Maserati Ghibli 2023 Keys User Manual
Introduction
It is not recommended to use common cleaning supplies on the Quattroporte’s interior surfaces. These products might include harsh chemicals that harm the car’s interior materials. It is best to use cleaning supplies made especially for car interiors. Use a leather cleaner made specifically for automotive leather to clean the Quattroporte’s leather seats. Use a soft cloth and the cleaner to gently wipe away any stains or dirt from the seats. It is advised to use a leather conditioner after cleaning to hydrate and safeguard the leather. It is crucial to take immediate action if there is a spill on the upholstery. Blot the spill with a clean cloth or paper towel, soaking up as much liquid as you can.
You can clean the Quattroporte’s interior with a vacuum. The best method for getting rid of dust, dirt, and debris from carpets, seats, and other surfaces is vacuuming. Pay attention to hard-to-reach areas and use the appropriate attachments for each. It is advised to keep the leather seats moisturized to stop them from drying out. Apply a leather conditioner made specifically for automotive leather on a regular basis to keep the seats soft and avoid drying out or cracking. As prolonged exposure to direct sunlight can hasten drying and fading, avoid exposing the seats to it as well. The surfaces of the Quattroporte’s interior can become damaged by direct sunlight. Long-term sun exposure can harm materials by fading, drying out, and other effects. If at all possible, park the car in a shaded area and cover the interior with a sunshade. Regularly applying a sunscreen can also lessen sun damage.
Keys
The vehicle is equipped with a Remote Keyless Entry (RKE) transmitter and a Keyless Ignition Node (KIN), to enter, start and protect the vehicle.
Keyless Ignition Device
This KIN allows the driver to operate the ignition device with the push of a button, as long as the RKE transmitter is inside the vehicle.
The ignition device has three operating setups indicated on the outer ring. Pressing and releasing the middle button, you can switch from one setup to the next without starting the engine, the switched on indication will turn amber. The engine will start by pushing the center button START/STOP with the brake pedal pressed and the device set in any of the three operating setups.
In case the ignition device does not change by pushing a button, the RKE transmitter, also called the “key fob”, may have a low or discharged battery. If this occurs it is necessary to replace the battery in order to operate the ignition device (see “Requiring and Setting Additional Key fobs” in this section). It is still possible to operate the ignition device using the key fob with discharged battery by pressing the nose side (side opposite of the emergency key) of the key fob on the START/STOP button.
Ignition Device Positions
The ignition device has three operating modes and is activated by pressing the central button only.
- Press and release the central button, to switch from one mode to the next without starting the engine: the active mode indication will light up on the outer ring.
- Push the central START/STOP button with brake pedal pressed and ignition device in any of the three operating modes, to start the engine (for more information, see the chapter “Normal Starting of the Engine” in section Starting and Driving”).
OFF: is the starting mode that enables centralized door locking from inside the vehicle, provided that all doors are closed.
ACC: puts power to accessories.
CAUTION!
Do not leave the ignition device on the ACC position for a long time before a long period of inactivity to avoid further discharging of the battery.
RUN: enables all devices and controls of the vehicle. After 30 minutes of inactivity with the ignition device in the RUN or ACC position, the transmission lever in P (Park) position and the engine off, the system turns OFF automatically in order to preserve battery life.
Key fob
This vehicle is provided with two programmed key fobs. In addition to the RKE transmitter the key fob also contains an emergency key. The emergency key allows you to open the vehicle by inserting into the lock of the opening handle on the driver’s door, in case the battery of the vehicle or the key fob go dead.
- hold the mechanical latch on the back of the key fob sideways;
- simultaneously remove the emergency key by sliding laterally towards the end of the key fob.
- NOTE:
You can insert either side of the emergency key into the lock cylinder.
Shift Ignition Device to OFF Alert
Opening the driver’s door to exit the vehicle when the ignition device is set in ACC or RUN (engine not running), a beep will remind you to cycle the ignition to OFF. In addition to the acoustic signal a dedicated message is displayed on the instrument cluster. If the ignition device is left in the ACC or RUN position, when vehicle is locked the system will turn off the instrument cluster and automatically set ignition device to OFF. With the MIA system, the power window switches, radio, power sunroof, and power outlets will remain active for up to 10 minutes after the ignition device is cycled to the OFF position. Opening either front door will cancel this function, it is possible to set the timing of this function.
NOTE:
Refer to “Functions of Settings Menu on MIA” in Section “Dashboard Instruments and Controls” for further information.
WARNING!
- When leaving the vehicle, always remove the key fob and lock your vehicle.
