Maserati Quattroporte 2023 Memorize the Driver’s Seat Position User Manual
Introduction
Introducing the Maserati Quattroporte 2023, a vehicle that elevates the driving experience by fusing luxury and tech. One of its many amazing capabilities, the capacity to memorize the driver’s seat position, stands out in particular. With the help of this cutting-edge technology, the seat in the Quattroporte will always adjust to your preferences, offering the highest level of comfort and convenience. The interior of the Quattroporte embraces a harmonic fusion of elegance and sophistication and was designed with painstaking attention to detail. Unmatched comfort is provided by the driver’s seat, which was made using high-quality materials and skilled craftsmanship. But its sophisticated memory feature is what really makes it stand out.
The Quattroporte’s remember driver’s seat position feature makes it simple to save and recall your favorite seat settings. You can easily store your optimum driving position by pressing a button after you’ve discovered it, whether it’s the ideal seat height, lumbar support, or seatback angle. The advanced system in the automobile then remembers your preferences and associates them with your individual profile. You can count on the Quattroporte’s driver’s seat to automatically adjust to your remembered settings the next time you get in, whether it’s after a short break or a longer absence. Never again will you have to struggle to make manual adjustments or find the ideal driving position. Your selections are remembered by the Quattroporte, allowing you to concentrate on the fun of driving.
Memorize the Driver’s Seat Position
This function allows the driver to store up to two different memory profiles for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, external side mirrors, adjustable pedals (if equipped), power tilt and telescopic steering column and a set of programmed radio stations. Your key fob can also be set to recall the same positions by pressing the 
button.
NOTE:
- Only one key fob can be linked to each of the memory positions.
- “Passive Entry” door handles cannot be linked to the memory function. Use either the memory recall switch or the key fob (if linked to the memory function) to recall memory positions 1 or 2.
- The memory seat switch is located on the driver’s door trim panel. The switch consists of three buttons:
- The “S” (SET) button, which is used to activate the memory save function.
- The “1” and “2” buttons which are used to recall either of two programmed memory profiles.
Memory Profiles Setting
NOTE:
Saving a new memory profile will erase an existing profile from memory. To create a new memory profile, perform the following:
- Cycle the ignition device to the ACC or RUN position.
- Adjust all memory profile settings to desired preferences (i.e., seat, side mirrors, adjustable pedals (if equipped), power tilt and telescopic steering column, and radio station presets).
- Press and release the “S” button on the memory switch.
- Within 5 seconds, press and release the memory button “1” or “2”.
- Check on the instrument cluster for the positive response of the actions
“Memory 1 (or 2) profile set”.
After these steps, the profile set will be memorized in the selected position.
NOTE:
Memory profiles can be set without the vehicle in P (Park), but the vehicle must be in P (Park) to recall a memory profile.
Pairing Remote Keyless EntryTransmitter to Seats Memory
Your key fob can be programmed to recall one of two programmed memory profiles by pressing the button on the key fob.
NOTE:
This function can be enabled or disabled using the MIA system, refer to “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls” for further information.
To program your key fobs, perform the following actions:
- Cycle the ignition device to the RUN position.
- Move the seat and/or the other adjustable devices in the position that you wish to memorize, or recall a previously memorized profile, pressing the corresponding memory button “1” or “2”.
Cycle the ignition device to the OFF position. - Press and release the “S” button.
- Within 5 seconds, press and release the memory button “1” or “2”.
- Press and release the button on key fob.
- Within 3 seconds, press and release the button on the key fob.
- To check if the system has memorized the correct profile, you can move the seat and press the button: the seat will move to the memorized position.
NOTE:
Your key fobs can be unlinked to your memory settings by pressing the “S” button followed by the button on the key fob.
Memory Position Recall
NOTE:
The vehicle must be in P (Park) to recall memory positions. If a recall is attempted when the vehicle is not in P (Park), a message will display in the instrument cluster. To recall the memory settings for driver, press memory button number “1” or “2” on the driver’s door trim panel or the button on the key fob linked to memory position “1” or “2” with ignition device in the RUN position.
A recall can be canceled by pressing any of the buttons (“S”, “1”, or “2”) during a recall. When a recall is canceled, the driver seat, external side mirrors, adjustable pedals (if equipped), and power tilt and telescopic steering column stop moving. A delay of at least one second will occur before selecting a new recall.
Easy Entry/Exit Driver Seat
This function provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. The distance the driver seat moves depends on where you have the driver seat positioned when you place the ignition device to the OFF position.
