Mazda 3 Sedan 2023 Cruise Control User Manual
Introduction
The Mazda 3 Sedan 2023 has a sophisticated cruise control system that improves the driving experience by providing convenience and comfort on long trips. Cruise control is a popular feature that allows drivers to set and maintain a desired speed without constantly pressing the accelerator pedal. This system is intended to make driving more relaxing, especially on highways and open roads. Drivers can effortlessly maintain a consistent speed with the Mazda 3 Sedan 2023’s cruise control, which is especially useful during long trips. The cruise control system is easily activated by pressing the conveniently located “Cruise” button on the steering wheel. Once activated, the driver can use the “Set” button to set their desired speed, and the vehicle will maintain that speed until manually adjusted or cancelled.
It’s worth noting that, while the Mazda 3 Sedan 2023’s cruise control system is a useful convenience feature, it lacks advanced features like automatic braking and adaptive cruise control. It instead focuses on maintaining a constant speed, giving drivers more control and flexibility on their journeys.
Cruise Control
Cruise Control
With cruise control, you can set and automatically maintain any speed of more than about 30 km/h (19 mph).
WARNING
Do not use the cruise control under the following conditions:
Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.
- Hilly terrain
Steep inclines
Heavy or unsteady traffic
Slippery or winding roads
Similar restrictions that require inconsistent speed
The vehicle speed may exceed the set speed during sudden acceleration or on steep down slopes.
In this case, depress the brake pedal to adjust the vehicle speed.
Cruise Control Switch
- CANCEL switch
- RES switch
- Cruise switch
NOTE
If your Mazda has the following steering switch, your Mazda is equipped with the Mazda Radar Cruise Control (MRCC) system, the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system.
Refer to Mazda Radar Cruise Control (MRCC)
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) on page 4-139. If the Mazda Radar Cruise Control
(MRCC) or Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) is set to inoperable using the personalization feature, the system switches to the cruise control function. In this case, the MRCC functions as the cruise switch. In addition, this personalization feature setting is initialized by switching the ignition OFF, and it turns back on when the ignition is switched ON the next time.
Cruise Standby Indication
(White)/Cruise Set Indication (Green)
Cruise standby Indication (White)
The indication turns on (white) when the cruise control system is activated.
Cruise Set Indication (Green)
The indication turns on (green) when a cruising speed has been set.
Activation/Deactivation
WARNING
Always turn off the cruise control system when it is not in use:
Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.
If the headway control function is disabled using a Mazda Connect setting, the system switches to cruise control.
Activation
To activate the system, press the cruise switch. The cruise standby indication (white) turns on.
Deactivation
To deactivate the system, press the cruise switch again.
The cruise standby indication (white) turns off.
To Set Speed
- Activate the cruise control system by pressing the cruise switch. The cruise standby indication (white) turns on.
- Accelerate to the desired speed, which must be more than 25 km/h (16 mph).
- Adjust the system to the desired vehicle speed using the accelerator pedal. Press the RES switch up (SET+) or down (SET-) to start cruise control. The cruise control indication (green) in the instrument cluster turns on at the same time. Quickly release the switch when the cruise control indication (green) turns on.
NOTE
- If the RES switch is operated up (SET+) or down (SET-) while the vehicle speed is between 25 and 30 km/h (16 to 19 mph), the set speed is set to 30 km/h (19 mph).
The cruise control speed setting cannot be performed under the following conditions:
Any of the doors is opened.
The driver’s seat belt is unfastened.
The brake pedal is depressed. - The parking brake is applied.
- (Automatic transmission)
The selector lever is in the P, N, or R position.
(Manual transmission)
The shift lever is in the neutral position. - On a steep grade, the vehicle may momentarily slow down while ascending or speed up while descending.
- The cruise control will cancel if the vehicle speed decreases below 20 km/h (12 mph) when the cruise control is activated, such as when climbing a steep grade.
