2018 Mazda CX-9 Owner’s Manual

The 2018 Mazda CX-9 is a refined and roomy three-row SUV that combines luxury comfort and dynamic performance in a seamless way. In keeping with Mazda’s design philosophy, the new CX-9 has a sleek exterior and a luxurious interior that can easily fit seven people. The CX-9 has a responsive turbocharged engine and a good mix of power and fuel economy, which makes it a great choice for both short and long trips. Inside, its high-end cabin is filled with modern technology, high-quality materials, and advanced safety features that make driving for the whole family safe and fun. The 2018 Mazda CX-9 is a good choice for people who want a stylish and capable SUV for their families. It has a sleek design, flexible seating, and a focus on offering a high-quality driving environment.

Interior Features

Operating Tips

• Operate the climate control system with the engine running.
• To prevent the battery from being discharged, do not leave the fan control switch on for a long period of time with the ignition switched ON when the engine is not running.
• Clear all obstructions such as leaves, snow, and ice from the hood and the air inlet in the cowl grille to improve the system efficiency.
• Use the climate control system to defog the windows and dehumidify the air.
• The recirculate mode should be used when driving through tunnels while in a traffic jam, or when you would like to shut off outside air for quick cooling of the interior.
• Use the outside air position for ventilation or windshield defrosting.
• If the vehicle has been parked in direct sunlight during hot weather, open the windows to let warm air escape, then run the climate control system.
• Run the air conditioner for about 10 minutes at least once a month to keep internal parts lubricated.
• Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient.
• The refrigerant specifications are indicated on a label attached to the inside of the engine compartment. If the wrong type of refrigerant is used, it could result in a serious malfunction of the air conditioner. Consult a professional, government-certified6 repairer for the inspection or repair because a special device is required for the air conditioner maintenance.
  For details, consult an Authorized Mazda Dealer.

Vent Operation (Front)
Adjusting the Vents Directing airflow
To adjust the direction of airflow, move the adjustment knob.
NOTE

• When using the air conditioner under humid ambient temperature conditions, the system may blow fog from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.
• The air vents can be fully opened and closed by operating the dial. (Side vents only)

NOTE: The location airflow exits the air vents and the airflow amount may change depending on the open or close status of the air vents.

Control Switches AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled in accordance with the selected set temperature:

• Airflow temperature
• Amount of airflow
• Selection of airflow mode
• Outside/Recirculated air selection
• Air conditioner operation

NOTE: AUTO switch indicator light

• When on, it indicates auto operation, and the system will function automatically.
• If any of the following switches are operated while in auto control, the AUTO switch indicator turns off.
• Mode selector switch
• Fan control switch
• Windshield defroster switch
• The functions for switches other than those operated continue to operate in auto control.

OFF switch
Pressing the OFF switch shuts off the climate control system.

Temperature control dial
This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold.

• When the DUAL switch is off: Turn the driver temperature control dial to control the temperature throughout the entire cabin.
• When the DUAL switch is on: Turn the driver or front passenger temperature control dial to independently control the temperature on each side of the cabin.

NOTE

• The climate control system changes to the individual operation mode (DUAL switch indicator light illuminated) by turning the front passenger temperature control dial even when the DUAL switch is off, which allows individual control of the set temperature for the driver and front passenger.
• The temperature units for the temperature setting display can be changed in conjunction with the temperature units for the outside temperature display.
• Type A instrument cluster: Refer to Outside Temperature Display.
• Type B instrument cluster: Refer to Outside Temperature Display (Without Multi-information display).

Fan control switch
The fan has seven speeds. The selected speed will be displayed.

Mode selector switch
NOTE

1. With the airflow mode set to the position and the temperature control dial set at a medium temperature, heated air is directed to the feet and air at a comparably lower temperature will flow through the central, left and right vents.
2. To set the air vent to , press the windshield defroster switch.
3. In the or position, the air conditioner is automatically turned on and the outside air position is automatically selected to defrost the windshield. In the or position, the outside air position cannot be changed to the recirculated air position.

A/C switch
Pressing the A/C switch while the AUTO switch is turned on will turn off the air conditioner (cooling/dehumidifying functions).
The on/off of the air conditioner switches each time the A/C switch is pressed.
NOTE

• The air conditioner operates when the A/C switch is pressed while the air conditioner is turned off.
• The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).

Air intake selector
Outside or recirculated air positions can be selected. Press the switch to select outside/recirculated air positions.
Recirculated air position (indicator light illuminated)
Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.
Outside air position (indicator light turned off)
Outside air is allowed to enter the cabin. Use this mode for ventilation or windshield defrosting.

WARNING: Do not use the recirculated air position in cold or rainy weather:
Using the recirculated air position in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
DUAL switch
Use the DUAL switch to change the mode between the individual operation (driver and passenger) and interconnection
(simultaneous) modes.
Individual operation mode (indicator light illuminated)
The set temperature can be controlled individually for the driver and front passenger.

Operation of Automatic Air Conditioner

• Press the AUTO switch. Selection of the airflow mode, air intake selector and amount of airflow will be automatically controlled.
• Use the temperature control dial to select a desired temperature.
• Press the DUAL switch or turn the front passenger temperature control dial to control the set temperature individually for the driver and front passenger. To turn off the system, press the OFF switch.

NOTE

• Setting the temperature to maximum hot or cold will not provide the desired temperature at a faster rate.
• When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.

Windshield Defrosting and Defogging
Press the windshield defroster switch. In this position, the outside air position is automatically selected, and the air conditioner automatically turns on. The air conditioner will directly dehumidify the air to the front windshield and side windows. Airflow amount will be increased.

WARNING: Set the temperature control to the hot or warm position when defogging ( position):

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident.

NOTE: Use the temperature control dial to increase the air flow temperature and defog the windshield more quickly.

Sunlight/Interior Temperature Sensor
Do not place objects on the sunlight sensor. Otherwise, the interior temperature may not adjust correctly.

Interior temperature sensor
Do not cover the interior temperature sensor. Otherwise, the interior temperature may not adjust correctly.

Vent Operation (Rear)

Adjusting the Vents
You can direct air flow by moving the adjustment knob.
NOTE: When using the air conditioner, mist may come out from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

Operation from front seats

1. Turn the front air conditioner on.
2. Press the rear switch. The rear air conditioner operates.
3. Selection of the airflow mode, airflow amount and temperature will be automatically controlled to the same temperature setting as the front air conditioner for the driver’s side. NOTE
   • If the AUTO switch is pressed while the front A/C switch is off, the rear air conditioner operates only to circulate air.
   • Setting the temperature to the maximum high or low will not provide the desired temperature at a faster rate.
   • When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
   • When the rear air conditioner is controlled to the same temperature setting as the front air conditioner for the driver’s side, “SYNC” is displayed on the rear screen.

Operation from rear seats

1. Turn the front air conditioner on.
2. Press the AUTO switch. The selection of the airflow mode and airflow amount will be automatically controlled.
3. Use the temperature control switch to set the desired temperature.

NOTE

• If the AUTO switch is pressed while the front A/C switch is off, the rear air conditioner operates only to circulate air.
• Setting the temperature to the maximum high or low will not provide the desired temperature at a faster rate.
• When selecting heat, the system will restrict airflow until it has warmed to prevent cold air from blowing out of the vents.
• When the rear air conditioner is operated automatically, “AUTO” is displayed on the rear screen.
• When the rear air conditioner is controlled to the same temperature setting as the front air conditioner for the driver’s side, “SYNC” is displayed on the rear screen. To turn off the system, press the OFF switch.

FAQ’s