2023 McLaren ARTURA Warning Lights and Symbols Guide
The 2023 McLaren Artura is not only the pinnacle of automotive engineering, but also a symbology masterpiece, with its variety of warning lights and symbols guiding you through the complex dance of current vehicle diagnostics. From the moment you turn on its hybrid heart, a symphony of lights floods the dashboard, each symbol representing a beacon of communication between man and machine. These symbols, which range from familiar to intriguing, convey critical information about the Artura’s health, performance, and operational condition, assuring a smooth voyage for the driver and cutting-edge technology. Understanding these signals is similar to understanding a language specific to the Artura, where knowledge allows drivers to successfully navigate any road, whether smooth asphalt or difficult terrain, in search of automotive perfection.
2023 McLaren ARTURA Specs, Price, Features, Mileage and Review
Instruments and warning lights
Warning lights can be divided into different categories, according to the color that they illuminate.
-
RED or AMBER warning light – indicates that a fault has been detected. A fault indicated by a RED light is more important than one displayed in AMBER.
-
BLUE or GREEN notification light – indicates that a system or feature is switched on and operating.
|
|
Tire pressure monitoring system (TPMS) |
|
|
Seat belts |
|
|
Rear fog lamp |
|
|
Supplementary restraint system (SRS) |
|
|
Electronic stability control (ESC) |
|
|
Lane Departure Warning |
|
|
Engine warning light |
|
|
Anti-lock braking system (ABS) |
|
|
Brake pedal |
|
|
Low oil pressure warning light. If this illuminates, stop the vehicle as soon as safety permits and contact your McLaren retailer immediately. |
|
|
Engine coolant hot warning light. If this illuminates, stop the vehicle as soon as safety permits and contact your McLaren retailer immediately. |
|
|
No charge warning light. If this illuminates, stop the vehicle as soon as safety permits and contact your McLaren retailer immediately. |
|
|
Electronic stability control system failure warning light. If this illuminates, adapt your driving style while the fault exists. Contact your McLaren retailer. |
|
|
Low fuel level warning light. If this illuminates, only 10% fuel is remaining, refuel your vehicle at the soonest opportunity. See Filling with fuel |
|
|
Low fuel level warning light. If this illuminates, only 5% fuel is remaining, refuel your vehicle at the soonest opportunity. See Filling with fuel |
|
|
Generic failure warning light. A message will be shown on the Driver Display when this is illuminated, stop the vehicle as soon as safety permits and contact your McLaren retailer immediately. |
|
|
Generic failure caution light. A message will be shown on the Driver Display when this is illuminated, stop the vehicle as soon as safety permits and contact your McLaren retailer immediately. |
Notification lights
|
|
Turn signals, |
|
|
High beam headlamps |
|
|
Auto High Beam Assist, |
|
|
Light switch |
|
|
Auto High Beam Assist |
|
|
Light switch |
|
|
Turn signals |
Driver Display overview
The Driver Display is dynamic and the content displayed can be configured to display different information and features. The left-hand carousel menu is configured using the left-hand control stalk, see Carousel menu.
The Driver Display has various layouts designed to support the selected handling and powertrain modes
Non-essential content can be hidden, by pushing and holding the left-hand control stalk away from you to activate Stealth mode.
For full details about the Driver Display see Instruments, page 3.01.
Seamless shift gearbox gear positions
The gearbox operates in either automatic or manual mode. Automatic mode is selected unless the driver chooses manual mode
Parking brake
NOTE: When parking on steep downhill slopes, turn the front wheels towards the kerb. When parking on steep uphill slopes, turn the front wheels away from the kerb.
Parking brake status
If the parking brake applied status light is flashing, the parking brake has failed to engage/disengage. To resolve, engage/disengage the parking brake again. See Parking brake operation
Parking brake operation
To engage the parking brake, pull the switch outwards, the red parking brake applied status light on the Driver Display illuminates.
NOTE: The parking brake on your vehicle is electronic and only a light application of the switch is required to engage or disengage the parking brake.
To disengage the parking brake, keep the brake pedal depressed and push the parking brake switch inwards, the red parking brake applied status light on the Driver Display extinguishes.
WARNING: If the parking brake is manually released, the vehicle may start to move.
NOTE: If the parking brake is not manually released, it will automatically release as the vehicle is driven off forward, or in reverse as long as the following conditions are met:
- Driver’s door is closed
- Driver’s seat belt is buckled
NOTE: If the parking brake is not manually applied it will automatically apply when the engine is switched off.
