2022 McLaren Super Series 720S Instrument Cluster Guide
In the realm of high-performance sports cars, the 2022 McLaren Super Series 720S Instrument Cluster represents the pinnacle of cutting-edge technology and driver-centric design. As the flagship of McLaren’s Super Series, the 720S combines breathtaking performance with an exquisite interior, and the instrument cluster exemplifies this coupling of form and function. The 2022 McLaren Super Series 720S Instrument Cluster exemplifies McLaren’s dedication to innovation, allowing the driver to access vital information with simplicity and accuracy. This instrument cluster not only enhances your driving experience, but also exemplifies McLaren’s design and engineering prowess. With its contemporary aesthetics and cutting-edge technology, the instrument cluster in the 720S establishes a new standard for sports car dashboards, making it a key component in a vehicle that continues to redefine what is possible in the realm of high-performance automotive excellence.
Instruments
Overview
The Folding Driver Display is activated when the ignition is switched on, see Switching on the ignition.
WARNING: No messages will appear on the Folding Driver Display if there is a fault with the screen or vehicle electrics. Contact your McLaren retailer immediately. Use of the vehicle in these circumstances can be dangerous.
Tachometer
The tachometer display appears in the center of the Folding Driver Display when in Non-Active or Comfort powertrain and handling modes. The red number on the display indicates the engine’s maximum RPM.
When Sport or Track powertrain or handling modes are selected, the tachometer style will change to suit the selected mode. See Display window, page 3.18.
NOTE: The maximum RPM is dynamic and will be reduced under certain conditions, for example, if the engine oil is below normal operating temperature or if neutral gear is selected.
NOTE: Do not operate the engine at or near its maximum speed for a significant length of time. The fuel supply is cut off to protect the engine when the maximum RPM is reached.
Shift lights
When the Track powertrain or handling mode is selected, shift lights will be displayed. The shift lights are arranged in three blocks; a green block, red block and a blue block. Each block illuminates as the engine RPM increases. Accelerating the engine speed beyond the point that the blue block is illuminated is not conducive to rapid acceleration.
Speedometer
The speedometer is situated centrally on the Folding Driver Display when in Non-Active or Comfort powertrain and handling modes.
When Sport or Track powertrain or handling modes are selected, the speedometer style will change to suit the selected mode. See Display window
NOTE: The speedometer changes from mph to km/h when the units are changed from miles to kilometers, see Distance & Speed unit.
NOTE: The vehicle speed will constantly display ‘0’ if there is a system communication fault. A warning message will appear on the Folding Driver Display to inform you of the fault. Adapt your driving style while this fault exists, you are responsible for the vehicle’s speed at all times. Contact your McLaren retailer.
Folding Driver Display
Overview
Warnings appear in a pop-up window on the Folding Driver Display.
The stored messages can be viewed at any time when the ignition is on, see Messages.
WARNING: Operating and browsing menus whilst the vehicle is in motion could make you unable to observe road and traffic conditions and could cause an accident.
WARNING: Do not ignore warning messages, failure to take appropriate action may result in personal injury or damage to the vehicle.
Driver Display deployment
The Folding Driver Display can be set to automatically fold down to Slim Display Mode in certain powertrain or handling modes, remain in Slim Display Mode or to remain in Full Display Mode at all times. See Driver Display deployment mode.
The Folding Driver Display deployment mode can be manually changed, using the button located on the dashboard.
If the Folding Driver Display is in Full Display Mode, press the dashboard switch to fold it down to Slim Display Mode. If the Folding Driver Display is in Slim Display Mode, press the dashboard switch to open it to Full Display Mode.
Clock
The clock displays the current time. For more details see Regional settings.
Temperature
WARNING: Even if the temperature displayed is above freezing point, the road surface may still be icy. You should always adapt your driving style and speed to suit the weather conditions.
Temperature is the current outside temperature. There is a short delay before a change in outside temperature is displayed.
When the outside air temperature falls below 3°C (37°F), the frost warning message will be displayed and the temperature reading will change colour after the message has been displayed.
When the outside temperature falls below 0°C (32°F), the ice warning will be displayed.
Menu
Navigation through the menu structure is achieved using the control stalk mounted on the left of the steering column.
The following categories are available:
- Trip info
- Vehicle info,
- Phone,
- Media,
- Navigation,
Navigate the menu
- Move the control stalk up or down (SCROLL
+ or -) to highlight your choice. - Pull the stalk towards you (FORWARD) to enter your selection.
- Then select the topic of interest from the list, move the control stalk up or down
(SCROLL + or -) to highlight your choice. - Pull the stalk towards you (FORWARD) to move through to the next menu in the structure.
- At the end of each structure, there will be a display of information or a screen where a setting can be changed or information viewed.
- When the function required is selected or a setting is made, pull the stalk towards you (FORWARD) to confirm.
