Maserati Levante 2023 Maintenance Service Components User Manual

Introduction

Greetings from the world of the 2023 Maserati Levante! We will go into the maintenance service elements in this introduction to ensure the best performance and longevity of your opulent Maserati Levante SUV. Elegant appearance and thrilling performance are combined in the Maserati Levante 2023, an Italian technical marvel. The key to keeping your Levante operating smoothly and dependably is routine maintenance. To meet the unique requirements of this extraordinary car, Maserati has created a thorough servicing program. The Levante’s engine is routinely inspected and serviced as one of the main maintenance service components. The Levante 2023 has highly developed and powerful engines, and regular maintenance guarantees that they continue to operate at their peak efficiency. To ensure peak performance and ward off any problems, complete engine inspections, filter replacements, and oil changes are carried out. The inspection and upkeep of the Levante’s electrical system are another crucial component of maintenance. The Levante needs regular inspections and updates due to its sophisticated features and cutting-edge technology to make sure all electrical parts, such as the infotainment system, sensors, and safety measures, are working properly.

Additionally, Maserati emphasizes the importance of maintaining the interior and outside of your Levante. To maintain the opulent atmosphere, careful examinations, cleaning, and conditioning of the upholstery, dashboard, and other interior components are carried out. To keep the Levante’s outstanding appearance, the exterior paint, body panels, and trim are all rigorously examined and cared for. Owners of the Maserati Levante 2023 gain from the company’s experience in identifying and resolving any potential problems. In order to minimize downtime and keep your Levante on the road, any issue is quickly recognized and fixed by highly qualified experts using cutting-edge diagnostic equipment.
In conclusion, the Maserati Levante 2023 maintenance service components cover thorough examinations, maintenance, and care for the engine, electrical system, suspension, brakes, interior, and exterior. You can take advantage of the highest levels of performance, comfort, and luxury that this exceptional SUV has to offer by following Maserati’s advised maintenance program and entrusting your Levante to authorized service facilities.

Maintenance Service Components

The following images show the position of the components involved in the maintenance service.

3.8 V8 Engine – TROFEO Version

1. Engine oil dipstick.
2. Engine oil filler neck.
3. Air cleaner filters.
4. Engine coolant expansion reservoir cap.
5. Coolant reservoir cap for transmission cooling system.
6. Windshield/headlight washer fluid reservoir cap.
7. Brake fluid reservoir access cover.
8. A/C pollen filter access cover.
9. Integrated power module (fuses).

3.8 V8 Engine – MODENA S Version

1. Inspection cover to access the engine oil level dipstick
2. Engine oil filler neck.
3. Air cleaner filters.
4. Engine coolant expansion reservoir cap.
5. Coolant reservoir cap for transmis-sion cooling system.
6. Windshield/headlight washer fluid reservoir cap.
7. Brake fluid reservoir access cover.
8. A/C pollen filter access cover.
9. Integrated power module (fuses).

3.0 V6 Engines

1. Engine oil dipstick.
2. Engine oil filler neck.
3. Air cleaner filters.
4. Engine coolant expansion reservoir cap.
5. Coolant reservoir cap for transmission cooling system.
6. Windshield/headlight washer fluid reservoir cap.
7. Brake fluid reservoir access cover.
8. A/C pollen filter access cover.
9. Integrated power module (fuses).

Maintenance Procedures

The following pages contain the “required” maintenance standards determined by Maserati engineers. Besides those maintenance items specified in the “Scheduled Service Plan”, there are other components that may require service or replacement in the future. To perform most of the services, it is necessary to open the hood (see “Hood Operation” in the section “Before Starting”).

CAUTION

1. Failure to properly maintain your vehicle or perform repairs and service when necessary could result in more costly repairs, damage to other components or negatively impact vehicle performance. Immediately have potential malfunctions examined by an Authorized Maserati Dealer or a qualified repair center.
2. Your vehicle has been equipped with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes for washing as the chemicals can damage your engine, transmission, power steering or air conditioning. Such damages are not covered by the New Vehicle Limited Warranty. If a flush is needed because of component malfunction, use only the specified fluid for the flushing procedure.

Level Checks

ENVIRONMENTAL

1. The engine oils and fluids used contain substances that are dangerous to the environment. For replacement, you are advised to contact the Authorized Maserati Dealer, where all the necessary equipment is available to dispose of the used oil and fluids in compliance with the regulations in force and in an environment-friendly manner.
2. All equipment used for fluids replacement (gloves, cloths, containers, etc) must be disposed of in compliance with the regulations in force.

Engine Coolant Level Check
Your vehicle has been equipped with an improved engine coolant (antifreeze) that offers high protection against corrosion, and freezing and allows extended maintenance intervals. To prevent reducing extended maintenance periods, it is important to use the original engine coolant (antifreeze) when adding coolant throughout the life of your vehicle. When adding engine coolant (antifreeze) use pure water only, such as distilled or deionized water when mixing the water/engine coolant (antifreeze) solution. The use of impure water will reduce the amount of corrosion protection in the engine cooling system.

