Mazda 3 Hatchback 2023 Emergency User Manual

Introduction

In an emergency, having a dependable and capable vehicle on your side is critical. Mazda recognizes the importance of being prepared for any unforeseen circumstances, which is why the Mazda 3 Hatchback 2023 Emergency Edition was introduced. This exceptional vehicle combines the Mazda 3 Hatchback’s renowned performance and style with advanced safety features and enhancements designed to keep you safe and confident in emergency situations. Mazda has always prioritized safety, and the Emergency Edition takes it to a whole new level. The Mazda 3 Hatchback Emergency Edition also includes enhanced durability and reliability features, making it ideal for emergency situations. With a strong chassis and reinforced body structure, this vehicle provides excellent protection in the event of an accident or collision.

In summary, the Mazda 3 Hatchback 2023 Emergency Edition combines the Mazda 3 Hatchback’s dynamic performance and sleek design with advanced safety features and emergency enhancements. With its emphasis on safety, versatility, and preparedness, this vehicle sets a new standard for emergency-ready vehicles, giving you the confidence and reassurance you need in the face of unforeseen circumstances.

Parking in an Emergency

The hazard warning lights should always be used when you stop on or near a roadway in an emergency.

The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

Depress the hazard warning flasher and all the turn signals will flash. The hazard warning indicator lights in the instrument cluster flash simultaneously.

NOTE

• The turn signals do not work when the hazard warning lights are on.
  Check local regulations about the use of hazard warning lights while the vehicle is being towed to verify that it is not in violation of the law.

Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.

4–Door

1. Tiedown eyelet*
2. Spare tire hold-down bolt
3.  Jack lever
4. Flat tire hold-down bolt*
5. Jack
6. Lug wrench
7. Spare tire

5–Door
Type A

1. Tiedown eyelet*
2. Flat tire hold-down bolt*
3. Jack lever
4. Jack
5. Spare tire hold-down bolt
6. Spare tire
7. Lug wrench

Type B

1.  Tiedown eyelet*
2. Spare tire hold-down bolt
3. Flat tire hold-down bolt
4. Jack lever
5. Jack
6. Spare tire
7. Lug wrench

Jack
To remove the jack

4–Door

1. Remove the trunk mat.
   
2. Remove the cover.
   
3. Turn the wing bolt and jack screw counterclockwise.

1. Wing bolt
2. jack screw

5–Door

1. Remove the luggage mat.
   
2. Remove the jack.

To secure the jack
4–Door

1. Insert the wing bolt into the jack with the jack screw pointing to the front and turn the wing bolt clockwise to temporarily tighten it.
2. Turn the jack screw clockwise.
   • Wing bolt
   • jack screw
   • Turn the wing bolt  Always keep the jack clean completely to secure the jack.

NOTE
If the jack is not completely secured, it could rattle while driving. Make sure the jack screw is sufficiently tightened.

5–Door
Perform the removal procedure in reverse.

Maintenance

• Always keep the jack clean.
• Make sure the moving parts are kept free from dirt or rust.
• Make sure the screw thread is adequately lubricated.

Spare Tire
Your Mazda has a temporary spare tire. The temporary spare tire is lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods. Temporary spare tires should NEVER be used for long drives or extended periods.

WARNING
Do not install the temporary spare tire on the front wheels (driving wheels): Driving with the temporary spare tire on one of the front driving wheels is dangerous. Handling will be affected. You could lose control of the vehicle, especially on ice or snow bound roads, and have an accident. Move a regular tire to the front wheel and install the temporary spare tire to the rear.

CAUTION

• When using the temporary spare tire, driving stability may decrease compared to when using only the conventional tire. Drive carefully.
  To avoid damage to the temporary spare tire or to the vehicle, observe the following precautions:
  Do not exceed 80 km/h (50 mph).

   

  • Avoid driving over obstacles. Also, do not drive through an automatic car wash. This tire’s diameter is smaller than a conventional tire, so the ground clearance is reduced.
  • Do not use a tire chain on this tire because it will not fit properly.
  • Do not use your temporary spare tire on any other vehicle, it has been designed only for your Mazda.
  • Use only one temporary spare tire on your vehicle at the same time.

To remove the spare tire
4–Door

1. Remove the trunk mat.
   
2. Turn the spare tire hold-down bolt counterclockwise and remove the spare tire.

1. Spare tire hold-down bolt

NOTE
If the spare tire hold-down bolt cannot be loosened, hold the edge of the tire and turn it counterclockwise until the spare tire hold-down bolt rotates.

5–Door

1. Remove the luage mat.
   
2.  (Vehicles with sub-woofer) Uncouple the sub-woofer connector.
   NOTE
   Extra strength may be required to uncouple the connector. Be sure to squeeze the tab firmly.
3. (Vehicles with sub-woofer)
   Turn the spare tire hold-down bolt counterclockwise and remove the sub-woofer and the spare tire.
   

(Vehicles without sub-woofer) Turn the spare tire hold-down bolt counterclockwise and remove the spare tire.

Spare tire hold-down bolt
NOTE
If the spare tire hold-down bolt cannot be loosened, hold the edge of the tire and turn it counterclockwise until the spare tire hold-down bolt rotates.

To secure the spare tire
Store the spare tire in the reverse order of removal. After storing, verify that the spare tire is stored securely.

Changing a Flat Tire

Changing a Flat Tire

NOTE
If the following occurs while driving, it could indicate a flat tire.

• Steering becomes difficult.
  The vehicle begins to vibrate excessively.
  The vehicle pulls in one direction.

If you have a flat tire, drive slowly to a level spot that is well off the road and out of the way of traffic to change the tire.
Stopping in traffic or on the shoulder of a busy road is dangerous.

WARNING
Be sure to follow the directions for changing a tire:
Changing a tire is dangerous if not done properly. The vehicle can slip off the jack and seriously injure someone. No person should place any portion of their body under a vehicle that is supported by a jack.

Never allow anyone inside a vehicle supported by a jack:
Allowing someone to remain in a vehicle supported by a jack is dangerous. The occupant could cause the vehicle to fall resulting in serious injury.

NOTE
Make sure the jack is well lubricated before using it.

1. Park on a hard, level surface off the right-of-way and firmly set the parking brake.
2. Put a vehicle with an automatic transmission in Park (P), a manual transmission in Reverse (R) or 1, and turn off the engine.
3. Turn on the hazard warning flasher.
4. Have passengers get out of the vehicle and away from the vehicle and traffic.
5. Remove any luggage, the jack, tools, and spare tire .
6. Block the wheel diagonally opposite the flat tire. When blocking a wheel, place a tire block both in front and behind the tire.

NOTE
When blocking a tire, use rocks or wood blocks of sufficient size if possible to hold the tire in place.

Removing a Flat Tire
WARNING
When jacking up a vehicle, always shift the shift lever to 1st or R position (manual transmission vehicle) or shift the selector lever to P position (automatic transmission vehicle), apply the parking brake, and place wheel blocks in the position diagonally opposed to the jack: Changing a flat tire without using wheel blocks is dangerous because the vehicle may move and fall off the jack even with the shift lever in 1st or R position, or the selector lever is in P position, which could result in an accident.

