Maserati Ghibli 2023 Instrument Cluster User Manual
Introduction
The stunning and technologically cutting-edge Maserati Ghibli 2023 Instrument Cluster improves the driving experience of this opulent sports sedan. The instrument cluster, which is a prominent part of the cockpit, offers important data and a beautiful visual display to keep drivers informed and involved on the road. The Maserati Ghibli 2023 Instrument Cluster has a sleek and contemporary appearance and was created with both style and practicality in mind. The cluster has a high-resolution digital display that blends in with the interior styling of the automobile to create a unified and aesthetically pleasing environment.
The driver receives a variety of information via the instrument cluster, ensuring they have all the required information at their fingertips. It displays important information including speed, RPM (revolutions per minute), fuel level, and engine temperature, enabling the driver to easily keep an eye on the car’s performance. The cluster also offers a personalized and simple user experience by displaying navigation instructions, audio system settings, and other adjustable options.
Instrument Cluster
The instrument cluster is divided into three main areas.
A – Analogue speedometer. It indicates the vehicle speed and displays in its interior some of the main warning lights (see “Warning and Indicator Lights” in this section).
B – Analogue tachometer. It indicates the engine revolutions and displays in its interior some of the main warning lights (see “Warning and Indicator Lights” in this section).
C – TFT display. In this area are dis-played all the other warning and indicator lights (see “Warning and Indica-tor Lights” in this section), information, signs and text and/or icon messages.
NOTE
The image shows the instrument cluster before starting the engine. U.S. Federal Regulations requires that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven.
If your odometer needs to be repaired or serviced, the repair technician should leave the odometer reading the same as it was before the repair or service. This repair should be performed by an Authorized Maserati Dealer. The odometer setting should be maintained following the repair or service. Keep a record of the odometer mileage before any repair or service to ensure that the odometer is properly reset.
TFT Display Areas
When operating, the TFT Display is divided into sectors including menus and sub-menus, running data, warning lights and messages represented in the example of picture.
The presence of some areas depends on the type of equipment and the target market. The different sectors of the display layout are rendered in the following picture.
- Main area.
- Selectable information (data, time, outside temperature, compass, etc.). When setting the “Auto Dim High Beams” function, in the right portion of this area is displayed the respective indicator.
- Main menu number and titles with scroll arrows (the number and the main menu title is always visible while scrolling the menu, and for the next five seconds).
Submenu titles. - Position within the submenus and scroll arrows (example: 1 of 5). There can be maximum 9 displayable submenu positions. When the number of submenu points exceeds 9, the points are replaced by a numerical value within the scroll arrows.
- Menu Instruction (hide-able).
- Shift lever position (P, R, N, D, M, 1,2, 3…).
- Gear shift indicator light and paddle (if equipped).
- Hard or soft suspension and Launch Control (TROFEO version only) indicator light.
- Complete odometer (total distance covered by the vehicle).
- Fuel Gauge.
- Engine Temperature Gauge.
- Reconfigurable quadrant for red telltales.
- Reconfigurable quadrant for amber telltales.
- Low beam headlights/position lights.
- Speed Warning indicator (dynamic text).
- NORMAL, I.C.E., SPORT and CORSA (TROFEO version only) modes indicator light.
- Combined telltale of ACC, LKA and ADA status. They are displayed in the cluster when one (or more) of these systems is enabled and a different menu from “Drive Assist” is displayed in the main area.
- CC and ACC status function.
- Traffic Sign Assist icons: conditioned and unconditioned speed limit and/or supplementary signs (time restriction, etc.). See “Traffic Sign Assist – TSA” in section “Driver Assistance Systems” for further details.
- Electric Parking Brake failure warning light.
- BSA and ABSA status.
TFT Display Pop up Messages
The main area of the TFT displays is the one dedicated to “pop up” messages. These pop up messages fall into several categories. The display background may change according to the type of pop up message displayed.
- No color: normal conditions.
Yellow color: low-critical warning.
Red color: high-critical warning.
Five-Second Stored Messages
When the appropriate conditions occur, this type of message appears on the main display area for five seconds and then returns to the previous screen. Most of the messages of this type are then stored (as long as the condition that activated them remains active) and can be reviewed from the “Stored Messages” main menu item. Example of this message type is the one shown in the picture.
Unstored Messages
This message type is displayed until the condition that activated the message is cleared (see example in picture).
