2020 Mazda CX-5 Instrument Cluster System | How to use Display
The advanced and driver-focused instrument cluster system of the 2020 Mazda CX-5 improves the overall driving experience. With a high-resolution digital display screen complementing an analogue speedometer in the centre, this cluster blends analogue and digital components. Drivers are guaranteed to have access to vital information with the digital display, which offers vital data including vehicle speed, fuel levels, trip information, navigation instructions, and safety alarms. An easy-to-use and educational instrument cluster is produced by the deliberate fusion of analogue and digital components, improving driver awareness and convenience while appreciating the beauty of Mazda’s well-liked SUV.
2024 MAZDA CX-50 Specs, Price, Features, Mileage (Brochure)
Instrument Cluster and Display
Instrument Cluster (Type A)
- Speedometer.
- Tachometer
- Multi-information Display (Type A
- Engine Coolant Temperature Gauge
- Fuel Gauge
- Dashboard Illumination
- Speed Unit Selector
Speedometer
The speedometer indicates the speed of the vehicle.
Tachometer
The tachometer shows engine speed in thousands of revolutions per minute (rpm).
CAUTION
Do not run the engine with the tachometer needle in the RED ZONE.
This may cause severe engine damage.
NOTE
When the tachometer needle enters the STRIPED ZONE, this indicates to the driver that the gears should be shifted before entering the RED ZONE.
Multi-information Display (Type A)
The multi-information display indicates the following information.
-
Speedometer
-
Odomete
-
Trip meter
-
Outside temperature
-
Distance-to-empty
-
Average fuel economy
-
Current fuel economy
-
Maintenance Monitor (Except SKYACTIV-D 2.2)
-
Remaining Diesel Exhaust Fluid (DEF) and Maximum Driving Distance Display (SKYACTIV-D 2.2)
-
Blind Spot Monitoring (BSM) Display
-
Traffic Sign Recognition System (TSR) Display
-
Distance Recognition Support System (DRSS) Display
-
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) System Display
-
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display
-
Compass Display
-
Door-Ajar/Liftgate-Ajar Warning Indication
-
Message Display
The screen content changes each time the INFO switch is pressed.
The screen content changes each time the selector knob is pressed and held.
2024 MAZDA CX-50 Specs, Price, Features, Mileage (Brochure)
Odometer, Trip Meter and Trip Meter Selector
The odometer is constantly displayed on the screen when the ignition is switched ON, and the TRIP A or TRIP B screen can be displayed by operating the INFO switch.
Odometer
The odometer records the total distance the vehicle has been driven.
Trip meter
The driving distance for a specified interval is indicated. Two types (TRIP A, TRIP B) of interval distance and the average fuel economy for each can be measured. For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled. When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed. The trip meter and average fuel economy can be reset by pressing the INFO switch for 1.5 seconds or more while in each mode.
NOTE
-
Only the trip meters record tenths of kilometers (miles).
-
The trip record will be erased when:
-
The power supply is interrupted (blown fuse or the battery is disconnected).
-
- The vehicle is driven over 9999.9 km (mile).
Engine Coolant Temperature Gauge
Displays the engine coolant temperature. The blue range of the gauge indicates that the engine coolant temperature is low, and the red range of the gauge indicates that the engine coolant temperature is high and overheating.
CAUTION
If the engine coolant temperature gauge needle is in the red range, there is the possibility of overheating. Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.
NOTE
- (SKYACTIV-G 2.5T, SKYACTIV-D 2.2) If the engine coolant temperature is high or the engine is hot, the engine output may be limited.
- During normal driving, the engine coolant temperature stabilizes at 100 °C (210 °F) or less, and the gauge indicates a range lower than 100 °C (210 °F).
Fuel Gauge
The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON. We recommend keeping the tank over 1/4 full.
If the low fuel warning light illuminates or the fuel level is very low, refuel as soon as possible. If inconsistency in engine performance or stalling occurs due to low fuel level conditions, refuel the vehicle as soon as possible and add at least 10 L (2.7 US gal, 2.2 Imp gal) of fuel.
FAQs
The Instrument Cluster System in the 2020 Mazda CX-5 is the digital display panel that provides important information to the driver, such as speed, fuel level, and various vehicle status indicators.
The 2020 Mazda CX-5 features a digital LCD display in its instrument cluster for clear and customizable information.
Yes, the instrument cluster in the 2020 Mazda CX-5 allows you to customize the information displayed, such as navigation directions, trip information, and ore.
You can access the customization options through the vehicle’s infotainment system or by using the controls on the steering wheel.
The instrument cluster can display information related to various driver-assistance features, including adaptive cruise control, lane-keeping assist, and blind-spot monitoring.
Yes, it provides real-time fuel efficiency data to help you monitor your driving habits and optimize fuel economy.
Yes, the instrument cluster has a night mode that adjusts the brightness for nighttime driving.
Yes, important notifications and alerts, such as maintenance reminders and safety warnings, can be displayed on the instrument cluster.
You can switch between display modes using the controls on the steering wheel or by accessing the settings in the infotainment system.
Yes, it can display information about tire pressure, helping you to keep your tires properly inflated.
The digital instrument cluster provides a modern and customizable interface, allowing you to access vital information conveniently and enhance your driving experience.
Yes, you can switch between different units, such as miles per hour (mph) and kilometers per hour (km/h), depending on your preference.
It enhances safety by displaying essential information directly in the driver’s line of sight, reducing the need to take your eyes off the road.
Yes, it can display information from smartphone apps when connected through Apple CarPlay or Android Auto.
In most cases, the instrument cluster does not require manual calibration.
Useful Link
View Full PDF: Mazda CX-5 2020 User Manual
2024 MAZDA CX-50 Specs, Price, Features, Mileage (Brochure)
2020 Mazda CX-5 Fuses and Fuse Box | Replacing a blown fuse