Setting Display: Maserati Grancabrio 2017 Screen Messages Guide
At the forefront of automotive innovation, the Maserati GranCabrio Display Touch Control skillfully combines state-of-the-art technology with an opulent appearance. With its intuitive touch functionality, this advanced technology redefines the driving experience by putting control at your fingertips. With its clarity and responsiveness, the high-resolution display enthrals viewers and offers a plethora of entertainment and vehicle settings. Maserati’s attention to detail is evident in the Touch Control interface, which is designed to enhance both aesthetics and convenience. Because of its easy-to-use layout, both the driver and the passengers will experience more enjoyable driving overall. This system, which emphasises both form and function, is the epitome of Italian engineering excellence and workmanship. Discover a whole new level of control and connectivity with the Maserati GranCabrio Display Touch Control, where style and innovation blend seamlessly.
2023 Maserati Granturismo Specs, Price, Features, Mileage (Brochure)
Instruments and gauges
Fuel gauge
The illumination of the warning light inside the gauge indicates that there are approx. 7,5 litres (1.6 UK gal) of fuel in the tank. If the pointer positions 0 (beginning of scale) and the fuel reserve warning light flashes, it means that there is a system malfunction. In this case, contact the Maserati Service Network to have the system checked. 
Tachometer
It indicates the driving speed. The gauge starts providing data when 4 km/h (2.5 mph) is exceeded. 
Revolution counter
It indicates the engine RPM. Proper driving allows the driver to exploit the engine performance fully, without unnecessary overrevving. 
Coolant thermometer
It indicates the temperature of the coolant. If the needle indicates high temperatures and at the same time the warning light comes on, stop the vehicle immediately and have the cooling system checked by the Maserati Service Network. 
Display
Incorporated in the instrument panel, it performs the following functions:
- provides general information while driving;
- signals failures and warnings.
The user can interact with the system by setting the parameters for the information that can be recalled. The screen page displayed following the initial check cycle, in normal operating conditions, (standard screen page) contains the following information:
A – date
B – time
C – gear engaged
D – driving mode
E – total odometer
F – Trip odometer A, B or vehicle speed repeated
G – other symbols that may be displayed as icons
H – outside temperature.
From the set-up menu in the Multi-Media System, the user can also choose to have the information displayed for the Audio, Navigator and Telephone repeated on the dashboard. For the relevant procedures and instructions, see the “Multi-Media System” manual. 
Controls
MODE
The screen page activation and setting are controlled by pressing the MODE buttons J, “+” K and “-” L. Pressing the MODE button J briefly will switch to the following screen pages in sequence:
- Trip A.
- Trip B.
- Tyre Pressure (+).
- Left-hand front seat comfort (*).
- Right-hand front seat comfort (*).
- Option Selection.
- TPMS calibration (+).
- Standard.
(+) if equipped with a tyre pressure monitoring system (TPMS). (*) if equipped with a “Comfort Pack”. Each of these has a 10-second timing, after which the non-flashing information previously viewed is restored. Pressing the MODE button J at length (over 2 seconds) the user will select the Trip Odometer information currently displayed, or the Trip Odometer A if the tachometric repetition is active. This piece of information will flash for 10 seconds, after which the non-flashing information previously viewed is displayed once again. 
“+“ and “-”
Using the “+ “ K and “-” L buttons, the user can adjust the instrument panel brightness. When the “Option Selection” screen page is viewed, these buttons can be used to select, choosing between Trip Odometer A and Trip Odometer B, the information to be repeated on the display. By selecting, Odo A or Odo B using the MODE button J and then pressing buttons “+ “ and “-”, the user will display the trip information selected (flashing) alternately. When the “TPMS calibration” page is displayed, press the button “+” to activate the calibration process.
Trip Odometer reset
In all these cases, and before the 10-second timing has elapsed, pressing the MODE button J briefly (less than 2 seconds) will reset the trip information relating to the flashing Odometer (A or B).
Setting the date
The date can be set employing the set-up menu of the Multi-Media System (see Multi Media System Manual).
TRIP screen page
The Trip screen page is recalled by pressing the MODE button J; Each TRIP screen page (A or B) is timed, i.e. it is displayed for a maximum of 10 seconds, after which the screen page previously active is displayed once again. When the TRIP A or TRIP B feature is active, the following information is viewed on the display:
- travelled distance (km – miles)
- average fuel consumption (km/l –mpg)
- average travelling speed (km/h -mph)
- trip time (hh: mm)
- fuel range (km – miles)
The unit for fuel consumption measurement can be adjusted by the user from the Multi-Media System set-up menu. 
Tyre pressure screen page
If the vehicle is equipped with a tyre pressure monitoring system (optional), by pressing the MODE button J the user will display “Tyre Pressure” information. This screen page is displayed for 10 seconds and, in normal conditions, it will appear as shown in the figure. In addition, the system recognises the following conditions:
- the system not calibrated;
- system failure;
- low pressure or puncture in one or more tyres.