- Do not allow children to be in a vehicle unattended or with access to an unlocked vehicle. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake trigger, brake pedal or the shift lever.
- Do not leave the key fob in or near the vehicle, and do not leave the ignition device in the ACC or RUN mode. A child could operate power windows, other controls, or move the vehicle.
- Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
- An unlocked car is an invitation to thieves. Always remove the key fob from vehicle, cycle the ignition switch to OFF and lock all doors when leaving the vehicle unattended.
- Do not ingest battery, chemical burn hazard. This product contains a
coin/button cell battery. There is a potential chemical burn hazard. Do not ingest the battery. If the coin/button is swallowed, it can be cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Illuminated Entry/Exit
Lights will turn on and off when you enter/exit the vehicle and operate the buttons on the key fob and/or on the “Passive Entry” system as follows:
- If the unlock command is enabled by pressing the specific
button on the key fob or by the “Passive Entry” system, the “illuminated entry” mode will activate. Courtesy & dimmable internal lighting, night front seats lighting, and approach lighting will stay on for 27 seconds. 
- If the lock command of the car is enabled by pressing the specific button on the key fob or by the “Passive Entry” system, when the key fob is moved out of range, all the lights will turn off within 3 seconds, if they were previously on.
- After activating the trunk lid opening command in the possible modes (see “Trunk Lid Operation” in this section), the inner trunk light will turn on and will stay on for 10 minutes before turning off. The light will immediately turn off if you lock the trunk lid before 10 minutes.
-
Vehicle Lighting with Open/Closed Doors
- If one or more doors are open, the central light, front/rear dome lights (main and spot light), the instrument cluster, the MIA display, the night front seats lighting and the ignition device backlight will turn on and will light up for 27 seconds. If the doors are closed, all lights will turn off (within 3 seconds) with the exception of the console display and the ignition device backlight, which will turn off after 27 seconds.
- Courtesy Light with Logo
If equipped, a courtesy light with the Maserati logo can be provided on the bottom of the front doors. The illuminated logo will remain on until the door is closed.
NOTE:
The Authorized Maserati Dealer can provide you with any information about the Maserati approved “Courtesy Light with Logo”, available in the “Genuine Accessories” range.
Use of Light Switch for Vehicle
Lighting Vehicle lighting can be operated
from the key fob, the “Passive Entry” system and from the light switch on the left side of the dashboard. Refer to “Light Controls” in section “Dashboard Instruments and Controls” where it is indicated which external lights turn on according to light switch positions.
Ambient Lights and Backlight Adjustment
The ambient light and the backlight of the controls and instruments does not depend on the position of the light switch but on the detection of the ambient brightness made by the RLS solar sensor.
In “DAY” mode the backlighting of the instruments will be at 100% intensity.
while the backlighting of the switches will be at minimum. In “NIGHT” mode backlighting will be adjust via the left dimmer next to the light switch. The ambient light are adjustable in the same condition which it is possible to adjust the backlight (in “NIGHT” mode only) via the left dimmer. In all other conditions, you can activate the ambient lighting only in mode “all turned on” (Parade), turning the left dimmer upward to the second detent.
Light Dimmer Controls
The light dimmer controls are complementary to the light switch and are positioned next to the switch (see “Light Controls” in section “Dashboard Instruments and Controls” for further information).
Unlock the Vehicle with Key fob
The Remote Keyless Entry (RKE) system allows you to unlock the doors and the fuel filler door, open the trunk and turn the approach and courtesy lights on from a distance up to approximately 33 ft (10 m). The key fob does not need to be pointed at the vehicle to activate the system. See “Illuminated Entry/Exit” in this section for further information.
NOTE:
Driving at speeds of 5 MPH (8 km/h) and above disables the system from responding to all key fobs buttons.
Unlock the Doors, Fuel Filler Door and Trunk
Press and release the unlock button on the key fob once to unlock the driver’s door or twice within five seconds to unlock all doors, the fuel filler door and the trunk lid. The turn signal lights will flash for the unlock signal recognition. The illuminated entry/exit system will also turn on. See “Passive Entry System” in this section for further information.
Unlock Driver Door/All Doors with Remote Key 1st Press
This function allows you to program the system to unlock either the driver’s door or all doors, the fuel filler door and the trunk lid, by the first press of the unlock button on the key fob. To change the current setting, see “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls”.
Lock/Unlock Doors Flash Lights
This function will cause the flash of the turn signal lights when the doors are locked or unlocked with the key fob. This function can be turned on or turned off. To change the current setting, see
“Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls”. Turn Headlights On with Key fob This function activates the headlights for up to 90 seconds when the doors are unlocked with the key fob. The duration can be set as desired. To change the current setting, see “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls”.