NOTE: It is only possible to disengage the parking brake with the ignition on. The parking brake can be applied in all ignition states, including vehicle asleep.
NOTE: In the event of total footbrake failure, the parking brake can be applied when the vehicle is moving to slow the vehicle.
NOTE: If the parking brake cannot be disengaged due to electrical failure or battery discharge, see How to recover the vehicle with a discharged 12V or HV battery, page 6.17 and contact your McLaren retailer.
NOTE: If the parking brake cannot be engaged due to electrical failure or battery discharge, use the supplied chock to ensure the vehicle remains stationary. How to recover the vehicle with a discharged 12V or HV battery.
WARNING: Do not keep any objects in the driver’s footwell. Ensure that floor mats or carpets are properly secured and do not obstruct the pedals.
If objects become trapped between the pedals, you may not be able to brake or accelerate, and this could lead to an accident.
WARNING: Do not rest your foot on the brake pedal while traveling as this may overheat the brakes, reduce their efficiency and cause excessive wear.
WARNING: If the brake warning light illuminates while the vehicle is in motion, stop the vehicle as soon as safety permits and contact your McLaren retailer immediately.
Brake discs and pads
WARNING: New brake pads require a period of bedding in. For the first 625 miles (1,000 km), avoid situations where heavy braking is required.
Brake disc and pad wear depends on the driving style and driving conditions.
Brake warning lightThe brake warning light will illuminate when the ignition is switched on as a system test. If the brake warning light illuminates at any other time, a fault is indicated. Stop the vehicle as soon as safety permits and contact your McLaren retailer immediately.
Starting/stopping the vehicle
WARNING: Never run the engine when the vehicle is in an enclosed space. Exhaust fumes contain poisonous carbon monoxide. Breathing exhaust fumes could lead to unconsciousness and death.
NOTE: Do not depress the accelerator pedal when starting the engine.
Starting the vehicle
- Ensure that the key fob is in the vehicle.
- Depress the brake pedal, press and release the START/STOP button and the vehicle will start.
Starting in Electric mode
The vehicle defaults to Electric powertrain and Comfort handling modes on startup.
Press the brake pedal and push the START/STOP button. The READY indicator on the Driver Display shows that electric power is available.
-
To purge the fuel vapor after refueling.
-
To warm the catalysts to support efficient use of the engine.
-
To charge the High Voltage (HV) battery when electric range is depleted.
If the engine starts to warm the catalysts, CONDITIONING ENGINE is shown on the Driver Display.
If the engine starts because electric range is depleted, the engine will provide drive to the wheels once the catalysts are warm. However, torque will be limited to that provided by the eMotor and the HV battery level will be sustained. A message displays recommending that you change powertrain mode.
Changing to an alternative powertrain mode will provide access to the vehicle’s combined hybrid power and will provide charge to the HV battery.
Starting in Hybrid mode
Depending on various conditions, such as throttle input, High Voltage (HV) battery state of charge, catalyst temperature, etc, the vehicle will operate in one of the following Hybrid modes:
|
Series Hybrid |
The vehicle is driven by the eMotor with engine power being used for electricity generation. |
|
Parallel Hybrid |
The vehicle is driven by both the engine and the eMotor. |
To start the vehicle in a hybrid mode:
-
Press the START/STOP button without pressing the brake pedal.
-
Select the desired powertrain mode using the powertrain control.
-
Press the brake pedal and push the START/STOP button.NOTE: The engine will start and warm the catalysts. During this period:
-
Drive is provided by the eMotor only. The engine does not provide power or respond to throttle input.
-
The transmission remains in automatic.
-
The tachometer remains at idle.
-
During this state, the progress bar displays on the Powertrain mode indicator and CONDITIONING ENGINE is shown on the Driver Display.
To start the vehicle with full torque and throttle response immediately available, the engine must still be warm from previous use.
Stopping the vehicle
-
Depress the brake pedal.
-
Select neutral.
- Press the START/STOP button. The engine stops, the vehicle enters Awake mode The immobiliser is activated.
NOTE: The parking brake will apply automatically when the engine is stopped. Automatic application can be overridden by holding the parking brake switch in the off position whilst opening the driver’s door.
Driving away
WARNING: Never turn the vehicle off while driving, there will be no assistance for the steering or the foot brake. You will need more effort to steer and brake and could lose control of the vehicle and cause an accident.
NOTE: Do not drive at high engine speeds until the engine has reached normal operating temperature.