If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the jack lever.

NOTE
Force the end of the jack lever firmly between wheel and cover, or removal will be difficult.
CAUTION
Align the notch on the wheel cover with the valve stem when installing it.

1. 1. Notch
   2. Tire valve
      Damage could occur during installation if the wheel cover is not properly aligned.
2. Loosen the lug nuts by turning them counterclockwise one turn each, but do not remove any lug nuts until the tire has been raised off the ground.
   NOTE
   If your Mazda is equipped with the optional antitheft wheel lug nuts, a special key must be used to unlock the locking lug nut for each wheel.
3. Place the jack on the ground.
4. Turn the jack screw in the direction shown in the figure and adjust the jack head so that it is close to the jack-up position.
5. Place the jack under the jack-up position closest to the tire being changed with the jack head squarely under the jack-up point.
   

    

   1. Jacking position
6.  Place the jack under the jack-up position closest to the tire being changed with the jack head squarely under the jack-up point.
   1. Jack head
7. Continue raising the jack head gradually by rotating the screw with your hand until the jack head is inserted into the jack-up position.
8. Tire blocks
   1. Jacking position
      WARNING
      Use only the front and rear jacking positions recommended in this manual:
      Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone. Use only the front and rear jacking positions recommended in this manual.
      Do not jack up the vehicle in a position other than the designated jack-up position or place any objects on or under the jack: Jacking up the vehicle in a position other than the designated jack-up position or placing objects on or under the jack is dangerous as it could deform the vehicle body or the vehicle could fall off the jack resulting in an accident.
      Use only the jack provided with your Mazda:
      Using a jack that is not designed for your Mazda is dangerous. The vehicle could slip off the jack and seriously injure someone.
      Never place objects under the jack:
      Jacking the vehicle with an object under the jack is dangerous. The jack could slip and someone could be seriously injured by the jack or the falling vehicle.
      NOTE
      When raising the jack head into the jacking position and aligning the groove in the jack head with the rail under the vehicle body, the top of the jack head contacts the vehicle’s underbody without the rail contacting the bottom of the groove.
9. Insert the jack lever and attach the lug wrench to tire jack.
   
10. Turn the jack handle clockwise and raise the vehicle high enough so that the spare tire can be installed. Before removing the lug nuts, make sure your Mazda is firmly in position and that it cannot slip or move.

WARNING
Do not jack up the vehicle higher than is necessary:
Jacking up the vehicle higher than is necessary is dangerous as it could destabilize the vehicle resulting in an accident.
Do not start the engine or shake the vehicle while it is jacked up: Starting the engine or shaking the vehicle while it is jacked up is dangerous as it could cause the vehicle to fall off the jack resulting in an accident.
Never go under the vehicle while it is jacked up:
Going under the vehicle while it is jacked up is dangerous as it could result in death or serious injury if the vehicle were to fall off the jack.

1. Remove the lug nuts by turning them counterclockwise; then remove the wheel and center cap.

Locking Lug Nuts
If your Mazda is equipped with the optional antitheft wheel lug nuts, a special key must be used to unlock the locking lug nut for each wheel. The key is stored in the glove compartment, center console storage, storage box, or trunk. Register the key and lug nuts with the lock manufacturer by filling out the registration card and mailing it in using the accompanying envelope. If the key is lost, consult an Authorized Mazda Dealer or use the lock manufacturer’s order form to order a new key.

Antitheft wheel lug nuts cannot be installed on a steel wheel spare tire. When installing a temporary spare tire, use one of the original lug nuts in place of the locking lug nut. The original lug nuts are stored inside your Mazda.

1. Antitheft lug nut
2. Special key

To remove an antitheft lug nut

1. Obtain the special key for the antitheft lug nut.
2. Place the special key on top of the antitheft lug nut, and be sure to hold the key square to it. If you hold the key at an angle, you may damage both key and nut. Do not use a power impact wrench.
3. Place the lug wrench on top of the key and apply pressure. Turn the wrench counterclockwise.

To install the antitheft lug nut

1. Place the special key on top of the nut, and be sure to hold the key square to it. If you hold the key at an angle, you may damage both key and nut. Do not use a power impact wrench.
2. Place the lug wrench on top of the special key, apply pressure, and turn it clockwise.

Mounting the Spare Tire

1. 1. Remove dirt and grime from the mounting surfaces of the wheel and hub, including the hub bolts, with a cloth.
   WARNING
   Make sure the mounting surfaces of the wheel, hub and lug nuts are clean before changing or replacing tires:
   When changing or replacing a tire, not removing dirt and grime from the mounting surfaces of the wheel, hub and hub bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident.
2. Mount the spare tire.
3. Install the lug nuts with the beveled edge inward; tighten them by hand.
   WARNING
   Do not apply oil or grease to lug nuts and bolts and do not tighten the lug nuts beyond the recommended tightening torque: Applying oil or grease to lug nuts and bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident. In addition, lug nuts and bolts could be damaged if tightened more than necessary.
4. Turn the jack handle counterclockwise using the lug wrench and lower the vehicle.
5. Use the lug wrench to tighten the nuts in the order shown.
   
6. If you are unsure of how tight the nuts should be, have them inspected at an Authorized Mazda Dealer.

WARNING
Always securely and correctly tighten the lug nuts:
Improperly or loosely tightened lug nuts are dangerous. The wheel could wobble or come off. This could result in loss of vehicle control and cause a serious accident.

Be sure to reinstall the same nuts you removed or replace them with metric nuts of the same configuration:
Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous. On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident.

1. (Aluminum wheel equipped vehicle)
   Remove the centre cap by tapping it from the backside of the wheel using the lug wrench.
   Store the damaged tire in the trunk (4-door) or luggage compartment (5-door).
   
2. Secure the damaged tire to the vehicle using the following method.

(Vehicles with flat tire hold-down bolt (excluding vehicles with sub-woofer for 5-door))

1. Spread apart the tabs on the spare tire hold-down bolt that was removed when removing the spare tire and remove the bolt for securing the spare tire.
   
   
   1. Tabs
   2. Bolt for securing spare tire
   3. Spare tire hold-down bolt
2.  Remove the bolt for securing the flat tire from its stored position and install it in place of the removed spare tire hold-down bolt
   1. Bolt for securing the flat tire
   2. Spare tire hold-down bolt
      NOTE
      The longer bolt is used as the bolt for securing the flat tire, and the shorter one is used as the bolt for securing the spare tire. When installing a bolt, check the bolt’s length.
3. Secure the damaged tire to the vehicle using the flat tire hold-down bolt.