Unstored Messages with Ignition Device in RUN
This message type is displayed until the ignition device is in RUN position. An example of this message type is the one shown in picture.
Five-Second Unstored Messages
When appropriate conditions occur, this type of message appears on the main display area for five seconds then returns to the previous screen.
Navigation Messages ( 
)
When the navigation menu is enabled on the MIA, information pop-ups will be displayed for 5 seconds while changing direction or approaching a turning point. On highway, the first pop up will be displayed at 2 miles (3.2 km) from the turn, on roadway, at 1 mile (1.6 km). While approaching the turn, further pop ups will be displayed starting at 437 yd (400 m) from the turning point and the countdown to 0 miles.
While getting closer to a turn, the sections referred to the distance already traveled will switch off while the ones referred to the distance yet to be traveled will remain on.
NOTE:
- Popup boxes might take up the space normally used to display main menu items and relevant submenus.
The distance indicated under the road name is expressed in the unit of measure set by the user.
TFT Display Setting and Menu Overview
Setting Controls
Operate the controls on the right side of the steering wheel to scroll, modify and program the main and submenu.
Press and release the multifunction switch in the 
arrow directions, corresponding to the same symbols on the TFT display, to scroll upwards and downwards the main menu titles. The screen area in sector 1 (main area) will be updated and the selected title will be shown in sector 3 (main menu number and title). Press and release the multifunction switch
, corresponding to the same symbol and the indication “SELECT” on the TFT display, to enter the information screens or a submenu. Keep the switch 
for 2 seconds to restore the selected/visualized functions. The selected sub-menu title selected will be displayed in sector 4 (submenu title).
Within a submenu, press and release the multifunction switch in the arrow directions to scroll the menu. Press the button, corresponding to the same symbol and the indication “EXIT” on the TFT display, to return to the main menu from an item of interest or from an information screen. When the driver selects a main menu page and the Traffic Sign Assist (TSA) function on “Vehicle” page of MIA is set off (see “Functions of Settings Menu on MIA” in this section), main menu title, its number and the scroll arrows will disappear after two seconds. When driver selects a main menu, if the TSA function is set on and a sign and/or a speed limit icon is displayed in sector 20, only the main menu number and the scroll arrows remain displayed in sector 3, left side.
Menu Overview
-
- MAIN MENU
VEHICLE INFO - Drive Mode
- Tire Pressure
- Gauges: Transmission Temperature, Oil Temperature and Oil Pressure
- Battery Voltage
- Maintenance
DRIVER ASSIST - Shows a specific feedback referred only to ACC, LKA and ADA drive assist systems (for each of these systems, see section ” Driver Assistance Systems”)
- LKA (LaneSense) status
TRIP & FUEL ECONOMY - Trip A: Distance, Average (fuel economy), Average (speed), Elapsed time
- Trip B: Distance, Average (fuel economy), Average (speed), Elapsed time
- Fuel Economy: Current fuel economy bar graph, Range, Average (fuel economy)
START&STOP - Messages relating to the Start &Stop function
STORED MESSAGES
VEHICLE SETTINGS - Speed Warning: enables, disables or sets the speed limit represented in the dynamic icon on the TFT display
Auto apply Off/On of the Electric Parking Brake- Screen Setup
- Upper Left
- Upper Right
- Main Menu: Line 1
- Main Menu: Line 2
- Main Menu: Line 3
- MPH km/h Display On/Off
- Main Menu Navigation
- Audio: Radio, Media and Projection Mode
- Key-On Display
- Key-Off Display
- Defaults
- MAIN MENU
How to Set TFT Display
To set the TFT display it is necessary to select the “Screen Setup” submenu from the “Vehicle Settings” menu, proceeding as follows. After having entered the “Vehicle Settings” menu, press and release the multifunction switch in the or arrow directions until “Screen Setup” is displayed. Press and release the multifunction switch to access the available items for this submenu. If the vehicle exceeds 5 MPH (8 km/h), this function is unavailable and the main screen shows possible options in grey (not activable). Operate this function with the vehicle stopped and transmission in P (Park) position. In order to enter a function, press the multifunction switch . The following directory shows the items available in this submenu:
Upper Left
- None
Compass (only with navigation system)
Outside Temperature (default: Upper Right)
Date
Time
Time/Date (default: Upper Left)
Range to Empty - None
Compass (only with navigation system)
Outside Temperature (default: Upper Right)