1. Mix a minimum solution of 50% engine coolant (antifreeze) and distilled water. Use higher concentrations (do not exceed 70%) if temperatures below − 35°F (−37°C) are forecast.

Please note that it is the owner’s responsibility to maintain the proper level of protection against freezing according to the temperatures occurring in the circulation area of the vehicle. The coolant reservoir provides a quick visual method to determine that the coolant level is adequate. As long as the engine operating temperature is satisfactory, the coolant reservoir only needs to be checked once a month. With the engine off and cold, the level of the coolant in the reservoir on the left side of the engine compartment should be between the ranges indicated on the reservoir and inside the filler neck.

1. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant reservoir after removing the cap. Do not overfill.
2. Once the desired level is reached, reassemble and firmly close cap of the reservoir.
3. If frequent engine coolant (antifreeze) additions are required, or if the level in the coolant recovery reservoir does not drop when the engine cools, the cooling system should be tested by an Authorized Maserati Dealer.
4. Keep the front of the radiator and the condenser clean.

WARNING

1. Never add engine coolant (antifreeze) when the engine is hot. Do not loosen or remove the cap of the engine coolant reservoir to cool a hot engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure.
2. When adding coolant do not use a pressure cap other than the one specified for your vehicle. Personal injury or engine damage may result.

Brake Fluid Level Check
Check the fluid level immediately if the brake system warning light and the related message turn on indicating a low level of brake fluid.

1. Remove the brake fluid reservoir access cover.
2. Clean the top of the master cylinder reservoir before removing the cap.
3. Add fluid to bring the level up to the “MAX” mark on the side of the master cylinder reservoir. Use only the manufacturer’s recommended brake fluid (see “Refilling Table” in this section).
4. Once the correct level is reached, firmly close the cap.

Normal brake pad wear could cause the fluid level to fall. However, the low fluid level may be caused by a leak too and requires accurate checkup of the braking system.

CAUTION!
The symbol  on the tank cap identifies the synthetic type of brake fluid, distinguishing it from the mineral type. Using mineral fluids damages the special rubber linings of the brake system irreparably.

CAUTION

1. To avoid contamination from foreign materials or moisture, use only new brake fluid or fluid that has been in a tightly closed container. Keep the master cylinder reservoir cap secured at all times.
2. Overfilling the brake fluid reservoir can result in spilling brake fluid. Brake fluid can also damage painted and vinyl surfaces, make sure it does not spill over these surfaces.
3. Do not allow petroleum-based fluid to contaminate the brake fluid. Brake seal components could be damaged.

Adding Windshield/Headlight Washer Fluid
The reservoir on the left side of the engine compartment contains the fluid to wash the windshield, the window liftgate, and headlights (if equipped). During scheduled services or when the message of low level of the washer fluid appears together with the related telltale add more fluid as soon as possible. Depending on the system installed in the vehicle, the fluid reservoir may contain nearly 5.3 Quarts (5 liters) of windshield/headlight washer fluid or nearly 3.7 Quarts (3.5 liters) of washer fluid.

1. Remove the reservoir cap in the engine compartment and lift the filler neck.
2. Fill the reservoir with windshield washer solvent (refer to “Refilling Table” in this section) and operate the system for a few seconds to flush out the residual water.
3. When refilling the washer fluid reservoir, apply some washer fluid to a cloth or towel and wipe the wiper blades clean. This will help blade performance.

To prevent the freeze-up of your windshield/headlight washer system in cold weather, select a solution or mixture that meets or exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers.

WARNING

1. Commercially available windshield washer solvents are flammable. They could ignite and burn you.
   Care must be exercised when filling or when working around the windshield/headlight washer system.
2. Do not drive with the windshield/headlight washer reservoir empty: the action of the washer is essential for improving visibility when driving.

Engine Oil Level Check
To assure proper lubrication of your vehicle’s engine, the engine oil must be maintained at the correct level.
If the  warning light illuminates and the related message of low oil level displays, or during scheduled services (see “Scheduled Maintenance Service” in this section) it is necessary to check the engine oil level.
The best time to check the engine oil level is about five minutes after a fully warmed-up engine is shut off or before starting the engine after it has sat overnight. In both cases, the vehicle should be parked on level ground to improve the accuracy of the oil level readings.

CAUTION

1. Do not top up with oil with different characteristics than the engine one (refer to “Refilling Table” in this section).
2. Overfilling or underfilling the oil pan will cause aeration or loss of oil pressure. This could damage your engine.
3. Do not add any supplemental materials to the engine oil. Engine oil is an engineered product, and its performance may be impaired by supplemental additives.
4. Remove the inspection cover on the right engine bank (3.8 V8 – MODENA S Version only).
5. Remove the dipstick and clean it with a dry and clean cloth.
6. Re-insert the dipstick completely and remove it: the oil level should maintain between the “MIN” and “MAX” reference ranges (SAFE range).
   
