Maserati Quattroporte 2023 Wiper and Washer User Manual
Introduction
The excellent luxury sedan Maserati Quattroporte 2023 is renowned for its grace, power, and attention to detail. Its sophisticated wiper and washer system is one essential element of the Quattroporte’s design that guarantees both safety and convenience. The wiper and washer system of the Quattroporte 2023 is a tribute to Maserati’s commitment to delivering an exceptional driving experience. It was created to give optimal sight in a variety of weather conditions. The Quattroporte 2023’s wiper system uses cutting-edge technology to keep the driver’s view clean at all times, even in adverse weather conditions. The wiper blades effectively sweep across the windshield, removing precipitation, snow, dust, and debris whether it is a severe downpour or a little drizzle. In order to minimize streaks and ensure maximum visibility, the blades are painstakingly designed to maintain ideal contact with the glass.
The Quattroporte 2023 has a complex washing system in addition to the wiper system. The washer jets are positioned carefully to spray washer fluid onto the windshield with accuracy and force, assisting the wipers in thoroughly removing any clinging grime or dirt. A straightforward switch may easily turn on the washer system.
Wiper and Washer
The multifunction lever is located on the left side of the steering column. The multifunction lever operates the windshield wipers and washer when the ignition device is placed in RUN or ACC position. A windshield washer low fluid level is indicated by the 
warning light and by the message on the instrument cluster.
To refill the fluid, see “Maintenance Procedures” in section “Maintenance and Care”.
CAUTION!
- Turn the windshield wipers off when driving through an automatic car wash. The windshield wipers may be damaged if the wiper control is left in any position other than “OFF”.
- In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, the wiper motor may be damaged when the vehicle is restarted.
- Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position. If the windshield wiper control is turned off and the blades cannot return to the off position, the wiper motor may be damaged.
Windshield Wipers
- Rotate the end of the multifunction lever to one of the four settings to activate the automatic intermittent setting (see “Rain Sensing Windshield Wipers” paragraph in this chapter).
- For low speed wiper operation (stable position “LO”): rotate the end of the multifunction control lever forward to the first trigger after the intermittent setting.
- Rotate to the second trigger after the intermittent setting for high-speed
(stable position HI) wiper operation.
Rotate the end of the lever downward to the “MIST” position to activate a single wipe cycle. The wipers will continue to operate until you release the multifunction lever.
The wipers will continue to operate until you release the multifunction lever.
To turn the wipers off rotate the lever to “OFF”.
- Rain Sensing Wipers
This function detects moisture on the windshield through an internal rearview mirror integrated sensor, which automatically activates the relative wipers. Rotate forward the end of the multifunction lever to one of four settings to adjust the detection system. First wiper delay position is the least sensitive, and fourth wiper delay position is the most sensitive. Third position should be used for normal rain conditions. The rain sense wipers will automatically change between an intermittent wipe, slow wipe and a fast wipe depending on the amount of detected moisture sensed by a particular area of the windshield. Place the wiper switch in the “OFF” position when you do not want to use the automatic intermittent system. The rain sensing function can be turned on and off using the MIA system, see “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls” for further information. - CAUTION!
- The rain sensing function may not function properly by ice or dried salt water on the windshield.
- Use on the windshield of RainX® or products containing wax or silicone may reduce rain sensor performance.
The rain sensing system has protective functions for the wiper blades and arms. It will not operate under the following conditions:
- Low temperature wipe inhibit: the rain sensing function will not operate when the ignition device is in RUN position, the vehicle is stationary and the outside temperature is below 32 °F (0 °C). To resume, set the automatic function on the multifunction lever, start the engine and drive or wait until the outside temperature rises above freezing.
- Wipe inhibit with transmission in N (Neutral) position: the rain sensing function will not operate when the ignition device is placed in the RUN position, the transmission shift lever is in the N (Neutral) position and the vehicle speed is less than 5 MPH (8 km/h). To resume, set the multifunction lever to the automatic function or move the shift lever out of N (Neutral).
Headlights On with Wipers
When activating this function, the headlights will light up approximately 10 seconds after the wipers acting on the windshield are turned on if the light switch is placed in “AUTO” position.
In addition, the headlights switch off when the wipers are turned off (position “OFF”) if they were previously turned by using this function. Powering on Headlights with wipers can be activated and deactivated with the MIA system, see “Functions of Settings Menu on MIA” in section “Dashboard Instruments and Controls” for further information.
Wiper Blade Maintenance
When the wiper arms acting on the windshield are in the rest position it is not possible to check or replace the blades (Service position) as they are folded under the hood. To service the blades (see paragraph “Wiper Maintenance and Blades Replacement” in chapter “Maintenance Procedures” of section “Maintenance and Care”) it is necessary to shift the multifunction lever to “OFF” and the ignition device to OFF position. Shift the control lever within 15 seconds to the “MIST” position (forward rotation of the end of the multifunction control lever) and release. The blades are brought in a position enabling to open the wiper arms and change the blades.
It is possible to use the “MIST” position for a maximum of 3 times within two minutes, corresponding to different three blades positions on the windshield. When completed, bring the ignition device in RUN: the arms will reposition. If necessary move the multifunction lever to other required operating positions.
