Mazda 3 Sedan 2023 Wipers and Washer User Manual
Introduction
Advanced wiper and washer systems on the Mazda 3 Sedan 2023 are made to offer the best visibility and convenience in a variety of weather conditions. Your driving experience will be safe and enjoyable thanks to these features, which will free up your attention for the task at hand. The Mazda 3 Sedan 2023 has a highly effective and dependable wiper system. It comes with a pair of stylish windscreen wipers that remove rain, snow, or other debris from the windscreen with ease. The wipers are made using premium materials to ensure durability and lifespan and are designed to offer maximum coverage. The wipers effectively sweep across the windscreen while operating quietly and smoothly, giving drivers good sight regardless of the weather.
The Mazda 3 Sedan 2023 has a washer system to improve the performance of the wiper system. In order to distribute washer fluid onto the windscreen, the washer system comprises of fluid reservoirs, pumps, and spray nozzles that are carefully placed. This makes it easier to remove tenacious dirt and grime and ensures that the road ahead can be seen clearly and unhindered. The Mazda 3 Sedan 2023’s washer system was created with ease in mind. It makes it simple to turn on the system whenever necessary by allowing you to manage the washer fluid flow with a straightforward switch or lever. The washer fluid reservoir also provides the volume to hold enough fluid for prolonged use, minimising the need for frequent refills.
Wipers and Washer
Windshield Wipers and Washer
The ignition must be switched ON to use the wipers.
WARNING
Use only windshield washer fluid or plain water in the reservoir:
Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.
Only use windshield washer fluid mixed with anti-freeze protection in freezing weather conditions:
Using windshield washer fluid without anti-freeze protection in freezing weather conditions is dangerous as it could freeze on the windshield and block your vision which could cause an accident. In addition, make sure the windshield is sufficiently warmed using the defroster before spraying the washer fluid.
CAUTION
- When the wipers are not used during freezing temperatures or for a long time, the wiper rubber may adhere to the glass. If the wipers are operated while adhered to the glass, it could damage the wiper rubber and motor.
If the wipers are operated while the glass is dry, the glass could be scratched and the wiper rubber damaged. When the glass is dry, spray washer fluid before operating the wipers. - If the amount of washer fluid spray is insufficient, do not use the washer switch. If the washer switch continues to be operated with no washer fluid being sprayed, it could lead to pump damage.
NOTE
If the windshield wipers are operated under cold weather conditions or during snowfall, they could stop due to accumulated snow on the windshield. If the windshield wipers stop due to accumulated snow on the windshield, park the vehicle in a safe place, turn the wiper switch off, and then remove the accumulated snow. If the wiper switch is turned to another position other than OFF, the wipers will operate. If the wipers do not operate even though the wiper switch is turned to a position other than OFF, consult an Authorized Mazda Dealer as soon as possible.
Windshield Wipers
Turn the wipers on by pressing the lever up or down.
With intermittent wiper
| Switch Posi- tion | Wiper operation |
| MIST | Operation while pulling up lever |
| OFF | Stop |
| INT | Intermittent |
| LO | Low speed |
| HI | High speed |
Variable-speed intermittent wipers
Set the lever to the intermittent position and choose the interval timing by rotating the switch.
Rotate the switch upward (FAST direction) to shorten the interval time of the wiper operation, and rotate the switch downward (SLOW direction) to lengthen it.
- Switch
With auto-wiper control
- Indicator light
| Switch Posi- tion | Wiper operation |
| MIST | Operation while pulling up lever |
| OFF | Stop |
| AUTO*1 | Auto control |
| LO | Low speed |
| HI | High speed |
- When the wiper lever is switched to the AUTO position, the indicator light turns on.
Auto-wiper control*
When the wiper lever is in the AUTO position, the rain sensor senses the amount of rainfall on the windshield and turns the wipers on or off automatically (off―intermittent―low speed―high speed). The sensitivity of the rain sensor can be adjusted by turning the switch on the wiper lever. From the center position (normal), rotate the switch upward (+ direction) for higher sensitivity (faster response) or rotate it downward (- direction) for less sensitivity (slower response).
