Mazda CX-9 2021 User Manual

 

The Mazda CX-9 is a midsize SUV that combines style, comfort, and speed. The 2021 Mazda CX-9 continued to amaze with its sleek design, luxurious interior, and fun driving experience.
Mazda’s “Kodo” design language was used to make the 2021 CX-9. This style put an emphasis on flowing lines, a bold front grille, and sculpted body parts. It looked more stylish and expensive than other SUVs in its class, which made it stand out. The design features of the CX-9 gave it a look that was both elegant and sporty.
The 2021 CX-9 usually had a turbocharged 2.5-liter four-cylinder engine under the hood. This engine had a lot of power and torque, which gave it strong movement and a quick response. People liked how the CX-9 delivered power smoothly and how it was easy to drive.

The cabin of 2021 CX-9 was large and comfortable. High-quality products were used, and it was clear that care was taken with every little thing. All of the people in the car had a good time driving and riding because the seats were soft and supportive. The cabin was made to be quiet and comfortable, with less noise from the road and better general comfort.
The CX-9 had Mazda’s easy-to-use entertainment system, which was usually managed by a central screen and a rotary dial. Depending on the trim level, this system let you use tools like Bluetooth connectivity, smartphone integration, and navigation if it was available. The CX-9 was designed to make it easy to stay connected and get to fun and information.
The 2021 CX-9 had improved safety features and driver-assistance technologies to make it safer. These could include things like blind-spot monitoring, rear cross-traffic warning, adaptive cruise control, lane-keeping assist, and automatic emergency braking. Mazda puts safety first and wants all of its cars to have as many safety features as possible.

How to Use This Manual

We want to help you get the most driving pleasure from your vehicle. Your owner’s manual, when read from cover to cover, can do that in many ways.
Illustrations complement the words of the manual to best explain how to enjoy your Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions. The symbol below in this manual means “Do not do this” or “Do not let this happen”.

Index: A good place to start is the Index, an alphabetical listing of all information in your manual. You’ll find several WARNINGs, CAUTIONs, and NOTEs in the manual.

WARNING:
A WARNING indicates a situation in which serious injury or death could result if the warning is ignored.

CAUTION:
A CAUTION indicates a situation in which bodily injury or damage to your vehicle, or both, could result if the caution is ignored.

NOTE
A NOTE provides information and sometimes suggests how to make better use of your vehicle.
The following symbol, located on some parts of the vehicle, indicates that this manual contains information related to the part.
Please refer to the manual for a detailed explanation.

The adjustments for the driving position recommended by Mazda are done using the following procedures.

1. Moving the steering wheel and seat to their default positions.
2. Adjusting the seatback angle.
3. Adjusting the seat position forward and back.
4. Adjusting the seat height.
5. Adjusting the steering wheel position.
6. Adjusting the head restraint position.

Seat Slide (Manual Seat)
To move a seat forward or backward, raise the lever and slide the seat to the desired position and release the lever.
Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward.
(Power Seat)
To slide the seat, move the slide lifter switch on the outside of the seat to the front or back and hold it. Release the switch at the desired position.

Height Adjustment
(Manual Seat)
To adjust the seat height, move the lever up or down.
(Power Seat)
To adjust the seat height, move the slide lifter switch up or down.

Height Adjustment for Front Edge of Seat Bottom
(Power Seat)*
To adjust the front height of the seat bottom, raise or lower the front of the slide lifter switch.

Seat Recline
(Manual Seat)
To change the seatback angle, lean forward slightly while raising the lever. Then lean back to the desired position and release the lever.
Make sure the lever returns to its original position and the seatback is locked in place by attempting to push it forward and backward.
(Power Seat)
To change the seatback angle, press the front or rear side of the reclining switch. Release the switch at the desired position.

Lumbar Support Adjustment*
(Manual Seat)
To increase the seat firmness, move the lever downward. Move the lever upward to decrease firmness.
(Power Seat)
To increase the seat firmness, press and hold the front part of the switch to the desired position, then release it.
Press the rear part of the switch to decrease firmness.

Never adjust the steering wheel while the vehicle is moving:
Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident.

After adjusting the steering wheel position, make sure it is securely locked by trying to move it up and down:
Driving with the steering wheel not securely locked in position is dangerous. If the steering wheel moves unexpectedly while driving, you could lose control of the steering resulting in an accident.
Lower the lever, move the steering wheel to the lowest position, and then push it down and all the way back.

How to move a driver’s seat to its default position

1. Slide the seat all the way back.
2. Lower the seat to its lowest height.
3. Sit squarely in the seat and rest your back against the seatback.

Driving Position Memory
The desired driving position can be called up after programming the position.
The following driving positions can be programmed.

1. Driver’s seat position (seat slide, height adjustment, front edge of seat bottom, seat recline)
   Refer to Adjusting the Driver’s Seat on pages 2-5.
2. Active driving display (display position, brightness level, display information)

CAUTION:
Do not place fingers or hands around the bottom of the seat while the seat memory function is operating. The seat moves automatically while the seat memory function is operating and fingers or hands could get pinched and injured. A driving position can be programmed or operated using the buttons on the side of the seat or the key.

NOTE:

1. Lumbar support adjustment cannot be programmed.
2. A driving position can be programmed to the buttons on the side of the seat and the key in use for driving the vehicle.
3. If the vehicle has been serviced and the battery cables disconnected, the programmed seat positions will have been erased. Re-program the seat positions.

Programming

1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P position.
3. Start the engine.
   Adjust the seat and the active driving display to the desired driving position.
4. Press the SET button on the seat until a beep sound is heard 1 time.
5. Perform one of the following settings within 5 seconds of completing step 5 above:
   1. Programming using a button on the side of the seat
      Press the button you want to program, either button 1 or 2, until a beep sound is heard 1 time.
   2. Programming using the key
      Press the key button until a beep sound is heard 1 time.

NOTE
If a beep sound is heard 3 times, the operation is canceled.

To move the driving position to a programmed position
(Using a button on the side of the seat)

1. Make sure the parking brake is on.
2. Make sure the selector lever is in the P position.
3. Start the engine.
4. Press the programming button for the driving position you want to call up (button 1 or 2).
5. A beep sound is heard when the driving position adjustment is completed.

Reference Links

Download link: https://www.mazdausa.com/owners/how-to-use-my-mazda