(Vehicles with flat tire hold-down bolt and with sub-woofer for 5-door))

1. Remove the bolt for securing the flat tire from its stored position.
   
2. Secure the damaged tire to the vehicle using the flat tire hold-down bolt.
   
   
   1. Flat tire hold-down bolt
   2. Sub-woofer

(Vehicles without flat tire hold-down bolt)

1.  Secure the damaged tire to the vehicle using the spare tire hold-down bolt removed when removing the spare tire.
   
   
2. Place the trunk mat (4-door) or luggage mat (5-door) on the damaged tire.
3. Remove the tire blocks and store the tools and jack.
4. Check the inflation pressure.
5. Have the flat tire repaired or replaced as soon as possible.
6. After repairing or replacing the flat tire, install the wheel cover
   (vehicles with steel wheels) or center cap (vehicles with aluminum wheels) using the following procedure.

(Wheel cover)

1. Align the notch on the wheel cover with the tire valve of the wheel and install the wheel cover to the wheel.
   1. Notch
   2. Tire valve

CAUTION
Always align the notch on the wheel cover with the tire valve of the wheel. Otherwise, it could cause damage to the wheel cover and the tire valve.

(Center cap)

1. Align the center cap with the center hole of the wheel and install the center cap to the wheel.

WARNING
Do not drive with any tires that have incorrect air pressure:
Driving on tires with incorrect air pressure is dangerous. Tires with incorrect pressure could affect handling and result in an accident. When you check the regular tires’ air pressure, check the spare tire, too.

NOTE
To prevent the jack and tool from rattling, store them properly.

Jump-Starting

Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work.

WARNING

Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions carefully before using the battery or inspecting it.

Keep flames and sparks away from open battery cells and do not allow metal tools to contact the positive (+) or negative (–) terminal of the battery when working near a battery. Do not allow the positive (+) terminal to contact the vehicle body:

1. Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. Keep all flames including cigarettes and sparks away from open battery cells.
2. Keep all flames and sparks away from open battery cells because hydrogen gas is produced from open battery cells while charging the battery or adding battery fluid:
   Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. Keep all flames including cigarettes and sparks away from open battery cells.
3. Do not jump-start a frozen battery or one with a low fluid level:
   Jump-starting a frozen battery or one with a low fluid level is dangerous. It may rupture or explode, causing serious injury.

Battery Runs Out

Connect the negative cable to a good ground point away from the battery:
Connecting the end of the second jumper cable to the negative (–) terminal of the discharged battery is dangerous. A spark could cause the gas around the battery to explode and injure someone.

Route the jumper cables away from parts that will be moving:
Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous. The cable could get caught when the engine starts and cause serious injury.

CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in series or a 24 V motor generator set).

NOTE
Do not use vehicles with M Hybrid as a booster vehicle.

1. Move the booster vehicle so that its battery is as close as possible to your vehicle’s battery.
2. Make sure that the power such as for the headlights and air conditioner is turned off.
3. Remove the battery cover.
   
4. Turn off the booster vehicle’s engine and connect the jumper cables in the following order.
   Make sure that the jumper cables are securely connected so that they do not disconnect due to engine vibrations.
   1st lead
   Positive (+) terminal on the discharged battery
   Positive (+) terminal on booster vehicle’s battery
   2nd lead
   Negative (-) terminal on booster vehicle’s battery
   Location shown in the figure (do not connect to the negative (-) terminal of the battery)
   
5. Start the booster vehicle’s engine and rev the engine.
6. Start the engine of your vehicle. Run the engines for about 3 minutes to temporarily charge the battery of your vehicle.
7. Disconnect the jumper cables in the reverse order of their connection.
8. Install the battery cover.
9. Have your vehicle inspected by an Authorized Mazda Dealer as soon as possible.

Starting a Flooded Engine

If the engine fails to start, it may be flooded (excessive fuel in the engine).

Follow this procedure:

1. If the engine does not start within 5 seconds on the first try, wait 10 seconds and try again.
2. Make sure the parking brake is on.
3. Depress the accelerator all the way and hold it there.
4. Depress the clutch pedal (manual transmission) or the brake pedal (automatic transmission), then press the push button start. If the engine starts, release the accelerator immediately because the engine will suddenly rev up.
5. If the engine fails to start, crank it without depressing the accelerator.

If the engine still does not start using the previous procedure, have your vehicle inspected by an Authorized Mazda Dealer.

Push-Starting

Do not push-start your Mazda.

WARNING
Never tow a vehicle to start it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the 2 vehicles to collide. The occupants could be injured.

CAUTION
Do not push-start a vehicle that has a manual transmission. It can damage the emission control system.

NOTE
You cannot start a vehicle with an automatic transmission by pushing it.

Overheating

If the engine coolant temperature gauge indicates overheating and the high engine coolant temperature warning indication is displayed, the vehicle loses power or you hear a loud knocking or pinging noise, the engine is probably too hot.

WARNING
Pull over to a safe location, then switch the ignition off and make sure the fan is not running before attempting to work near the cooling fan:
Working near the cooling fan when it is running is dangerous. The fan could continue running indefinitely even if the engine has stopped and the engine compartment temperature is high. You could be hit by the fan and seriously injured.

Do not remove either cooling system cap when the engine and radiator are hot:
When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury.

Open the hood ONLY after steam is no longer escaping from the engine:
Steam from an overheated engine is dangerous. The escaping steam could seriously burn you. If the engine coolant temperature gauge indicates overheating and the high engine coolant temperature warning indication is displayed:

1. Drive safely to the side of the road and park off the right-of-way.
2. Put a vehicle with an automatic transmission in park (P), a manual transmission in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is escaping from the engine compartment.
   If steam is coming from the engine compartment:
   Do not go near the front of the vehicle. Stop the engine. Wait until the steam dissipates, then open the hood and start the engine.
   If neither coolant nor steam is escaping:
   Open the hood and idle the engine until it cools.
   CAUTION
   If the cooling fan does not operate while the engine is running, the engine temperature will increase. Stop the engine and call an Authorized Mazda Dealer.
6. Make sure the cooling fan is operating, then turn off the engine after the temperature has decreased.
7. When cool, check the coolant level. If it is low, look for coolant leaks from the radiator and hoses.

If you find a leak or other damage, or if the coolant is still leaking:
Stop the engine and call an Authorized Mazda Dealer.

SKYACTIV-G 2.0 and SKYACTIV-G 2.5

1. Cooling system cap
2. Cooling fan
3. Coolant reservoir

SKYACTIV-G 2.5T 

1. Coolant reservoir
2. Cooling fan
3. Cooling system cap

If you find no problems, the engine is cool, and no leaks are obvious: Carefully add coolant as required.

CAUTION
If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made. Consult an Authorized Mazda Dealer.

Towing Description

Towing Description
We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service.
Proper lifting and towing are necessary to prevent damage to the vehicle. Particularly when towing an AWD vehicle, where all the wheels are connected to the drive train, proper transporting of the vehicle is absolutely essential to avoid damaging the drive system. Government and local laws must be followed.

Wheel dollies
A towed FWD vehicle should have its drive wheels (front wheels) off the ground. If excessive damage or other conditions prevent this, use wheel dollies.
When towing a FWD vehicle with the rear wheels on the ground, release the parking brake.
Refer to Electric
A towed AWD vehicle must have all its wheels off the ground.