Date - Time
- Time/Date (default: Upper Left)
- Range to Empty
- Compass (only with navigation system) Outside Temperature (default: Upper Right)
- Date
- Time
- Time/Date (default: Upper Left)
- Range to Empty
- Average MPG (or L/100km or km/L)
- Current MPG (or L/100km or km/L)
- Trip A Distance
- Trip B Distance
Main Menu: Line 1 (only displays in Main Menu)
- None (default status)
Compass (only with navigation system)
Outside Temperature
Date
Time - Time/Date
Range to Empty
Average MPG (or L/100km or km/L)
Current MPG (or L/100km or km/L)
Trip A Distance
Trip B Distance
Audio
Main Menu: Line 2 (only displays in Main Menu)
Same configurable options as Line 1 Main Menu: Line 3 (only displays in Main Menu)
Same configurable options as Line 1 MPH km/h Display (instruction line)
On
Off
Main Menu Navigation
On
Off
Audio
Radio frequency
Media: USB and Bluetooth ® (text label only) - Projection Mode: Apple Car Play™ and Android Auto™ (text label only)
- Key-On Display
- On
Off
Key-Off Display
On: Trip summary
Off: screen with Maserati logo and trident - Defaults
- Restore
Cancel
Scroll with the switch in the or arrow directions to view the selectable items (in the example “Time” is selected). A check mark will remain next to the previously-selected item until a new selection is made.
- Press and release the multifunction switch to select an item. The notification of setting saved appears as a popup for 2 seconds, then the display will show the last-modified item.
- Press and release the button to return to the “Screen Setup” submenu. “Screen Setup” submenu parameters set by the user as the ones to be displayed are also indicated in the top part of the MIA (see example in the figures).
- As for the instruction line “MPH km/h Display”, you can either select to display it in sector 6 or not (“Off” option). In the latter case, the function of changing units remains in any case active.
If the “Main Menu Navigation” is set to “On”, navigation information will be displayed in the main area of the display only if a destination has been set on the navigator of the MIA. If function is set to “Off”, the navigation information will not be displayed ( ).
“Key-On Display” and “Key-Off Display” items allow user to set display during vehicle key-on and off. “Key-On Display” is normally set to “On”. When entering the vehicle, after the welcome screen, the display will show the information concerning engine starting sequence. While if it is set to “Off” (example shown in figure), the display will show the information displayed before last vehicle key-off.
- When engine is started and ignition device is pressed to stop it, it is possible to set “Key-Off Display”, “On” or “Off” to obtain the following display settings:
- On: Trip Summary screen (Trip B is reset after each key-on/key-off cycle);
- Off: screen with Maserati logo and trident.
The “Defaults” item of “Screen Setup” submenu allows restoring Maserati factory settings.
TFT Display: Menu and Submenu Content
MAIN MENU
Press and release the multifunction switch in the or arrow directions until this menu item is displayed. Pressing and releasing the multifunction switch will toggle the unit of measure between MPH or km/h.
Further to speed, the main area can indicate three lines that can be set to the same options and in the top right or top left area. When these three lines are present and turn-by-turn navigation is on, main menu area will automatically show navigation information. For further details, please refer to “Maserati Intelligent Assistant (MIA)” guide. Press and release the button to return to the main menu.
VEHICLE INFO
Press and release the multifunction switch in the arrow directions until this menu item is displayed. Press and release the switch to access the submenus. Press and release the multifunction switch in the or arrow directions to scroll through the following information displays pressing and releasing the multifunction switch to display the selected information.
Drive mode
Press and release the multifunction switch in the arrow directions until this menu item is displayed. The screen graphically shows the Drive Mode: I.C.E., NORMAL, SPORT, CORSA (TROFEO version only) and (Suspension) set by the user through the relevant controls . The display main area will show vehicle image with parameters and color-coded components affected by the selected drive mode. The image will show the following parameters:
- torque distribution percentage indicated under the arrow in front of the wheels (on AWD version only).
- selected drive mode (in the example shown: SPORT).
For any color-coded components, color depends on settings of: - ESC: identified by wheel color.
PowerTrain: identified by engine + transmission unit color. - Suspension
: identified by the color of the four shock absorbers.