Comfort screen page If the vehicle is equipped with a “Comfort Pack”, repeatedly press the MODE button J to display the screen page showing the operating status of the heating system for each seat. The user can view the following information:
N – seat indication;
O – heating level.
This screen page remains displayed for 10 seconds, as shown in the figure. 
Option Selection Screen Page
Briefly press the MODE button J to display the screen page and select the desired value among the following ones:
- TRIP A distance;
- TRIP B distance;
- current speed repetition; the value to be set, in the F area of the display, on the Standard screen.
This screen page remains displayed for 10 seconds, as shown in the figure. The options listed can be selected by pressing the “+” and “-“ buttons and are confirmed by briefly pressing the MODE button J or simply not performing any operation for 10 seconds. 
TPMS calibration page
If: the system has not been calibrated, following replacement or reversal of one or more tyres, the warning light 
will illuminate on the instrument panel and the display will show the message warning the driver to calibrate the system. To calibrate the system, you need to select the “TPMS calibration page” by pressing the MODE button J. Subsequently press and hold button “+” to activate the calibration process. 
RPM indicator screen page
The “RPM Indicator” screen page allows the user to display, within the standard screen page, also a virtual RPM gauge. The screen page can be recalled by pressing the MODE J button repeatedly, and the options available, which can be selected by pressing the buttons + and -, are the following:
- ON (display enabled).
- OFF (display disabled).
This function is activated if the user presses the MODE J button to confirm this option. If the Audio or Navigation data repetition option is active on the Multi-Media System, when the user sets the virtual RPM indicator this setting shall be ignored until the repetition function is disabled (see section 7 “System configuration” in the Multi-Media System manual). 
Multi-Media System Configuration Menu
By accessing the Configuration mode, the user can set-up the vehicle features. The parameters that can be set are the following:
- Display configuration:
- select the colour (choosing between day/night mode or automatic setting);
- adjust the brightness.
- Sounds:
- voice control volume;
- voice synthesis setting.
- Language selection (Italian, English, Spanish, German, French, Dutch, American).
- Define the vehicle parameters:
- speed limit;
- instrument panel buzzer volume;
- door and luggage compartment locking;
- info repetition on the instrument panel;
- Stop & Go parking sensors.
FAQs
In the 2017 Maserati Grancabrio, go to the settings menu and choose the display choice to change how bright the screen is. After that, you can change the colour to your liking.
To change the language on the 2017 Maserati Grancabrio’s screen, go to the settings menu, choose “language,” and then pick the language you want to use.
The Maserati Grancabrio 2017 screen wallpaper can be changed by going to the settings menu, selecting the wallpaper option, and then picking a picture from the gallery or uploading your own.
To set up the clock on the screen of the Maserati GranCabrio 2017, go to the settings menu, choose “clock,” and then change the time zone and format as required.
Yes, you can use Bluetooth or a wire that works with the Maserati GranCabrio 2017 to connect your phone to the screen. To pair your device, just follow the on-screen instructions.
To change the screen contrast on your Maserati Grancabrio 2017, go to the settings menu, choose “display,” and then move the contrast slider to your taste.
Yes, you can reset the display settings on the 2017 Maserati Grancabrio by going to the settings menu, choosing “reset,” and then picking “display settings reset.”
To calibrate the touchscreen on the Maserati GranCabrio 2017 display, go to the settings menu, choose touchscreen calibration, and then follow the directions that appear on the screen.
This is how you change the screen timeout on the Maserati GranCabrio 2017 display: go to the settings menu, pick display, and then pick screen delay to change the length of time.
Yes, you can change how the icons are laid out on the Maserati GranCabrio 2017’s screen by going to the settings menu, picking “display,” and then picking “icon layout.”
To set up the navigation system on the Maserati GranCabrio 2017 screen, open the navigation app, type in your location, and then follow the on-screen instructions.
Yes, the Maserati GranCabrio 2017’s screen does have a mode for at night. It can be turned on in the settings menu, under “Display Options.”
Yes, you can change the audio settings right from the screen of the Maserati GranCabrio 2017. Go to the audio menu and make changes to settings like balance, bass, and treble.
To use voice orders on the Maserati GranCabrio 2017 screen, go to the settings menu and find the voice control settings. Then, follow the on-screen instructions to teach the system to recognize your voice.
Yes, you can mirror your phone’s screen onto the Maserati GranCabrio 2017’s screen if it has technology that works with it, like Apple CarPlay or Android Auto. To connect your gadget, just follow the on-screen prompts.
Useful Links
View Full PDF: 2017 Maserati Grancabrio Owner’s Manual|Auto User Guide
2017 Maserati Grancabrio Fuses and Fuse Box User Guide
2023 Maserati Granturismo Specs, Price, Features, Mileage (Brochure)