). This indicator can take on different colors depending on the system status:
stand by status (white icon);
active status (green icon).
RCP – Rear Cross Path
The Rear Cross Path (RCP) function is intended to aid the drivers when gear in reverse of parking spaces where their vision of oncoming vehicles may be blocked. The RCP system monitors the rear detection zones on both sides of the vehicle. Using sensors located on either side of the rear bumper, it detects vehicles or objects that are moving toward the side of the vehicle with a minimum speed of approximately 1 to 2 MPH (1 km/h to 3 km/h) to a maximum of approximately 10 MPH (16 km/h), such as in parking lot situations.
NOTE:
In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. Proceed slowly and cautiously out of the parking space until the rear end of the vehicle is moderately exposed. The RCP system will then have a clear view of the cross traffic. If an oncoming vehicle is detected, the RCP system will alert the driver using both the visual and audible alarms. If the radio is on, it will also reduce the radio volume.
WARNING!
Rear Cross Path (RCP) is not a Back Up Aid system. More specifically, it is intended to be used to help a driver detect an oncoming vehicle in a parking lot situation. Drivers must be careful when backing up, even when using RCP. Always check carefully behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles, obstructions, and blind spots before backing up. Failure to do so can result in serious injury or death.
BSA and RCP Setting
Setting modes can be selected from the MIA system. Touch “Settings” soft-key on “Vehicle” page and then select “Blind Spot Assist” soft-key to enter the setting page. Refer to chapter “Functions of Controls Menu on MIA” in section “Dashboard Instruments and Controls” for further information.
BSA in Visual Mode
When operating in “Visual” mode, the BSA system will provide a visual alert in the appropriate side view mirror when it detects a vehicle or an object in the detection areas monitored by its sensors: depending on the status of the relative turn indicator, the warning light can be fixed or flashing. However, when the system is operating in RCP mode, it will respond with both visual and audible alerts when an oncoming vehicle or an object approaching the rear end side of the vehicle is detected. Whenever an audible alert is requested, the radio is muted (if the radio is on). BSA in Visual and Acoustic Mode When operating in “Visual & Acoustic” mode, the BSA system will provide a visual alert in the appropriate side view mirror based on a detected vehicle or object. If the turn signal is then activated, and it corresponds to an alert present on that side of the vehicle, an audible chime will also be sounded: in the same moment the warning light will start flashing. Whenever a turn signal and detected vehicle or object are present on the same side at the same time, both the visual and audio alerts will be issued. In addition to the audible alert, the radio volume will be reduced (if the radio is on).
NOTE:
If the hazard flashers are on, the BSA system will issue the appropriate visual alert only. When the system is in RCP mode, the system shall respond with both visual and audible alerts when a detected vehicle or object is present. Whenever an audible alert is requested, the radio (if on) is also muted. Right/left turn/hazard signal status is ignored; the RCP status always requests the chime when needed.
Blind Spot Alert Off
When this function is turned off from the MIA, there will be no visual or audible alerts from either the BSA or RCP subsystems.
NOTE:
The BSA system will store the current operating mode when the vehicle is shut off. Each time the vehicle is started, the previously-stored mode will be recalled and used.
System Temporarily Unavailable
The blind spot system will become temporarily unavailable and the instrument cluster display will show the message “Blind Spot Alert Temporarily Unavailable” when the vehicle enters a radio quiet zone (example the areas around radio telescopes). The warning light on the outside rearview mirrors will be lit up and stay lit until the vehicle exits the zone.
System is Faulty
The BSA system cannot properly operate due to a fault of its components, or because the area on the rear bumper fascia where the radar sensors are located is dirty. In these cases the amber warning light and the related message will be displayed on the instrument cluster.
In these cases do not use the system and have the vehicle inspected at an Authorized Maserati Dealer.
Radar Device – Regulatory Information
The “Regulatory Information” for all the radio frequency and radar devices can be consulted by accessing the “Services” section on the website www.maserati.com.
FAQs
- What is Blind Spot Assist in the Maserati Ghibli 2023?