For every drive mode, function (ESC, PowerTrain and Suspension) and color of the components shown are matched as follows: 
- NOTE:
To set drive parameters according to own needs and path, refer to chapter “Drive Mode” in section “Starting and Driving”. Press and release the button toreturn to the main menu. - Tire Pressure
Indicates the pressure of each single tire (see example below). For further information, : chapter “Tire Pressure Monitoring System (TPMS)” in section “Safety”. 
- Gauges
This screen shows the following parameters in bar graph form. - Oil Pressure
Displays the current motor oil pressure level. - Oil Temperature
Displays the current engine oil temperature level. The gauge fill and telltale (if applicable) are highlighted in red to emphasise that the parameter is at a critical level.
NOTE:
This strategy is also applicable in the “Transmission Temperature” and “Oil Pressure” information screen.
- Transmission Temperature
Displays the current transmission temperature level.
Battery Voltage
Displays the current voltage of the 12V battery.
Maintenance (service)
Displays mileage and days remaining to next frequency scheduled maintenance service.
Press and release the button to return to the main menu.
DRIVER ASSIST (if equipped)
Press and release the multifunction switch in the or arrow directions until this menu item is displayed. The screen graphically shows current status of driver assist systems: the figure shows an example with ACC and ADA ready and LKA engaged.
NOTE:
To set these systems, see chapters “Adaptive Cruise Control – ACC”, “Active Driving Assist – ADA” and “Lane Keeping Assist – LKA” in section “Driver Assistance Systems”.
Press and release the button to return to the main menu.
TRIP & FUEL ECONOMY
Press and release the multifunction switch in the arrow directions until this menu item is displayed. For each of the “Trip A” and “Trip B” sub-menus the screen will display the following:
- “Distance” traveled in miles or km. Shows the total covered distance since the last reset.
- “Average” consumption in MPG (US), MPG (UK) or l/100km. Shows the average fuel consumption since the last reset.
- “Average” speed in MPH or km/h. Shows the average speed since the last reset.
- “Elapsed Time” Shows the total time of travel since the last reset in “hours:minutes: seconds.” Elapsed Time will increment when the ignition device is in the RUN or START position.
Press the multifunction switch for 1 second and release to reset “Trip A” or “Trip B”. “Trip B” is reset after each key on/key off cycle.
The “Fuel Economy” screen will display the following: Current Fuel Economy in MPG (US), MPG (UK) or L/100km Shows the current fuel economy. During AutoStop stage performed by the Start &Stop system (see “Normal Starting of the Engine” in section “Starting and Driving”), a dash will be displayed instead of the value.
Range in miles or km
Shows the range since the last fuel average reset. When the fuel economy is reset, the display will read “Reset” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
Fuel Economy Average in MPG (US), MPG (UK) or L/100km
Shows the average fuel economy since the last reset. Press the multifunction switch for 1 second and release it to reset the fuel economy average. When the fuel economy is reset, the display will read “Reset” or show dashes for two seconds. Then, the history information will be erased, and the averaging will continue from the last fuel average reading before the reset.
Press and release the button to return to the main menu.
START & STO
Press and release the switch in the arrow directions until this menu item is displayed.
With the ignition device in RUN position, the screen will display the status of the function (see example in picture). To change the status of the function, please see chapter “Automatic Start&Stop
System” of section “Driving”.
STORED MESSAGES
Press and release the multifunction switch in the or arrow directions until this menu item is displayed. The system will either display the number of the stored messages (if any available) or “No Stored Messages” if there are no stored messages. Press and release the multifunction switch in the or arrow directions to scroll the stored messages. When the number of messages exceeds 9, the submenu points will be replaced by a numerical value indicating the message number. Press and release the multifunction switch to view the selected message (see example in the picture).
Press and release the button to return to the main menu.
VEHICLE SETTINGS
With ignition device in RUN position and vehicle stopped, press and release the multifunction switch in the or arrow directions until this menu item is displayed. Press and release the multifunction switch to access the submenus. Scroll with the multifunction switch in the or arrow directions to view the selectable items:
- Speed Warning: in order to set this feature see example below.
- Electric Parking Brake: in order to modify the status of electric parking brake, see chapter “Parking Brake” in section “Starting and Driving”.
- Screen Setup: see chapter “TFT Display Setting and Menu Overview” in this section.
