2018 Mitsubishi Eclipse Cross Fixing a blown fuse | Fuse Diagrams
Within the complex network of automotive engineering, where each part is vital to maintaining seamless operation, the fuse appears as a silent protector against electrical accidents. A blown fuse in the 2018 Mitsubishi Eclipse Cross can cause the electrical systems to become unbalanced, which will negatively impact the vehicle’s performance. Exploring the complex world of fuse diagrams becomes essential work for novice and expert mechanics alike. Knowing the fuse diagrams serves as our road map as we set out to fix a blown fuse inside the Eclipse Cross’s maze-like structure, revealing the secrets at the center of this contemporary marvel. Come along with us as we navigate the automotive electrical system’s complexity.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Fuses
Fuse block location
To prevent damage to the electrical system from short-circuiting or overloading, each individual circuit is equipped with a fuse. The fuse blocks are located in the passenger compartment and in the engine compartment.
Passenger compartment
The fuse block in the passenger compartment is located behind the fuse lid in front of the driver’s seat at the position shown in the illustration.
Pull the fuse lid to remove it.
A- Fuse block
Engine compartment
The fuse block in the engine compartment is located as shown in the illustration.
Press the lock lever (1) and remove the fuse block cover (2).
Fuse load capacities
This fuse list shows the names of the electrical systems and their fuse capacities.
There are spare fuses in the fuse block cover in the engine compartment. Always replace a blown fuse with one of the same capacity as the original.
Passenger compartment fuse location table
Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
Engine compartment fuse location table
*: Fusible link
-
Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
-
The table above shows the main equipment corresponding to each fuse.
- The fuse block does not contain spare 7.5 A, 25 A, or 30 A fuses. If one of these fuses burns out, substitute with the following fuse. 7.5 A: 10 A spare fuse
25 A: 20 A spare fuse
30 A: 30 A audio system amplifier fuse When using a substitute fuse, replace it with a fuse of the correct capacity as soon as possible.
Identification of fuse
Fuse replacement
-
Before replacing a fuse, always turn off the electrical item connected to the fuse and turn the ignition switch to the “OFF” position or put the operation mode in OFF.
-
There is a fuse remover (A) in the engine compartment fuse block.
- Clamp it on the fuse you wish to remove, and pull the fuse straight out from the fuse block.
- Use the fuse location diagrams and the matching tables, to check the fuse that is related to the problem. If the fuse is not blown, something else must be causing the problem. Have the system inspected by your authorized Mitsubishi Motors dealer or a repair facility of your choice.
B- The fuse is OK
C- Blown fuse - Insert a new fuse of the same capacity securely into the appropriate slot.
CAUTION
-
Never use a fuse with a capacity greater than the one listed or any substitute, such as wire, foil, etc. This would cause the circuit wiring to heat up and could cause a fire.
-
If the replacement fuse blows again after a short time, have the electrical system checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice to find and correct the cause.
How to fix the fuses of the 2018 Mitsubishi Eclipse Cross
- Fuse Box
- Your Mitsubishi Eclipse Cross’s engine compartment contains the fuse box.
- Identify the Blown Fus
- To determine which fuse is connected to the faulty part, go to the fuse diagram found in the owner’s manual or on the fuse box cover.
- Switch Off the Ignition
- Make sure the car’s ignition is off to prevent electrical risks while the replacement is being done.
- Collect Tools
- To safely remove the blown fuse, use a fuse puller, needle-nose pliers, or a similar instrument. For improved vision, a flashlight can also be useful.
- Remove the Blown Fuse
- Using the fuse puller or pliers, grasp the blown fuse and carefully pull it straight out. Take care not to harm the fuse box or nearby fuses.
- Inspect the Fuse
- Check for a visible broken filament on the blown fuse. If you’re not sure about its state, check for continuity with a multimeter.
- Choose a Replacement Fuse
- To find the right amperage for the replacement fuse, consult the fuse diagram. Misuse of amperage can result in additional problems.
- Insert the Replacement Fuse
- Make sure the replacement fuse fits firmly in the vacant slot by carefully positioning it there. To correctly seat it, gently press down.
- Inspect for Loose Connections
- Verify that the replacement fuse is securely inserted and that the fuse box is free of any loose connections.
- Close the Fuse Box
- If necessary, close the engine compartment fuse box cover.
- Turn On the Ignition
- Restart the ignition and check that the part connected to the replaced fuse is operating properly.
- Take Care of Underlying Concerns
- It’s critical to locate and fix any underlying problems if the fuse blows again or if there are ongoing electrical concerns. To obtain a more thorough diagnosis, think about consulting a specialist.
In addition to considering storing extra fuses in your car for unforeseen circumstances, don’t forget to carefully dispose of the blown fuse.
FAQs
If a fuse blows in your 2018 Mitsubishi Eclipse Cross, the first thing you need to do is find the fuse box. This can usually be done in the engine bay or under the dashboard.
In a 2018 Mitsubishi Eclipse Cross, the fuse box is generally in the engine bay near the battery or the cabin, under the dashboard on the driver’s side.
You can tell if a fuse in your 2018 Mitsubishi Eclipse Cross has blown by looking at the metal strip inside the fuse. The fuse needs to be changed if it’s broken or melted.
If you need to change a fuse in your 2018 Mitsubishi Eclipse Cross, you might need a fuse puller or needle-nose pliers to safely take out the broken fuse.
Yes, you can find fuse diagrams for the 2018 Mitsubishi Eclipse Crossguidebook or on the inside of the fuse box cover.
To keep your 2018 Mitsubishi Eclipse Cross safe from electrical damage or fire, it’s important to change a blown fuse with one that has the right amperage rating, which can be found on the fuse diagram.
In a 2018 Mitsubishi Eclipse Cross, fuses don’t usually need to be changed very often unless there’s an ongoing electrical problem or a part fails.
Yes, changing a blown fuse in your 2018 Mitsubishi Eclipse Cross is a pretty easy job that you can do by following the rules in the owner’s manual.
Make sure the ignition is off before changing the fuse in your 2018 Mitsubishi Eclipse Cross. This will keep you from getting an electrical shock or damaging the car’s systems.
Driving your 2018 Mitsubishi Eclipse Cross with a blown fuse is not a good idea because it could cause more electrical problems or damage to important car systems.
You can keep your 2018 Mitsubishi Eclipse Cross’s fuses from blowing by getting regular repair checks and not overloading the electrical circuits.
Repair parts for your 2018 Mitsubishi Eclipse Cross can be bought at car parts stores, online, or at a Mitsubishi dealership.
Repair parts for your 2018 Mitsubishi Eclipse Cross can be bought at car parts stores, online, or at a Mitsubishi dealership.
If a fuse in your 2018 Mitsubishi Eclipse Cross blows, it needs to be changed to a new one that has the right amperage rating, which can be seen on the fuse diagram. It is not a good idea to reset a fuse that has blown.
Useful Links
View Full PDF: 2018 Mitsubishi Eclipse Cross Owner’s Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Display Instructions: 2018 Mitsubishi Eclipse Cross Cluster Guide