WARNING
Always tow an AWD vehicle with all four wheels off the ground:
Towing an AWD vehicle with either the front or rear wheels on the ground is dangerous as the drive train could be damaged, or the vehicle could trail away from the tow truck and cause an accident. If the drive train has been damaged, transport the vehicle on a flatbed truck.

CAUTION

• Do not tow the vehicle pointed backward with driving wheels on the ground. This may cause internal damage to the transmission.
  Do not tow with sling-type equipment. This could damage your vehicle. Use wheel-lift or flatbed equipment.
  
• If the parking brake cannot be released when towing the vehicle, transport the vehicle with all front and rear wheels raised off the ground as shown in the figure. If the vehicle is towed without raising the wheels off the ground, the brake system could be damaged.
• 
•  

1. Wheel dollies

Tiedown Hooks
CAUTION
Do not use the front and rear tiedown eyelets for towing the vehicle.
They have been designed only for securing the vehicle to a transport vessel during shipping.
Using the eyelets for any other purpose could result in the vehicle being damaged.

1. Remove the tiedown eyelet and the lug wrench from the luggage compartment.
   Wrap a flathead screwdriver or similar tool with a soft cloth to prevent damage to a painted bumper, and open the cap located on the front or rear bumper.
   Front
   (4–Door)
   (5–Door)
   ………………………….
   Rear
   CAUTION
   Do not use excessive force as it may damage the cap or scratch the painted bumper surface.
   NOTE
   Remove the cap completely and store it so as not to lose it.
2. Securely install the tiedown eyelet using the lug wrench. Front
   (4–Door)
   
3. Lug wrench
4. Tiedown eyelet

1. Lug wrench
2. Tiedown eyelet

Rear
(4–Door)

1. Lug wrench
2. Tiedown eyelet

(5–Door)

1. Lug wrench
2. Tiedown eyelet

Hook the tying rope to the tiedown eyelet

CAUTION
If the tiedown eyelet is not securely tightened, it may loosen or disengage from the bumper when tying the vehicle. Make sure that the tiedown eyelet is securely tightened to the bumper.

If a Warning Light Turns On or Flashes

If any warning light turns on/flashes, take appropriate action for each light. There is no problem if the light turns off, however, if the light does not turn off or turns on/flashes again, consult an Authorized Mazda Dealer. The details for some warnings can be viewed on the center display or multi-information display in the instrument cluster.

Center display

1. Select “Information” on the home screen.
2. Select “Vehicle Status Monitor”.
3. Select the applicable warning to view the warning details.

NOTE
You can also display the currently occurring warning by sliding the commander knob to the left while on the home screen of the center display.

Multi-information display

1. Press the INFO switch on the steering switch to display the warning indication screen.

Brake System Warning Indication/Warning Light

This warning has the following functions:

Warning light inspection
For an operation check, make sure that the light turns on when the ignition is switched on, and turns off a few seconds later or when the engine is started.

When the light turns on
If the brake system warning light remains illuminated the brake fluid may be low or there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.

WARNING
Do not drive with the brake system warning light illuminated. Contact an Authorized Mazda Dealer to have the brakes inspected as soon as possible: Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that the parking brake is fully released, have the brakes inspected immediately?

CAUTION

1. In addition, the effectiveness of the braking may diminish so you may need to depress the brake pedal more strongly than normal to stop the vehicle.
2. (With M Hybrid)
   When starting the engine, the brake system warning light may turn on and the warning indication may be displayed. In this case, park the vehicle in a safe location and release the brake pedal.
   If the brake system warning light/warning indication does not turn off even after parking the vehicle, have the vehicle inspected by an Authorized Mazda Dealer.

Electronic Brake Force Distribution System Warning

If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may illuminate the brake system warning light and the ABS warning light simultaneously. The problem is likely to be the electronic brake force distribution system.

WARNING
Do not drive with both the brake system warning light and ABS warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible.

Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.
When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.

Charging System Warning Indication/Warning Light

If the warning light illuminates while driving, it indicates a malfunction of the alternator or of the charging system.
Drive to the side of the road and park off the right-of-way. Consult an Authorized Mazda Dealer.

CAUTION
Do not continue driving when the charging system warning light is illuminated because the engine could stop unexpectedly.

Engine Oil Warning Indication/Warning Light

This warning light indicates low engine oil pressure.

CAUTION
Do not run the engine if the oil pressure is low. Otherwise, it could result in extensive engine damage.

If the light illuminates or the warning indication is displayed while driving:

1. Drive to the side of the road and park off the right-of-way on level ground.
2. Turn off the engine and wait 5 minutes for the oil to drain back into the oil pan.
3. Inspect the engine oil level (page 6-18). If it’s low, add the appropriate amount of engine oil while being careful not to overfill.
   CAUTION
   Do not run the engine if the oil level is low. Otherwise, it could result in extensive engine damage.
4. Start the engine and check the warning light.

If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to an Authorized Mazda Dealer.

High Engine Coolant Temperature Warning Indication

Displays if the engine coolant temperature has increased excessively.

“Elevated Engine Coolant Temp. Drive Slowly” displayed
Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.

“Excessive Engine Coolant Temp. Stop the Vehicle in a Safe Location” displayed
This indicates the possibility of overheating. Park the vehicle in a safe place immediately and stop the engine.

CAUTION
Do not drive the vehicle with the high engine coolant temperature warning light illuminated. Otherwise, it could result in damage to the engine.

Power Steering Malfunction Indication/Indicator Light

The message is displayed if the electric power steering has a malfunction. If the message is displayed, stop the vehicle in a safe place and do not operate the steering wheel. There is no problem if the indication turns off when the engine is restarted after some time has passed. If the indication displays even after the engine is restarted, contact an Authorized Mazda Dealer if the message is displayed continuously.

NOTE

1. If the message is displayed, the power steering will not operate normally. In this case, the steering wheel can still be operated, however, the operation may feel heavy compared to normal, or the steering wheel could vibrate when turning.
2. Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving extremely slowly will cause the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate a problem. If this occurs, park the vehicle safely and wait several minutes for the system to return to normal.

ABS Warning Indication/Warning Light

If the ABS warning light stays on while you’re driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS. Should this happen, consult an Authorized Mazda Dealer as soon as possible.

NOTE

1. When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light may illuminate. If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction. Recharge the battery.
2. The brake assist system does not operate while the ABS warning light is illuminated.

Master Warning Indication

The indication displays if the system has a malfunction.
Check the reason for the indication displaying on the center display or multi-information display.

Brake Control System Warning Indication/Warning Light

The warning light illuminates when the system has a malfunction. Have your vehicle inspected at an Authorized Mazda Dealer.

Electric Parking Brake (EPB) Indication/Indicator Light

This warning has the following functions:

Parking brake warning/Indicator light inspection
The light illuminates when the parking brake is applied with the ignition switched to START or ON. It turns off when the parking brake is released.