Sound Horn when Locking the Doors with Key fob
With this function activated the horn will sound when the doors are locked with the key fob. This function can be enabled or disabled. To change the current setting, see “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls”.
Unlatch the Trunk Lid
Press the button on the key fob two times within five seconds to unlatch the trunk lid. If the vehicle is equipped with power trunk lid, besides unlocking the trunk lid, the control will fully open it.
See chapters “Passive Entry System” and “Trunk Lid Operation”” in this section for further information.
Requiring and Setting Additional Key fobs
Provide your Authorized Maserati Dealer the following when ordering additional key fob RKE transmitters:
- all key fobs RKE transmitters in your possession;
- a personal ID;
- the identification and registration documents proving ownership of the vehicle.
- Setting new key fobs or re-setting the original ones can only be performed at an Authorized Maserati Dealer.
NOTE:
Codes of any key fob RKE transmitters that are not present when the new setting procedure is done will be deleted from the memory to prevent lost or stolen key fobs transmitters being used to disarm the electronic alarm system.
Key fob Battery Replacement
NOTE:
A low charge level of the key fob battery will be indicated on the instrument cluster display. The recommended replacement battery type is: CR2032. To replace the battery proceed as follows:
- Remove the emergency key as indicated in “Keys” chapter of the current section.
Loosen the lateral screw that connects the two side covers with a torx T6 screwdriver.
- Separate the two lateral covers from the key fob case.
Separate both parts of the key fob case.
- Remove the battery from its seat and replace with a new recommended type of battery.
- ENVIRONMENTAL!
Batteries contain dangerous materials that could harm the environment. Please dispose of them according to local regulations or at an Authorized Maserati Dealer. - NOTE:
Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean with alcohol. - Match the + sign on the battery to the + sign on the inside of the battery clip, located on the back cover.
- Replace the printed circuit board by using the indicated pin for the sealing of the two covers.
- Assemble the key fob case and reassemble the two lateral covers: a click will indicate successful sealing.
Combine the disassembled parts with clamping screw and reassemble the emergency key.
Radio Frequency RKE Transmitter – Regulatory Information
The “Regulatory Information” for all the radio and radar frequency devices can be consulted by accessing the “Services” section on the website www.maserati.com.
FAQs
- Can I start the Maserati Ghibli 2023 without inserting the key?
The Ghibli does have keyless start technology, which enables you to start the engine by pressing the start/stop button as long as the key is nearby. - How do I unlock the doors if the key’s battery is dead?
If your key battery dies, you can still manually unlock the doors using the emergency key blade that is housed inside the key fob. - Can I have additional spare keys for the Maserati Ghibli 2023?
Yes, through accredited Maserati dealerships, you can get more spare keys for your Ghibli. - Can I program the keys myself, or do I need to visit a dealership?
Since key programming for the Ghibli typically requires specialized equipment, it is advised that you have it done by a Maserati dealership. - How far can I be from the car for the keyless entry system to work?
The keyless entry system typically operates within a short range of a few feet from the vehicle, though the precise range may change depending on the environment and other interference. - Can I lock the key inside the car accidentally?
A key detection system is present in the majority of Ghibli models to stop you from locking the key inside the vehicle. If the key is found inside the car, the system will warn you or keep the doors from locking. - Can I replace a lost key for the Maserati Ghibli 2023?
It is advised that you get in touch with a certified Maserati dealership if you’ve lost a key. They can help you get a replacement key and set it up to operate with your Ghibli. - Are the keys for the Maserati Ghibli 2023 waterproof?
The keys are not entirely waterproof, despite being built to withstand normal exposure to moisture or water. It is best to keep them out of water and away from too much moisture. - Can I customize the functions of the key buttons?
The owner cannot change the default functions of the key buttons, which are typically pre-programmed by Maserati. - Can I change the key battery myself?
The owner cannot change the default functions of the key buttons, which are typically pre-programmed by Maserati. - Can I use a third-party key or remote for the Maserati Ghibli 2023?
You can change the key battery on your own. A small compartment on the majority of Maserati keys can be opened to reveal the battery. For precise instructions, consult the owner’s manual or a dealership. - Can I disable the keyless entry system for security reasons?
In order to ensure compatibility and proper operation, it is typically advised to use genuine Maserati keys and remotes. It’s possible that keys from third parties lack the necessary programming or security features
Useful Links
View Full User Guide: Maserati Ghibli 2023 User Manual | Auto User Guide
Download Manuals: On-Board Owner Documentation | Maserati