Example to modify the “Speed Warning” status
NOTE:
- Minimum set speed: 20 MPH (30 km/h).
- Maximum set speed: 175 MPH (280 km/h).
When the vehicle is in motion (above 5 MPH – 8 km/h) this function is available and displayed in the list of “Vehicle Settings” menu. Scroll with the multifunction switch in the arrow directions to view the selectable items. Press and release the multifunction switch to select “Speed Warning”.
Press and release the multifunction switch once again to view the related options: “Off” is the default status.
Scroll with the multifunction switch in the arrow directions to view the selectable options. Speed values are in loop, keeping the multifunction switch pressed in the arrow directions will increase scroll speed. Press and release the multifunction switch to select the option. A check mark will remain next to the previously-selected item until a new selection is made.
A setting saved notification appears as a popup for 2 seconds and a white telltale indicating the set speed limit will appear on display.
Then the display will show the last modified item. When the set speed is exceeded, the driver is alerted by an acoustic signal and the telltale indicating the speed limit becomes amber. A pop-up message indicating that the limit has been exceeded will appear on display.
The pop-up message and the telltale will be displayed for 5 seconds then system will return to the previous screen.
FAQs
- What is the instrument cluster in the Maserati Ghibli 2023?
The digital display panel behind the steering wheel that serves as the Maserati Ghibli 2023’s instrument cluster gives the driver information about a variety of aspects of the car’s performance and status. - What type of display does the instrument cluster have?
Also known as a digital instrument cluster or a digital cockpit, the instrument cluster has a high-resolution digital display. An information-presenting screen that is customizable takes the place of the conventional analog gauges. - What information is displayed on the Maserati Ghibli 2023 instrument cluster?
The instrument cluster can show a variety of data, such as the speed of the vehicle, the RPM (revolutions per minute), the fuel level, the temperature of the engine, the gear being selected, the navigation instructions, the audio system specifications, and various driver assistance features. - Can I customize the layout and appearance of the instrument cluster?
You can customize the Maserati Ghibli 2023 instrument cluster. It is frequently possible to tailor the design, color schemes, and type of information displayed to your tastes. - Does the instrument cluster support smartphone integration or connectivity?
he Maserati Ghibli 2023 may offer smartphone integration features like Apple CarPlay and Android Auto, depending on the model and trim level. Through the instrument cluster display, you can use these features to access compatible smartphone apps and functionalities. - Can I control the instrument cluster using steering wheel-mounted controls?
The Maserati Ghibli 2023 usually comes with steering wheel-mounted controls that let you operate the menu system for the instrument cluster, choose different screens or pieces of information, and change settings without removing your hands from the wheel. - Does the instrument cluster provide driver-assistance information?
The Maserati Ghibli 2023’s instrument panel can display pertinent driver-assistance data. This could include notifications for adaptive cruise control, lane-keeping assistance, blind-spot monitoring, and collision avoidance, as well as status updates and alerts. - Are there any performance-related features on the instrument cluster?
Performance-related features like a tachometer to track engine RPM and a speedometer to show the car’s speed are frequently found in the instrument cluster. In some driving modes, it might also offer extra performance metrics like boost pressure, G-force, and lap times. - Does the instrument cluster offer a head-up display (HUD)?
Depending on the model and extra features, a head-up display (HUD) may or may not be offered. An optional HUD, which projects important information directly onto the windshield for convenient visibility, may be available on some Maserati Ghibli 2023 models. - Can I receive vehicle maintenance and service reminders through the instrument cluster?
Yes, maintenance and service reminders are frequently included in the instrument cluster. Based on the mileage or amount of time passed, it can alert you when it’s time for regular maintenance, oil changes, tire rotations, or any other scheduled service. - Does the instrument cluster provide real-time fuel efficiency data?
The instrument cluster frequently displays current fuel consumption rates or average fuel economy, providing real-time fuel efficiency data. You can use this information to track your driving patterns and make necessary adjustments to increase your fuel efficiency. - Are there any safety-related features displayed on the instrument cluster?
The instrument cluster can display information about safety features, such as tire pressure monitoring, airbag status, seatbelt reminders, and any active safety systems in use, such as stability control or antilock braking system (ABS).
Useful Links
View Full User Guide: Maserati Ghibli 2023 User Manual | Auto User Guide
Download Manuals: On-Board Owner Documentation | Maserati