When the light is flashing
The light flashes if the Electric Parking Brake (EPB) has a malfunction. If the light remains flashing even if the Electric Parking Brake (EPB) switch is operated, consult an Authorized Mazda Dealer as soon as possible.

Brake Override Warning Indication

This message is displayed when the accelerator pedal and brake pedal are depressed at the same time while driving.
Release the accelerator pedal and depress the brake pedal.

Check Engine Indication/Light

If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light is illuminated and consult an Authorized Mazda Dealer.
The check engine light may illuminate in the following cases:

1. The engine’s electrical system has a problem.
2. The emission control system has a problem.
3. The fuel-filler cap is missing or not tightened securely.
4. The fuel tank level is very low or approaching empty.

If the check engine light remains on, or it flashes continuously, does not drive at high speeds and consult an Authorized Mazda Dealer as soon as possible.

WARNING
If the check engine light turns on, do not disconnect the battery cables. If the battery cables are disconnected and then reconnected, the engine could be damaged and catch on fire.

i-stop Warning Indication/Warning Light (Amber)

The light turns on/flashes continuously if the system has a problem.
Have the vehicle inspected by an Authorized Mazda Dealer.

Automatic Transmission Warning Indication/Warning Light

The indication/light illuminates when the transmission has a problem.

CAUTION
If the automatic transmission warning indication/light illuminates, the transmission has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transmission. Consult an Authorized Mazda Dealer as soon as possible.

AWD Warning Indication/Warning Light

AWD Malfunction. Front-wheel drive Only. Have the Vehicle Inspected” is displayed/When the light is turned on
The indication is displayed/the light turns on under the following conditions. The system may have malfunctioned. Have the vehicle checked at an Authorized Mazda Dealer.

1. When there is a malfunction in the AWD system.

“Excessive AWD System Load. Drive Slowly Until the Warning Light Turns Off. Vehicle Now in Front Wheel Drive” is displayed/When the light is flashing
The indication is displayed/the light flashes under the following conditions. Park the vehicle in a safe place and check that the warning indication light turns off/ the warning light stops flashing, and then drive the vehicle. Contact an Authorized Mazda Dealer if the indication is continuously displayed.

1. When the differential oil temperature is excessively high.
2. When there is a large difference between the front and rear wheel rotation, such as when trying to remove the vehicle from mud.

“Mismatched Tire Diameters. Vehicle Now in Front Wheel Drive” is displayed/When the light is turned on
The indication is displayed/the light turns on under the following conditions. Inspect the tire sizes or tire pressures on all 4 wheels. Contact an Authorized Mazda Dealer if the indication remains on or the warning light remains illuminated.

1. When any of the tire diameters is different.
2. When any of the tire pressure is incorrect.

TCS/DSC Indication/Indicator Light (Turns on)

If the light stays on, the TCS, DSC or the brake assist system may have malfunction and they may not operate correctly. Take your vehicle to an Authorized Mazda Dealer.

Air Bag/Seat Belt Pretensioner System Warning Indication/Warning Light

A system malfunction is indicated if the warning light constantly flashes, constantly illuminates or does not illuminate at all when the ignition is switched ON. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.

WARNING
Never tamper with the air bag/pre tensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:
Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.

Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light (Flashing)

If there is a problem with the TPMS or the voltage of a tire pressure sensor decreases, the TPMS warning light flashes, and a message is displayed on the multi-information display. Have your vehicle inspected by an Authorized Mazda Dealer.

WARNING

Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle’s speed.

Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.

KEY Warning Indication/Warning Light (Red)

“Keyless Entry System Malfunction. Have the Vehicle Inspected” is displayed
This message is displayed if the advanced keyless entry & push button start system has a problem.
Contact an Authorized Mazda Dealer.

CAUTION
If the message is indicated, or the push button start indicator light (amber) flashes, the engine may not start. If the engine cannot be started, try starting it using the emergency operation for starting the engine, and have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.

“Key Not Detected” is Displayed

1. If the presence of the key cannot be detected (dead battery, battery malfunction, no key), it is displayed when the driver attempts to start the engine (push button start operation, brake pedal depression).
2. Displayed when it is determined that a key that was in the vehicle has been removed from the vehicle. (Key taken out warning. Other than IG-OFF).

Security Indicator Light

If the security indicator light flashes continuously while you are driving, do not shut off the engine. Go to an Authorized Mazda Dealer and have it checked. If the engine is shut off while the indicator light is flashing, you will not be able to restart it. Make sure the key is within the operational range for signal transmission. Switch the ignition off, and then restart the engine. If the engine does not start after 3 or more tries, contact an Authorized Mazda Dealer.

NOTE
Because the electronic codes are reset when the immobilizer system is repaired, the keys are needed. Make sure to bring all the keys to an Authorized Mazda Dealer so that they can be programmed.

High Beam Control System (HBC) Warning Indication/Warning Light (Amber)

The light remains turned on if there is a problem with the system. Have your vehicle inspected at an Authorized Mazda Dealer.

i-ACTIVSENSE Warning Indication/Warning Light

The indication displays if the system has a malfunction.
Check the reason for the indication displaying on the center display or multi-information display.

Exterior Light Warning Indication/Warning Light

This light illuminates if there is a malfunction in the exterior lights (except license plate lights). Have your vehicle inspected by an Authorized Mazda Dealer.

CAUTION
Do not drive the vehicle while an exterior light has malfunctioned. Poor visibility, and not being able to signal braking and turns may cause an accident. In addition, if the vehicle is driven with the lights not turned on, it may conflict with laws and regulations due to poor maintenance.

Low Fuel Warning Indication/Warning Light

The warning indication/warning light displays/turns on when the ignition is switched ON and the remaining fuel is about 9 L (2.3 US gal, 1.9 Imp gal) or the remaining distance to empty is 50 km (31 miles) or shorter. The warning light flashes when the vehicle continues to be driven with the warning indication/warning light displayed/turned on and the remaining fuel in the tank is near empty.

NOTE
The light illumination timing may vary because fuel inside the fuel tank moves around according to the driving conditions and the vehicle posture.

Action to be taken
Add fuel. If the light is flashing, refuel as soon as possible.

Check Fuel Cap Warning Indication/Warning Light

If the check fuel cap warning light illuminates while driving, the fuel-filler cap may not be installed properly.

Action to be taken
Stop the engine and reinstall the fuel-filler cap.

Engine Oil Level Warning Indication/Warning Light

This warning light indicates that the engine oil level is around the MIN mark.

CAUTION
Do not continue to drive the vehicle with the engine oil level warning indication/warning light displayed/turned on. If the vehicle continues to be driven with an insufficient amount of engine oil, it could cause damage to the engine.

Action to be taken
Add 1 L (0.26 US gal, 0.22 Imp gal) of engine oil.

Seat Belt Warning Indication/Warning Light (Front seat)

The seat belt wrning light turns on if the driver or front passenger’s seat is occupied and the seat belt is not fastened with the ignition switched ON. If the driver or front passenger’s seat belt is unfastened (only when the front passenger’s seat is occupied) and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, the warning light flashes for a certain period. After a short time, the warning light stops flashing, but remains illuminated.