Blind Spot Assist is a safety feature in the Maserati Ghibli 2023 that assists the driver in monitoring and detecting vehicles in blind spot zones, which are areas adjacent to the vehicle that may not be visible in the side mirrors. - How does Blind Spot Assist work?
Blind Spot Assist monitors the adjacent lanes using sensors or cameras. If a vehicle is detected in the blind spot zone while the driver is about to change lanes, the system will alert the driver with visual or audible warnings. - Can Blind Spot Assist detect vehicles approaching at a high speed?
Blind Spot Assist is intended to detect vehicles in blind spots regardless of speed. It assists the driver in providing timely warnings to avoid potential collisions while changing lanes. - Can Blind Spot Assist work at all speeds?
Blind Spot Assist is typically capable of operating at a variety of speeds, including highway and city driving conditions. The specific speed range, however, may be determined by the system and its capabilities. - Can Blind Spot Assist detect motorcycles or bicycles?
Some advanced Blind Spot Assist systems can detect motorcycles or bicycles as well as other vehicles. However, depending on the system specifications, the detection capability may vary. - Can Blind Spot Assist be customized or adjusted?
Blind Spot Assist customization options may differ depending on the vehicle specifications. The sensitivity or warning thresholds of some vehicles can be adjusted via the vehicle’s settings or infotainment system. - Can Blind Spot Assist be disabled or turned off?
Typically, Blind Spot Assist can be turned off or adjusted through the vehicle’s settings or control panel. However, it is generally advised to keep the feature enabled for added security. - Does Blind Spot Assist work in all weather conditions?
Blind Spot Assist is intended to work in a variety of weather conditions. Extreme weather conditions, such as heavy rain, snow, or fog, may, however, impair its performance. It is critical to keep a clear view of the road and exercise caution when changing lanes. - Can Blind Spot Assist operate on curved or winding roads?
Blind Spot Assist is capable of operating on curved or winding roads as long as the adjacent lanes are within its monitoring range. However, depending on the system and road conditions, the system’s performance may vary. When changing lanes, it is critical that the driver remain alert and use turn signals. - Is Blind Spot Assist available as a standard feature in the Maserati Ghibli 2023?
The availability of Blind Spot Assist for the Maserati Ghibli 2023 may be dependent on the trim level and package selected. For more information, contact your dealership or look over the vehicle’s specifications. - Can Blind Spot Assist replace driver attentiveness?
Blind Spot Assist is a driver assistance feature that should not be used in place of driver attention. It is intended to assist the driver in monitoring blind spots, but the driver is still responsible for visually checking blind spots and making safe lane-change decisions. - Does Blind Spot Assist cover all blind spot areas around the vehicle?
Blind Spot Assist covers the blind spots adjacent to the vehicle, but it may not cover all of the blind spots surrounding the vehicle. To ensure complete awareness of the surroundings, the driver should always physically check blind spots by using side mirrors and turning their head. - Can Blind Spot Assist prevent all blind spot-related incidents?
While Blind Spot Assist can significantly reduce the risk of blind spot-related incidents, it cannot guarantee that all such incidents will be avoided. It functions as a driver aid. - Can Blind Spot Assist detect objects other than vehicles?
Blind Spot Assist is intended primarily to detect vehicles in blind spots. It may fail to detect stationary objects, pedestrians, or other hazards in the vehicle’s blind spots. When maneuvering, the driver should rely on their own observations and exercise caution. - Does Blind Spot Assist work when the vehicle is stationary?
Blind Spot Assist is usually designed to work while the vehicle is moving. When the vehicle is stationary, it may not actively monitor blind spots. However, depending on the system and its capabilities, the specific functionality may vary.
Useful Links
View Full User Guide: Maserati Ghibli 2023 User Manual | Auto User Guide
Download Manuals: On-Board Owner Documentation | Maserati
Related Article:
2023 Maserati GRECALE Specs, Price, Features, Mileage (Brochure)
2023 Maserati Granturismo Specs, Price, Features, Mileage (Brochure)
2023 Maserati Levante Specs, Price, Features, Mileage (Brochure)
2023 Maserati Quattroporte Specs, Price, Features, Mileage (Brochure)