NOTE: The doors will lock when the vehicle reaches a speed of approximately 9 mph (15 km/h). Auto lock can be set on the Central Display.
NOTE: During extensive parking maneuvers the steering assistance might feel slightly stiffer. This is normal and designed to protect the steering system from overheating.
NOTE: When starting from cold, engine idle speed may be increased and gear changes may occur at higher engine speeds. The catalytic converter will reach its operating temperature quicker and reduce engine emissions.
- With the engine running or the eMotor on, press and hold the brake pedal.
- Select drive or reverse gear, or initiate an upshift by operating the gearshift paddles.
-
Keep the brake pedal depressed and release the parking brake switch. The red status light on the Driver Display will be extinguished.WARNING: If the parking brake is manually released, the vehicle may start to move.NOTE: If the parking brake is not manually released, it will automatically release as the vehicle is driven off forward, or in reverse as long as the following conditions are met:
-
All doors are closed
-
- Carefully depress the accelerator pedal.
Engine warning light
This engine warning light illuminates when the ignition is on and extinguishes as soon as the engine is started, provided no faults exist.
If the light illuminates while driving and the message “Engine System Malfunction” appears on the Driver Display, an engine management fault has been detected and reduced engine performance may be experienced. Stop the vehicle as soon as safety permits and contact your McLaren retailer.
If the engine warning light flashes, it indicates that an engine misfire exists, which could cause damage to the catalytic converters. Reduce the engine speed and load until the warning light stops flashing and continue the journey at a moderate speed.
Limp home mode
Limp home mode activates automatically when vehicle systems detect a fault which may cause further damage unless vehicle or system performance is restricted. Care should be taken while driving in this mode. Contact your McLaren retailer immediately.
Economical driving
Improved fuel economy can be achieved by following this advice:
-
Accelerate smoothly and gently from a standing start.
-
When in manual mode, avoid high engine rpm by changing to a higher gear as soon as possible.
The gear shift indicator (GSI) will illuminate when an upshift would maintain optimum economy.
NOTE: Not available in all markets, consult your McLaren retailer.
-
Avoid labouring or over-revving the engine.
-
Switch off the air conditioning when it is not needed.
-
Avoid journeys where frequent stop/start driving is involved.
- Ensure that your driving style suits the prevailing road and traffic conditions; allow time for smooth, progressive acceleration and braking.
FAQs
This warning light usually indicates a faulty brake system.
The flashing engine temperature warning light signifies that the engine has overheated. Immediately pull over, turn off the engine, and let it cool down.
The battery warning light indicates an issue with the charging system. It’s best to stop driving and inspect the alternator belt and battery connections.
This warning light indicates low oil pressure. Stop immediately and check the oil level.
The airbag warning light indicates an issue with the airbag system. This system must be inspected and repaired by a certified technician to ensure your safety in the case of a collision.
The ABS warning light indicates an issue with the anti-lock brake system. While your conventional brakes should continue to work, it is suggested that you have the ABS system tested and fixed as soon as possible to ensure optimal braking performance.
The TPMS warning light shows that one or more tyres may be underinflated.
This warning light usually signals an issue with the power steering system. Stop the vehicle and check the power steering fluid level. If it is low, fill it to the appropriate level and have the system inspected for leakage.
The check engine light indicates a possible problem with the engine or the emissions system. While it may not be an emergency, it is critical to have the vehicle examined by a specialist to avoid further damage or safety hazards.
The fuel filler cap warning light warns that the fuel cap may not have been properly fastened. Stop the vehicle in a safe spot, then tighten the gasoline cap until it clicks.
The warning light with a key usually signals a problem with the vehicle’s security system or immobiliser. If the indicator remains illuminated, it is advised that a professional inspect the system to guarantee its correct operation.
The flashing coolant level warning light indicates that the engine coolant is critically low.
This warning light prompts occupants to tighten their seatbelts. Before you begin driving, make sure that all occupants are properly restrained.
The TCS warning light indicates a problem with the traction control system. While the car should still be driveable, it is advised that the system be evaluated and fixed to ensure proper traction and stability control.
This warning light indicates an issue with one of the outside lights, such as the headlight, taillight, or brake light. Inspect the external lights and replace any bulbs that are not working properly to ensure visibility and safety on the road.
Useful Links
View Full PDF: 2023 McLaren ARTURA Owner’s Manual|Auto User Guide
2023 McLAREN ARTURA Specs, Price, Features, Mileage and Review