NOTE

1. The warning light flashes for about 6 seconds if the driver or front passenger’s seat is not fastened when the ignition is switched ON.(Except Mexico)
2. Placing heavy items on the front passenger’s seat may cause the front passenger’s seat belt warning function to operate depending on the weight of the item.
3. To allow the front passenger occupant classification sensor to function properly, do not place and sit on an additional seat cushion on the front passenger’s seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
4. If a small child is seated on the front passenger’s seat, the warning light may not operate.

Action to be taken
Fasten the seat belts.

Seat Belt Warning Light (Rear seat)(Red)

If the rear seat belts are not fastened while the ignition is switched ON , the driver and the passenger are alerted by the warning light.
The warning light operates even if there is no passenger on the rear seat.

NOTE
If a rear seat belt is not fastened by a certain period of time after the engine has been started, the warning light turns off.

Action to be taken
Fasten the seat belts.

Low Washer Fluid Level Warning Indication/Warning Light

This warning light indicates that little washer fluid remains.

Action to be taken
Add washer fluid.

Door-Ajar/Trunk lid-Ajar/Liftgate-Ajar Warning Indication/Warning Light

The light turns on if any door/trunk lid/liftgate is not closed securely.

Action to be taken
Close the door/trunk lid/liftgate securely.

Tire Pressure Monitoring System (TPMS) Warning Indication/Warning Light (Turns on)

If a tire pressure decreases below the specified air pressure, the TPMS warning light turns on.
At the same time, a message and the tire pressure of each tire are displayed on the multi-information display alternately. In addition, the tire (s) with low air pressure is displayed in yellow.

WARNING

Do not drive the vehicle at high speeds if the TPMS warning light turns on or flashes:
Driving the vehicle at high speeds while the TPMS warning light is turned on or flashing is dangerous because the brake performance and the steering wheel operability will be reduced. If the vehicle is driven at high speeds or the brakes are suddenly applied, it could lead to an accident. Gradually apply the brakes to lower the vehicle’s speed.

Do not ignore the TPMS warning light when it is turned on or flashing:
Continuing to drive the vehicle while ignoring the illumination/flashing of the TPMS warning light is dangerous because a tire may burst which could lead to an accident. Take appropriate measures as soon as possible.

NOTE
While the TPMS is learning the tire positions, such as immediately after a tire position has been changed, the tire pressure at the tire position prior to it being changed is displayed until the system completes the learning. For this reason, the tire pressures displayed for the tire positions may be different from the actual tire pressures at the tire positions.

Action to be taken
Adjust the tire pressures to the appropriate pressures.

CAUTION

1. Adjust the tire pressures while the tires are cool. Because the air pressure in the tires fluctuates depending on the temperature, before adjusting the tire pressures, let the vehicle sit for an hour or drive it only within a 1.6 km (1 mile) distance. If the tire pressures are adjusted while the tires are warm, the tire pressures may decrease below the specified air pressure after cooling down which could turn on the warning light. In addition, because the air pressure in the tires decreases when the ambient temperature is low, if the ambient temperature increases, an illuminated TPMS warning light may turn off. Under any circumstances, always adjust the tire pressures while the tires are cool.
2. After adjusting the tire pressures, the TPMS warning light turns off. If the TPMS warning light does not turn off, drive the vehicle at a speed of about 25 km (16 mph) or faster for 3 minutes or longer and make sure the warning light turns off.

If the TPMS warning light remains on even after adjusting the tire pressures, one of the tires may have a puncture.

KEY Indicator Light (Green)(Flashing)

“Low Key Fob Battery. Replace Battery” is displayed/When the light is flashing
When the key battery is low, the indication is displayed when the ignition is switched OFF.

Action to be taken
Replace the key battery.

Message Indicated on Multi-information Display

Message Indicated on Multi-information Display
If there is a notification from the vehicle, a message is displayed on the multi-information display. Check the information and take the necessary action.

Multi-information display
If the warning light turns on/flashes simultaneously or a symbol is indicated on the display, check the information regarding the warning light or symbol.

Display*1*2*3	Content	Action to be taken
Depress Brake Pedal. Brake Hold Disabled	This message is indicated when there is a problem with the brake related system while the vehicle is being held in a stop position by the AUTOHOLD function.	Depress the brake pedal. Cancel the AUTOHOLD function and have your vehicle inspected at an Authorized Mazda Dealer.
Steep Slope. Continue Pressing Brake Pedal to Hold Stopped Position	This message indicates the possibility of the vehicle not being held in the stopped position by the AUTOHOLD function, such as on steep slopes.	Depress and hold your foot on the brake pedal.
Depress Brake Pedal and Operate Switch to Release Elec. Parking Brake	This message is indicated when the Electric Parking Brake (EPB) switch is operated without depressing the brake pedal.	Operate the Electric Parking Brake (EPB) switch while depressing the brake pedal.
Depress Brake Pedal and Operate Switch to Release	This message is indicated when the cancel operation is done without de- pressing the brake pedal while the vehicle is being held in the stopped position by the AUTOHOLD function.	Cancel the AUTOHOLD function stop hold control while depressing the brake pedal.

Display*1*2*3	Content	Action to be taken
Mazda Radar Cruise Control Canceled. Drive Safely	This message is indicated when the Mazda Radar Cruise Control (MRCC), Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function), and the Traffic Jam Assist (TJA) have been canceled other than by the driver.	Have your vehicle inspected by an Authorized Mazda Dealer.
Distance & Speed Alert Operation Canceled Drive Safely	This message is indicated when the Distance & Speed Alert (DSA) have been canceled other than by the driver.	Have your vehicle inspected by an Authorized Mazda Dealer.
Cruise Control Operation Canceled. Drive Safely	This message is indicated when the Cruise Control have been canceled other than by the driver.	Have your vehicle inspected by an Authorized Mazda Dealer.
Emergency Braking Activated. Depress Brake Pedal to Hold Stop	This message is indicated after the Smart Brake Support (SBS) brakes operate and when the Smart Brake Sup- port (SBS) is canceled.	Depress the brake pedal.
Touch Key Fob to Push Button Start Switch	This message is indicated when the key battery is weak (battery dead or damaged key).	Touch the key against push button start to start the engine.   Refer to Engine Start Function When Key Battery is Dead
Depress Brake Pedal to Start Vehicle	This message is indicated when the push button start is pressed without depressing the brake pedal.	When starting the engine, press the push button start with the brake pedal depressed.
Check Gear Selector Lever Position	This message is indicated when the selector lever is shifted to the P or R position while driving.	Check the selector lever position.
Close Door and Fasten Seat Belt	This message is indicated when AU- TOHOLD is about to operate and a door is opened or a seat belt is unfastened.	When the AUTOHOLD is turned on, close the doors and fasten seat belts.
Wiper Blades Must Be on Windshield Before Operating	This message is indicated when the ignition is switched ON with the wiper arms at the service positions.	Return the wiper arms to the initial positions.
Windshield Wiper Range of Motion Reduced. Re- move Obstruction(s)	This message is indicated when there is snow or dirt accumulation on the windshield and the wiper operation range is narrowed.	Remove foreign matter from the windshield.