Trip info
The Folding Driver Display can display the following trip data:
- Trip (since start)
Trip (long term)
In order to reset the trip data to zero, select the required option from the menu and pull the stalk towards you (FORWARD) to confirm.
Trip (since start)
Displays distance, time, average fuel consumption and average speed for the current journey.
The information will also reset to zero when the engine is switched off for approximately 2 hours.
Displays distance, time, average fuel consumption and average speed since the last trip reset.
Odometer
The odometer is shown on each trip screen and displays the total distance the vehicle has travelled.
Vehicle info
Overview
The following choices can be made from the Vehicle info screen.
- Message
Tyre
Oil status
Battery
Servicing
Vehicle identification
Message
If no error messages have been logged, the display will confirm this.
If any errors have been logged, the screen will display error messages with arrows to scroll through the messages.
Tyre
This shows the pressures and temperatures of each of the 4 tyres. If the figures appear in white, no action is required. If they appear as amber or red text, have the tyres inspected and pressures rectified as soon as possible.
Inspect the tyre(s) for any possible causes of reduced pressure or increased temperature.
Oil status
Displays a gauge showing the level of oil, together with the oil temperature.
To check the engine oil level, see Checking the engine oil.
Battery
Displays a gauge showing the battery charge status.
To charge the battery, see Charging the battery.
To see how long the vehicle can be parked without the engine running or charging the battery, see Parking days.
Servicing
At approximately 30 days or 625 miles (1,000 km) before a service is due, the above display appears.
The message will then appear every time the ignition is switched on, with the time/distance figures reducing. Once the service has been carried out, the display will be reset by your McLaren retailer.
If a service becomes overdue, the display will show the distance by which it is overdue.
Vehicle identification
Displays the vehicle identification number (VIN).
Phone
Pull the stalk towards you (FORWARD) to access further options.
The following options are available:
Redial
Favourites
History
For more information on pairing and setting up a phone, see Phone..
Media
Details of the track or radio station currently playing will be displayed.
Pull the stalk towards you (FORWARD) to access further options.
The following options are available:
- Play
Pause
Next
Previous
For more information on accessing media from different sources, see Media.
NOTE: The available options within the media menu may depend on source which is currently playing.
Navigation
The current navigation turn-by-turn guidance will be displayed on the Folding Driver Display if route guidance has been started using the Central Infotainment Touchscreen.
For more information on setting a route and using the navigation feature, see Navigation.
The turn-by-turn display provides the following information:
- Next turn direction and distance
- Total distance to destination remaining
- Total time to destination remaining
NOTE: If no destination has been set using the Central Infotainment Touchscreen, only the compass and current road name will be displayed.
If available, the speed limit for the current road will be displayed on the Folding Driver Display.
NOTE: The speed limit is for guidance only, always observe local speed limit information as there may be temporary or new speed restrictions in place.
Messages
The Folding Driver Display may show messages that refer you to the Owner’s Handbook.
The icon displayed with the message indicates the severity.
Information that does not require action to be taken.
Information that requires action to be taken.
Low risk fault information.
High risk fault information.
NOTE: Some messages may have different icons indicating that there is a fault with a specific function.
Some messages advise you to consult the Owner’s Handbook. The table below indicates what you should dowhenone of these messages is displayed.
WARNING: Do not ignore warning messages, failure to take appropriate action may result in injury or damage to the vehicle.
FAQs
The instrument cluster features an 8-inch, high-resolution display for displaying vital information.
Yes, using the car’s interface settings, you can customize the information displayed, including performance metrics and navigation data.
The instrument cluster is controlled by switches and knobs on the steering wheel and center console.
The instrument cluster provides real time information on vehicle speed, RPM, gear selection, and other vital vehicle statistics such as tire pressure, engine temperature, and more.
Yes, it is compatible with smartphone integration systems such as Apple CarPlay and Android Auto, allowing access to your preferred applications.
Yes, you can select from a variety of themes and layouts.
The cluster is designed to be extremely visible and automatically adjusts its brightness to account for varying lighting conditions.
So that you can keep your eyes on the road, the HUD displays essential driving data such as speed, navigation directions, and performance metrics.
Yes, the instrument cluster provides access to the infotainment system, allowing you to alter music, settings, and more without having to remove your hands from the steering wheel.
Yes, there is a night mode that adjusts the display to minimize glare when traveling at night.
The instrument cluster displays information regarding driver assistance systems, including adaptive cruise control and lane-keeping assist.
Yes, the 720S is equipped with a track mode that optimizes the instrument cluster for race-specific data and telemetry.
Yes, McLaren offers software updates for the instrument cluster to improve and introduce new features.
Yes, the language parameters can be modified to accommodate the preferences of different regions and drivers.
Yes, the user manual can be accessed directly from the instrument cluster for reference and troubleshooting.
Link Useful
View Full PDF: 2022 McLaren Super Series 720S | Auto User Guide
2022 McLaren Super Series 720S Cruise Control (SCC) Operation