- When you cycle the ignition to the OFF position the driver seat:
- will move about 2.36 in (60 mm) rearward if the driver seat position is greater than or equal to ca. 2.67 in (68
mm) forward of the rear stop; will move to a position of ca. 0.31 in
(8 mm) rearward of the rear stop if the driver seat position is between 0.09 in (23 mm) and 2.67 in (68 mm) forward of the rear stop. - The seat will return to its previously set position when you place the ignition into the ACC or RUN position.
- The easy entry/easy exit function is disabled when the driver seat position is less than 0.9 in (23 mm) forward of the rear stop. In this position, there would be no benefit to the driver by moving the seat for easy exit or easy entry. Each stored memory setting will have an associated easy entry/ exit position.
NOTE:
The “Easy Entry/Easy Exit” function can be enabled or disabled using the MIA system, refer to “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls” for further information.
FAQs
- Can I adjust the driver’s seat position in the Maserati Quattroporte 2023?
You can find your preferred seating position in the Maserati Quattroporte 2023’s adjustable driver’s seat. - How many-way power adjustable is the driver’s seat in the Maserati Quattroporte 2023?
The Maserati Quattroporte 2023 typically comes with 12-way power adjustment for the driver’s seat, which includes options for seat height, cushion tilt, and lumbar support. - Can I save my preferred driver’s seat position in the Maserati Quattroporte 2023?
The driver’s seat position can be stored in the Maserati Quattroporte 2023 frequently. This makes it convenient if there are multiple drivers using the car because it enables you to save and recall your preferred settings. - Are the driver’s seats in the Maserati Quattroporte 2023 heated?
In the Maserati Quattroporte 2023, the driver’s seat frequently has heating capabilities, enabling you to rewarm the seat in colder weather. - Are the driver’s seats in the Maserati Quattroporte 2023 ventilated?
Yes, the Maserati Quattroporte 2023 comes with ventilated driver’s seats in some trim levels. This feature allows air to circulate through the seat, keeping you cool and comfortable during warm weather. - Do the driver’s seats in the Maserati Quattroporte 2023 have a massage function?
The particular trim level or optional packages may have an impact on whether the driver’s seat has a massage function. For the most precise information, it is best to contact the Maserati dealership. - Can I adjust the lumbar support on the driver’s seat of the Maserati Quattroporte 2023?
The driver’s seat of the Maserati Quattroporte 2023 typically has lumbar support that is adjustable. To meet your comfort requirements, you can change the amount of lumbar support. - Can I adjust the thigh support on the driver’s seat of the Maserati Quattroporte 2023?
The options selected and the seat’s design can affect how the thigh support is adjusted. Although some Maserati Quattroporte 2023 models have adjustable thigh support, it’s best to double-check this with the producer or dealer. - Can I adjust the side bolsters on the driver’s seat of the Maserati Quattroporte 2023?
The side bolsters on the driver’s seat of some Maserati Quattroporte 2023 models are movable. With the help of this feature, you can adjust the seat’s lateral support. - Does the driver’s seat in the Maserati Quattroporte 2023 have a memory foam feature?
Depending on the specific trim level or optional packages, the driver’s seat may have memory foam or not. To find out if this feature is offered, it is advisable to speak with the manufacturer or the dealership. - Can I adjust the headrest position on the driver’s seat of the Maserati Quattroporte 2023?
The headrest in the driver’s seat of the Maserati Quattroporte 2023 can be adjusted quite frequently. To ensure the best possible comfort and support, you can adjust its position. - Are the driver’s seats in the Maserati Quattroporte 2023 equipped with a power lumbar support adjustment?
The Maserati Quattroporte 2023 typically comes with a power-adjustable lumbar support in the driver’s seat. Using the seat controls, you can modify the lumbar support’s intensity. - Can I extend the seat cushion on the driver’s seat of the Maserati Quattroporte 2023?
Depending on the seat design and options selected, the driver’s seat cushion may or may not be able to be extended. For precise information, it is advised to speak with the manufacturer or dealership. - Are the driver’s seats in the Maserati Quattroporte 2023 equipped with a built-in seat massager?
The particular trim level or optional packages may have an impact on whether a built-in seat massager is available. For the most precise information, it is advisable to contact the manufacturer or dealership. - Can I control the driver’s seat position in the Maserati Quattroporte 2023 using a smartphone app?
Although Maserati vehicles frequently offer cutting-edge connectivity options like smartphone integration, controlling the driver’s seat position via a specialized app might not be a common feature. For the most recent details on features that are currently offered, it is advised that you speak with the manufacturer or dealership.
Useful Links
View Full User Guide: Maserati Quattroporte 2023 User Manual | Auto User Guide
Download Manuals: On-Board Owner Documentation | Maserati