 

Display*1*2*3	Content	Action to be taken
Vehicle Not Switched Off	This message is indicated when the driver’s door is opened without switching the ignition OFF.	Switch the ignition OFF before leaving the vehicle.
Gear Selector Lever Not in Park	Displays when the push button start is pressed while the selector lever is in a position other than P, and the ignition is switched to ACC.	Shift the selector lever to the P position and then switch the ignition OFF.
Excessive Transmission Temperature. Drive Slowly	This message is indicated when the internal temperature of the automatic transmission is high.	Drive slowly to reduce load on the automatic transmission.
Excessive Transmission Temp. Stop Vehicle in a Safe Location	This message is indicated when the automatic transmission fluid temperature is abnormally high.	Park the vehicle in a safe place immediately and contact an Authorized Mazda Dealer.
Battery Saving Mode. Drive Vehicle to Charge Battery	This message is indicated when the power consumption exceeds a certain amount such as by repeatedly opening/closing the doors or the lift- gate when the ignition is switched OFF.   Some of the functions are restricted to reduce power consumption.	Drive the vehicle for 5 minutes or longer to charge the battery. The warning message will clear just after starting the engine.
Shift Into Park Before Exiting Vehicle	This message is indicated when the driver’s door is opened with the selector lever in a position other than the P position.	Close the driver’s door or shift the selector lever to the P position.

1. A pop-up is displayed when a warning occurs.
2. One screen displays four rows. If the entire message cannot be displayed on the screen, it switches to another screen.
3. The displayed content may differ from the actual vehicle.

Warning Sound is Activated

Lights-On Reminder
The lights-on reminder is operable when the time setting*1 of the auto headlight off function is off. If the ignition is switched OFF with the exterior lights turned on and the driver’s door is opened, a sound is activated. Operate the headlight switch to turn off the exterior lights.

If the light switch is left on, the auto headlight off function automatically turns off the lights about 30 seconds after switching the ignition off. The time setting can be changed.
Refer to the Settings section in the Mazda Connect Owner’s Manual.

NOTE

1. When the ignition is switched to ACC, the “Ignition Not Switched OFF (STOP) Warning Beep” overrides the lights-on reminder.
2. A personalized function is available to change the sound volume for the lights-on reminder.
   Refer to the Settings section in the Mazda Connect Owner’s Manual.

Seat Belt Warning Beep
Front seat

Except Mexico
If the driver’s seat belt is not fastened when the ignition is switched ON, a beep sound will be heard for about 6 seconds. If the driver or the front passenger’s seat belt is not fastened and if the vehicle is driven at about 20 km/h (12 mph) or faster, or about 10 km/h (6 mph) or faster for a continuous 30 seconds, with the seat belt unfastened, a sound is activated continuously for a certain period. Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).

NOTE

1. To allow the front passenger occupant classification sensor to function properly, do not place and sit on an additional seat cushion on the front passenger’s seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
2. If a small child is seated on the front passenger’s seat, the warning beep may not operate.

Mexico
If the vehicle speed exceeds about 20 km/h (12 mph) with the driver or front passenger’s seat belt unfastened, a warning beep sounds continuously. If the seat belt remains unfastened, the beep sound stops once and then continues for about 90 seconds. The beep stops after the driver or front passenger’s seat belt is fastened. Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).

NOTE

1. Placing heavy items on the front passenger’s seat may cause the front passenger’s seat belt warning function to operate depending on the weight of the item.
2. To allow the front passenger seat weight sensor to function properly, do not place and sit on an additional seat cushion on the front passenger’s seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.
3. If a small child is seated on the front passenger’s seat, the warning beep may not operate.

Rear seat
The warning beep only sounds if a seat belt is unfastened after being fastened.

Ignition Not Switched Off (STOP) Warning Beep
If the driver’s door is opened with the ignition switched to ACC, a beep will be heard continuously in the cabin to notify the driver that the ignition has not been switched OFF (STOP). Under this condition, the keyless entry system will not operate, the vehicle cannot be locked, and the battery voltage will be depleted.

Key Removed from Vehicle Warning Beep

Vehicles with advanced keyless function
If the key is taken out of the vehicle while the ignition is switched to ACC or ON, and all the doors are closed, a sound is activated 6 times outside of the vehicle and a sound is activated 1 time in the vehicle.

Vehicles without advanced keyless function
If the key is taken out of the vehicle while the ignition is switched to ACC or ON, and all the doors are closed, a sound is activated 1 time in the vehicle.

NOTE
Make sure that you leave the vehicle while carrying the key, or switch the ignition OFF.

Touch Sensor Inoperable Warning Beep (With the advanced keyless function)
A warning beep is activated to notify the driver that the doors are not locked when all of the following conditions are met:

1. The ignition is switched OFF.
2. All the doors and liftgate are not fully closed.
3. The lock is operated 3 times within 5 seconds.

Check the ignition and whether the doors and liftgate are open or closed, and then operate the lock again.

Liftgate Door-lock Switch Inoperable Warning Beep*
When the door-lock switch on the liftgate is pressed under any of the following conditions, a warning sound is activated.

1. The ignition is switched to a position other than OFF.
2. Any door is open.

Make sure that none of the above conditions are present, and then press the door-lock switch again.

Key Left-in-luggage Compartment/Trunk Warning Beep (With the advanced keyless function)
If the key is left in the luggage compartment/trunk with all the doors locked and the liftgate/trunk lid closed, a beep will be heard outside for about 10 seconds to notify the driver that the key is in the luggage compartment/trunk. In this case, take out the key by pressing the electric liftgate/trunk lid opener and opening the liftgate/trunk lid. The key taken out of the luggage compartment/trunk may not operate because its functions have been temporarily stopped. To restore the key’s functions, perform the applicable procedure.

Key Left-in-vehicle Warning Beep (With the advanced keyless function)
If all the doors and luggage compartment/trunk are locked using another key while the key is left in the cabin, the beep which sounds outside of the vehicle will be heard for about 10 seconds to notify the driver that the key is in the cabin. In this case, take out the key by opening the door. A key taken out of the vehicle using this method may not operate because its functions have been temporarily stopped. To restore the key’s functions, perform the applicable procedure.

Low Fuel Warning Beep
When the low fuel warning light flashes, a warning beep is activated once at the same time.

Brake System Warning Beep (With M Hybrid)
A warning beep is activated if a problem with the brake system occurs and the brakes may not work as intended. Decelerate the vehicle while checking the safety of the surrounding area, and park the vehicle in a safe place. After stopping the vehicle, contact an Authorized Mazda Dealer.

Brake Override Warning Beep
A warning beep is activated when the accelerator pedal and brake pedal are depressed at the same time while driving. Only depress the brake pedal.