- Switch
- Higher sensitivity
- Center position
- Less sensitivity
CAUTION
- Do not shade the rain sensor by adhering a sticker or a label on the windshield. Otherwise the rain sensor will not operate correctly.
When the ignition is switched ON and the wiper lever is in the AUTO position, the windshield wipers may operate automatically in the following cases: - The area of the windshield above the rain sensor is touched or wiped with a cloth.
- The windshield or the rain sensor area in the cabin is hit.
When the ignition is switched ON and the wiper lever is in the AUTO position, do not touch the windshield or the windshield wipers Otherwise, the windshield wipers will operate automatically which could catch your fingers or damage the windshield wipers. When removing ice or snow, or cleaning the windshield, always make sure the wiper lever is in the OFF position.
NOTE
- Switching the auto-wiper lever from the OFF to the AUTO position while driving activates the windshield wipers once, after which they operate according to the rainfall amount.
- The auto-wiper control may not operate when the rain sensor temperature is about －10 °C (14 °F) or lower, or about 85 °C (185 °F) or higher.
- If the windshield is coated with water repellent, the rain sensor may not be able to sense the amount of rainfall correctly and the auto-wiper control may not operate properly.
- If dirt or foreign matter (such as ice or matter containing salt water) adheres to the windshield above the rain sensor, or if the windshield is iced, it could cause the wipers to move automatically. However, if the wipers cannot remove this ice, dirt or foreign matter, the auto-wiper control will stop operation. In this case, set the wiper lever to the low speed position or high speed position for manual operation, or remove the ice, dirt or foreign matter by hand to restore the auto-wiper operation.
- If the auto-wiper lever is left in the AUTO position, the wipers could operate automatically from the effect of strong light sources, electromagnetic waves, or infrared light because the rain sensor uses an optical sensor. It is recommended that the auto-wiper lever be switched to the OFF position other than when driving the vehicle under rainy conditions.
- If the headlight switch and the windshield wiper switch are in AUTO, and the wipers are operated at low or high speed by the auto wiper control for several seconds, bad weather conditions are determined and the headlights may be turned on.
The auto-wiper control functions can be turned off. Refer to the Settings section in the Mazda Connect Owner’s Manual.
Windshield Washer
Pull the wiper lever toward you to spray washer fluid and operate the windshield wipers several times. The washer fluid is sprayed only while the windshield wipers move out of their stowed positions to the point where they start reversing back. If the washer does not work, inspect the fluid level (page 6-21). If the fluid level is normal, consult an Authorized Mazda Dealer.
Rear Window Wiper and Washer
Rear Window Wiper and Washer*
The ignition must be switched ON to use the wiper.
Rear Window Wiper
Turn the wiper on by turning the rear wiper/washer switch.
| Switch Position | Wiper operation |
| OFF | Spray washer fluid and operate the rear wiper |
| ON | Normal |
| INT | Intermittent |
| OFF | Stop |
| OFF | Spray washer fluid and operate the rear wiper |
Rear Window Washer
To spray washer fluid, turn the rear wiper/washer switch to either of the position. After the switch is released, the washer will stop.
NOTE
While the windshield washers are operating (from the
time the wiper lever is pulled until the washer fluid stops spraying), the rear window washer does not spray washer fluid even if you operate the switch. If the washer does not work, inspect the fluid level (page 6-21). If the fluid level is normal and the washer still does not work, consult an Authorized Mazda Dealer.
Rear Window Defogger
Rear Window Defogger
The rear window defogger clears fog from the rear window. The ignition must be switched ON to use the defogger. Press the switch to turn on the rear window defogger. The rear window defogger operates for about 15 minutes and then turns off automatically. The indicator light illuminates when the defogger is operating. To turn off the rear window defogger before the 15 minutes has elapsed, press the switch again.
- Indicator light
CAUTION
- Do not use sharp instruments or window cleaners with abrasives to clean the inside of the rear window surface. They may damage the defogger grid inside the window.
NOTE
- This defogger is not designed for melting snow. If there is an accumulation of snow on the rear window, remove it before using the defogger.