The vehicle speed preset using the cruise control is displayed in the instrument cluster and the active driving display (vehicles with active driving display).
Instrument cluster (Basic display)
Instrument cluster (i-ACTIVSENSE display)
Active driving display
Changing the Set Vehicle Speed
Follow either of these procedures
To increase/decrease speed using cruise control switch
When the RES switch is pressed up (SET+), the vehicle accelerates and when the RES switch is pressed down (SET-), it decelerates.
Press and release immediately: 1 km/h (1 mph)
Press and hold: 10 km/h (5 mph)
NOTE
Even after releasing the RES switch, the cruise control accelerates/decelerates continuously until the set speed displayed in the instrument cluster and on the active driving display is reached. If you want to stop accelerating/decelerating, change the set speed or cancel the system (such as by depressing the brake pedal).
To increase speed using accelerator pedal
Depress the accelerator pedal and press the RES switch up (SET+) or down (SET-) at the desired speed. If the switch is not operated, the system returns to the set speed after you release your foot from the accelerator pedal.
NOTE
Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed. Take your foot off the accelerator to return to the set speed.
To Resume Cruising Speed at More Than 30 km/h (19 mph)
If the cruise control system is temporarily canceled (such as by applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RES switch is pressed.
If vehicle speed is below 30 km/h (19 mph), increase the vehicle speed up to 30 km/h (19 mph) or more and press the RES switch.
To Temporarily Cancel
To temporarily cancel the system, use one of these methods:
- Slightly depress the brake pedal.
Press the CANCEL switch. - (Manual transmission) Depress the clutch pedal.
If the RES switch is pressed when the vehicle speed is 30 km/h (19 mph) or higher, the system reverts to the previously set speed.
NOTE
- If any of the following conditions occur, the cruise control system is temporarily canceled.
Even when the brake pedal is slightly depressed.
The DSC is operating.
There is a problem in the system.
Any of the doors is opened.
The driver’s seat belt is unfastened.
The parking brake is applied.
(Automatic transmission)
The selector lever is in the P, N, or R position. - (Manual transmission)
The shift lever is in the neutral position. - When the cruise control system is temporarily canceled by even one of the applicable cancel conditions, the speed cannot be re-set.
- (Automatic transmission)
The cruise control cannot be canceled while driving in manual mode (selector lever shifted from D to M position). Therefore, engine braking will not be applied even if the transmission is shifted down to a lower gear. If deceleration is required, lower the set speed or depress the brake pedal.
To Deactivate
Press the cruise switch again.
FAQs
Cruise control is a feature that enables the driver to set and maintain a constant speed while removing their foot from the accelerator pedal.
Yes, the Mazda 3 Sedan 2023 has a cruise control system.
To use the cruise control, simply press the “Cruise” button on the steering wheel.
Once the cruise control is turned on, you can set the desired speed by pressing the “Set” button on the steering wheel. When you’ve reached your desired speed, simply press the button.
To change the set speed, press the “Res+” button to increase it and the “Set-” button to decrease it. These controls are found on the steering wheel.
Yes, you can disable the cruise control system temporarily by pressing the “Cancel” button on the steering wheel. This will disable the system without completely turning it off.
Simply press the “Resume” button on the steering wheel to return to the previously set speed. The vehicle will return to its previous speed.
No, the Mazda 3 Sedan 2023’s cruise control system does not support automatic braking or adaptive cruise control. It maintains a constant speed but does not respond to traffic.
No, the Mazda 3 Sedan 2023’s cruise control system does not allow you to adjust the following distance. It simply keeps the set speed.
The Mazda 3 Sedan 2023’s cruise control system is designed to operate at speeds greater than 25 mph (40 km/h) up to the vehicle’s top speed.
The cruise control system can be used in hilly or mountainous terrain. However, as the vehicle climbs or descends steep gradients, you may need to manually adjust the set speed.
When you apply the brakes, the cruise control system will disengage. This is a safety feature that keeps the driver in command of the vehicle.