Shift Position Warning Beep
A sound is activated when the push button start is pressed while the selector lever is in a position other than P, and the ignition is switched to ACC. Check the selector lever position.

Selector Lever Not In P or N Reminder Warning Beep (With M Hybrid)
A warning beep is activated continuously if the driver’s door is opened with the selector lever in a position other than the P or N position when the engine is running. Shift the selector lever to the P or N position, or close the driver’s door.

i-stop Warning Beep
If the driver’s door is opened while engine idling is stopped, the warning sound operates to notify the driver that engine idling is stopped. It stops when the driver’s door is closed.

Electric Parking Brake (EPB) Warning Beep
The warning buzzer is activated under the following conditions:

1. The vehicle is driven with the parking brake applied.
2. The Electric Parking Brake (EPB) switch is pulled while the vehicle is driven.
3. You attempt to start driving the vehicle while the conditions for releasing the Electric Parking Brake (EPB) automatically have not been met.

AUTOHOLD Warning Beep
Warning light flashes/message is displayed and beep sound is activated simultaneously for about 5 seconds when using AUTOHOLD function or when AUTOHOLD switch is operated. Because a problem with AUTOHOLD function has occurred, AUTOHOLD function does not operate even if AUTOHOLD switch is operated.
If the warning light flashes/message is displayed and the beep sound is activated simultaneously, have your vehicle inspected at an Authorized Mazda Dealer.

Vehicle Problem Warning Beep
If any of the following problems occur, a warning beep is activated. Check the information regarding the warning indication in the instrument cluster or on the center display.

1. Automatic transmission problem
2. Increase in automatic transmission internal temperature
3. M Hybrid problem
4. Brake fluid amount decrease
5. Engine oil level sensor problem
6. Electric Parking Brake (EPB) problem
7. Engine hydraulic pressure decrease
8. Engine coolant temperature increase
9. Engine system problem

Blind Spot Monitoring (BSM) System Warning Beep*
The Blind Spot Monitoring (BSM) warning beep operates when the turn signal lever is operated to the side where the Blind Spot Monitoring (BSM) warning light is illuminated.

Front Cross Traffic Alert (FCTA)
Warning Beep
The Front Cross Traffic Alert (FCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the front on the left and right sides of the vehicle.

Rear Cross Traffic Alert (RCTA) Warning Beep
The Rear Cross Traffic Alert (RCTA) warning beep is activated if there is a possibility of collision with a vehicle approaching from the rear on the left and right sides of the vehicle.

Lane Departure Warning Sound
While the system is operating, if the system determines that the vehicle may depart from the lane, it sounds a warning sound.

NOTE
The volume of the Lane Departure Warning System (LDWS) warning sound can be changed.
Refer to the Settings section in the Mazda Connect Owner’s Manual.

Mazda Radar Cruise Control (MRCC) System Warnings
The Mazda Radar Cruise Control (MRCC) system warnings notify the driver of system malfunctions and cautions on use when required. Check based on the beep sound.

Warning beep type	Notification content
	The vehicle speed is  slower than 25 km/h (16 mph) and the Mazda Radar Cruise Control (MRCC) system has been canceled.
The beep sounds 1 time while the Mazda Radar Cruise Control (MRCC) is operating
	The distance between
The beep sounds intermittently while the	your vehicle and the
	vehicle ahead is too
Mazda Radar Cruse	close. Check the safety
Control (MRCC) is operating.	of the surrounding
	area and reduce vehicle speed.

Mazda Radar Cruise Control with Stop and Go function (MRCC with Stop & Go function) System Warnings
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system warnings notify the driver of system malfunctions and cautions on use when required. Check based on the beep sound.

Warning beep type	Notification content
The beep sounds 1	If a malfunction occurs in the system, make sure that the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) has been canceled.
time while the Mazda
Radar Cruise Control
with Stop & Go function (MRCC with Stop
Go function) is operating.
The beep sounds intermittently while the	The distance between
	your vehicle and the
Mazda Radar Cruise	vehicle ahead is too
Control with Stop &	close. Check the safety of the surrounding
Go function (MRCC
with Stop and Go function) is operating.	area and reduce vehicle speed.

Excessive Speed Warning
If the vehicle speed exceeds the speed limit sign displayed in the active driving display/instrument cluster, the area around the speed limit sign flashes in amber and the warning sound is activated at the same time. If the vehicle speed continues to exceed the displayed speed limit sign, the indication stops flashing and remains on.

Collision warning
If there is a possibility of a collision with a vehicle ahead, a warning sound is activated at the same time as the warning indications are displayed in the instrument cluster or active driving display.

Door-ajar Warning Beep
A warning beep is activated if the vehicle is driven with any door or liftgate ajar. Drive the vehicle after closing the doors and liftgate.

Battery Saving Mode Warning Sound
A warning sound is activated when the vehicle goes into battery-saving mode. The warning sound will stop just after starting the engine.

When Liftgate/Trunk Lid Cannot be Opened

When Liftgate/Trunk Lid Cannot be Opened
If the battery is dead, the liftgate/trunk lid cannot be unlocked and opened. In this case, the liftgate/trunk lid can be unlocked by taking care of the dead battery situation.
If the liftgate/trunk lid cannot be unlocked even if the dead battery situation has been resolved, the electrical system may have a malfunction.
In this case, the liftgate/trunk lid can be opened using the following procedure as an emergency measure.

(5–door)

1. Wrap the end of a flathead screwdriver in a cloth and remove the cover on the interior surface of the liftgate using it.
   
2. Turn the lever to the right to unlock the liftgate.

(4–door)

1. Open the cover.
   
2. (With theft-prevention cover) Open the cap.
   
3. (With theft-prevention cover) Turn the screw counterclockwise and remove it.
   
4. (With theft-prevention cover) Remove the theft-prevention cover.
   
5. Move the lever to the left to fold the seatback.
   
6. Move the lever to the left to open the trunk lid.

After performing this emergency measure, have the vehicle inspected at an Authorized Mazda Dealer as soon as possible.

If the Active Driving Display Does Not Operate
If the active driving display does not operate, switch the ignition off and then restart the engine. If the active driving display does not operate even with the engine restarted, have the vehicle inspected at an Authorized Mazda Dealer.

Windshield Wipers Operate at High Speed
The windshield wipers may operate at high speed if there is a problem with the wiper control. If the windshield wipers operate at high speed regardless of the wiper switch operation, have your vehicle inspected by an Authorized Mazda Dealer.

FAQs

Useful Links

View Full User Guide: Mazda 3 Hatchback 2023 User Manual| Auto User Guide
Download Link: Owner’s – Manuals, Guides, Maintenance Schedules | Mazda USA

Related Article

2023 Mazda 3 Hatchback Specs, Price, Features, Mileage (Brochure)

2023 Mazda 3 Specs, Price, Features, Mileage (Brochure)

2023 MAZDA CX-30 Specs, Price, Features, Mileage (Brochure)

2024 MAZDA CX-50 Specs, Price, Features, Mileage (Brochure)