- The rear window defogger operation time can be changed from 15 minutes to continuous operation. When the operation time has been switched to continuous operation, by pressing the switch, the rear window defogger will continue to operate until the ignition is switched OFF. Refer to the Settings section in the Mazda Connect Owner’s Manual.
Windshield Wiper Deicer
The thermal filaments at the following positions heat up and facilitate the removal of snow accumulated on the windshield.
The windshield wiper deicer operates in conjunction with the rear window defogger.
To turn on the windshield wiper
deicer, switch the ignition ON and press the rear window defogger switch.
- Indicator light
Mirror Defogger
The mirror defoggers defrost the outside mirrors. The mirror defoggers operate in conjunction with the rear window defogger. To turn on the mirror defoggers, switch the ignition ON and press the rear window defogger switch.
- Indicator light
Horn
To sound the horn, press the 
mark on the steering wheel.
Hazard Warning Flasher
The hazard warning lights should always be used when you stop on or near a roadway in an emergency.
The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Depress the hazard warning flasher and all the turn signals will flash. The hazard warning indicator lights in the instrument cluster flash simultaneously.
NOTE
- The turn signals do not work when the hazard warning lights are on.
- Check local regulations about the use of hazard warning lights while the vehicle is being towed to verify that it is not in violation of the law.
FAQs
The Mazda 3 Sedan 2023 has two wiper blades, one on the driver’s side and one on the passenger side.
The size of the wiper blades varies depending on the trim level and optional features. For the specific wiper blade sizes recommended for your Mazda 3 Sedan, consult the owner’s manual or a Mazda dealer.
Lift the wiper arm away from the windshield, press the small tab or button on the underside of the wiper blade assembly, and slide the blade off the arm. Then, slide the new wiper blade onto the wiper arm until it clicks into place.
Genuine Mazda wiper blades or high-quality aftermarket wiper blades compatible with the Mazda 3 Sedan 2023 are recommended. For the recommended brands and types, speak with a Mazda dealer or consult the owner’s manual.
Wiper blades typically last 6 to 12 months, depending on usage and environmental factors. However, it is critical to inspect the blades on a regular basis for signs of damage or decreased performance and to replace them as needed.
Yes, as long as it is formulated for use in automotive applications, you can use aftermarket windshield washer fluid. It is recommended that you use a washer fluid that meets or exceeds the manufacturer’s specifications.
The Mazda 3 Sedan 2023’s windshield washer fluid reservoir is usually found in the engine bay. To find it, consult the owner’s manual or look for a labeled cap with a windshield symbol.
Open the hood and locate the reservoir to refill the windshield washer fluid. Remove the cap and pour the washer fluid into the reservoir until the desired level is reached. Take care not to overfill.
It is recommended that you use windshield washer fluid designed specifically for automotive use. Look for a fluid that is both effective at cleaning and appropriate for the climate in which you drive.
It’s a good idea to check the windshield washer fluid level on a regular basis, especially before long trips or during seasons when road conditions are likely to necessitate frequent use of the wipers and washer system.
If the wiper blades are worn or damaged, they may skip or leave streaks. , or incorrectly installed. It’s also possible that the windshield is dirty or contaminated itself. To resolve this issue, inspect the wiper blades and thoroughly clean the windshield.
The Mazda 3 Sedan 2023 has an adjustable wiper speed feature. Select the desired wiper speed setting using the wiper control stalk located on the steering column.
You can use the wipers manually even if the automatic wiper feature is disabled. Simply activate the wipers in various speed settings or use the intermittent wipe function by using the wiper control stalk.
Depending on the region and warranty terms, the specific warranty coverage for the wipers and washer system may vary. For accurate information, consult the warranty documentation or contact a Mazda dealer.
If you have problems with your wipers or washer system, such as reduced performance, unusual noises, or complete failure, you should have the system inspected and repaired by a Mazda service center. They can identify the issue and recommend appropriate solutions.
Useful Links
View Full User Guide: 2023 Mazda 3 Sedan User Manual | Auto User Guide
Download Link: Owner’s – Manuals, Guides, Maintenance Schedules | Mazda USA