WARNING!
Operate or service the windshield wiper blades without deactivating the wipers (“OFF” position), leaving the ignition device in RUN can be dangerous for the operator since the rain sensor may suddenly activate the wipers. Always use “Service” position for any intervention on the windshield wiper blades.
Windshield Washers
To use the washer, push the end of the multifunction lever inward (toward the steering column) and hold it as long as washer spray is desired . If you activate the washer while the windshield wiper control is in the automatic intermittent range, the wipers will operate for two wipe cycles after releasing the lever and then resume the previously selected intermittent interval. If you activate the washer while the windshield wiper is turned off (“OFF” position) the wipers will operate for three wipe cycles and then turn off.
WARNING!
- Do not start the windshield washer during the cold months until the windshield has warmed up. If it has not warmed up, the liquid could freeze on the glass and block your view.
- Sudden loss of visibility through the windshield could lead to a collision. You might not see other vehicles or other obstacles. To avoid sudden icing of the windshield during freezing weather, warm the windshield with the defroster before and during windshield washer use.
Heated Windshield Washer Nozzles
To avoid fluid freezing inside at low external temperatures, the fluid supply nozzles can be heated by internal resistors.
Analog Clock
To adjust the analog clock located on the center of the dashboard between the air outlets, use the MIA system (see “Functions of Settings Menu on MIA” in this section).
The time can be visualized also on the MIA upper status bar and on the instrument cluster display (see “Functions of Settings Menu on MIA” in this section). Clock lighting works in the same way as instrument and controls backlighting (refer to “Interior Lighting” in section “Understanding the Vehicle”).
FAQs
- How do I activate the windshield wipers in the Maserati Quattroporte 2023?
The wiper control stalk is on the right side of the steering column. The stalk controls wiper speed. Pulling the stalk toward you activates the windshield washer. - Are there adjustable intermittent wiper settings in the Maserati Quattroporte 2023?
The Maserati Quattroporte 2023 has adjustable intermittent wipers. The wiper control stalk usually has a variable intermittent setting to adjust wipe delay. - How do I activate the rear windshield wiper in the Maserati Quattroporte 2023?
The wiper stalk activates the rear windshield wiper. Find a separate control or rotate the stalk to a rear wiper setting. - Can I use the windshield washer without activating the wipers in the Maserati Quattroporte 2023?
Pulling the wiper control stalk toward you and releasing it usually activates the windshield washer without the wipers. This sprays windshield washer fluid without wiping. - Does the Maserati Quattroporte 2023 have rain-sensing wipers?
The Maserati Quattroporte 2023 may have optional rain-sensing wipers. Rain-sensing wipers adjust speed based on windshield sensors’ rainfall detection. - How do I manually adjust the wiper speed in the Maserati Quattroporte 2023?
The wiper control stalk controls wiper speed. The stalk controls wiper speed. The stalk controls wiper speed. - Are there heated windshield wipers in the Maserati Quattroporte 2023?
Most cars, including the Maserati Quattroporte 2023, do not have heated windshield wipers. Some models have heated wiper blades or elements to prevent ice and snow buildup. - Can I adjust the angle or position of the windshield wipers in the Maserati Quattroporte 2023?
Most cars, including the Maserati Quattroporte 2023, have fixed windshield wiper angles. The wipers’ windshield contact is optimized for wiping. - How do I activate the headlight washer system in the Maserati Quattroporte 2023?
The Maserati Quattroporte 2023 may have headlight washers. The windshield washer system and headlights activate the system automatically. Washer fluid cleans headlights. - Are there automatic wipers that adjust based on the amount of rainfall in the Maserati Quattroporte 2023?
The Maserati Quattroporte 2023 may have rain-adaptive wipers. Rain-sensing wipers automatically adjust wiper speed based on windshield sensors. - How do I activate the windshield defogger in the Maserati Quattroporte 2023?
A button or climate control setting activates the windshield defogger. Find a windshield defroster button or option. - Can I adjust the sensitivity of the rain-sensing wipers in the Maserati Quattroporte 2023?
Some cars have adjustable rain-sensing wipers. If available, consult the car’s manual or Maserati to adjust the rain-sensing wipers’ sensitivity. - How do I activate the automatic wipe and wash feature in the Maserati Quattroporte 2023?
Pushing the wiper control stalk forward and quickly releasing it activates the automatic wipe and wash feature. This starts a windshield wipe and wash cycle. - Can I manually lift the windshield wipers off the windshield in the Maserati Quattroporte 2023?
Most vehicles, including the Maserati Quattroporte 2023, cannot manually lift the windshield wipers. Let the wipers rest. - How do I refill the windshield washer fluid in the Maserati Quattroporte 2023?
The windshield washer fluid reservoir is under the hood. Remove the cap and fill the washer fluid reservoir to the right level. Avoid spilling fluid on engine components.
Useful Links
View Full User Guide: Maserati Quattroporte 2023 User Manual | Auto User Guide
Download Manuals: On-Board Owner Documentation | Maserati