7. If refilling is necessary: unscrew the filler neck cap.
8. Adding 1.6 Quarter /1.4 liters (3.8 V8 Engines) or 1 Quart /1 liter (3.0 V6 Engines) of oil when the level is at the bottom of the SAFE range will result in the level being at the top of the SAFE range.
9. Return the cap and dipstick to their position and wait for a few minutes to allow the oil to reach the oil pan.
10. Check the level again.

Engine Oil Filter Replacement
The engine oil filter should be replaced with a new filter at every oil change. Contact the Authorized Maserati Dealer to perform this service.

Automatic Transmission Oil Check
Contact the Authorized Maserati Dealer for the oil level check.

Fluid Level Check for Coolant Transmission System
The coolant contained in the bottle of this system is the same as the one used for the cooling system of the engine. For the preparation of the mixture of water and antifreeze and for the control of the level, proceed as shown in the “Engine Coolant Level Check” of this chapter.

Engine Air Filters Replacement
Contact an Authorized Maserati Dealer to have the air filters replaced.

A/C Air Filter Replacement

This filter performs mechanic/electrostatic air filtering, provided that windows and doors are closed.
The filter is located under the hood in the external A/C system air inlet, on the passenger side of the vehicle, next to the windshield wipers. To replace the filter during the scheduled maintenance services or after the vehicle has been heavily used on dusty roads, proceed as follows:

1. Remove the access door in the cowl screen by pressing the retaining clips indicated.
2. Unsnap both ends and lift the filter retaining cover.
3. Remove the used filter slipping it off from within the air intake.
4. Install the new filter with arrows pointing in the direction of airflow, which is toward the rear of the vehicle (text and arrows on the filter will indicate this).
   
5. Close the filter retaining cover and reinstall the access door.

CAUTION!
Failure to replace the filter may considerably reduce the air conditioning and heating system efficiency.

Wiper Maintenance and Blades Replacement

Windshield Wiper Arms Lifting
When the windshield wiper arms are in rest position it is not possible to check or replace the blades as they remain under the engine hood.
To service the blades it is necessary to move the wiper arms in “Service” position (see chapter “Wipers and Washers Controls” in section “Dashboard Instruments and Controls”). In this way it is possible to lift the arms for cleaning or replacing the wiper blades.

WARNING!
It is dangerous to operate or service the wiper blades with the windshield wipers in an active position (any position different from “OFF”) and with the ignition device in the RUN position. The rain sensors may suddenly activate the wipers. Always use the “Service”  position for any intervention on the windshield wiper blades.

Windshield Wiper Maintenance
Life expectancy of wiper blades varies depending on the geographical area’s weather conditions where the car is used and frequency of use. Poor performance of blades may be present with chattering, marks on the glass, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace if necessary.
Clean the rubber edges of the wiper blades and the windshield/rear window glasses periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield.
Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc.

Spray nozzles
If the jet does not work, first check that there is fluid in the tank (see paragraph “Level checks” in this section) then check that the nozzles are not clogged.

Windshield Wiper Blades Replacement

1. Move the wiper arms into “Service” position, (see chapter “Windshield Wipers and Washers Controls” in section “Dashboard Instruments and Controls”) and lift them.
2. Press the indicated button, slip off the blade support from the arm and replace it.
   
3. Return the blade to its original position on the windshield.
4. Turn the multifunction lever to one of the automatic settings (see chapter “Windshield Wipers and Washers Controls” in section “Dashboard Instruments and Controls”) and move the ignition device to the RUN position: the wiper arms will return to the resting position.

NOTE:
Due to the difficulty of this operation, we recommend that you contact an Authorized Maserati Dealer for the replacement of the blades.

Rear Window Blade Replacement

1. To replace the rear window wiper blade on the liftgate, lift the wiper arm with blade up to the stop position.
   
2. Turn the blade to the position indicated in the figure.
3. Hold the arm steady and pull the blade, by holding it from the central support, until it is removed.
   
4. Replace the blade.
5. Insert the pivot, present inside the blade central support, in the fork-shaped end of the arm until hearing the click indicating that it is engaged.

Stretch the arm and put the blade back in contact with the liftgate window.

Front Fog Lights Adjustment
The height position of the fog light beam can be adjusted manually by turning the toothed gear to the base of the fog light assembly.

CAUTION!
Performing this operation without the necessary equipment and attention may damage the vehicle. It is advisable to contact an Authorized Maserati Dealer to perform this operation.

1. To make the adjustment it is necessary to remove the frame of the fog lamp, making force in the points indicated in the picture corresponding to the four appendices with the retaining tooth at the end.
   
2. Insert the end of a cross-head screwdriver into the bumper hole in the lower part of the fog lamp housing.
3. Turn the screwdriver handle clockwise to lower the beam (DOWN), and counterclockwise to lift it (UP).
   
4. Once the adjustment is finished, remount the fog lamp frame, centering it in the seat with the longer upper and lower appendices.

FAQs