2018 Mitsubishi L200 Owner’s Manual

2018 Mitsubishi L200 Owner’s Manual

The 2018 Mitsubishi L200 is proof of the company’s dedication to building strong and adaptable pickup trucks. Prominent for its robust features and long-lasting construction, the L200 skillfully combines functionality and style. Its aggressive lines and striking front grille, which enhance its aerodynamic efficiency and project a commanding presence, give its appearance an air of might. The L200’s engine is a potent unit that strikes a balance between efficiency and a strong towing capacity. With its contemporary infotainment system and security measures, the interior design provides a comfortable and practical combination. With its ability to handle rough terrain and be a trusty travel companion in cities, the 2018 L200 is the perfect example of Mitsubishi’s commitment to producing a pickup truck that is both versatile and dependable.

2023 Mitsubishi Outlander Specs, Price, Features, Mileage (Brochure)

Keyless operation system*

The keyless operation system allows you to lock and unlock the doors, start the engine and change the operation mode simply by carrying the keyless operation key with you. The switches on the keyless operation key can also be used as the key switch of keyless entry system. The driver should always carry the keyless operation key. This key is necessary for locking and unlocking the doors, starting the engine and otherwise operating the vehicle, so before locking and leaving the vehicle, be sure to check that you have the keyless operation key.

WARNING
People with implantable cardiac pacemakers or implantable cardiovascular defibrillators should not go near the exterior transmitters (A) or the interior transmitters (B). The radio waves used by the keyless operation system could adversely affect implantable cardiac pacemakers or implantable cardiovascular defibrillators.

WARNING
When using electro-medical devices other than implantable cardiac pacemakers or implantable cardiovascular defibrillators, contact the electro-medical device manufacturer ahead of time to determine the effects of radio waves on the devices. Electro-medical device operations could be affected by radio waves.

You can limit the possible operations of the keyless operation system in the following ways. (The keyless operation system can be used as a keyless entry system.) Please consult an MITSUBISHI MOTORS Authorized Service Point.

• You can limit operations to locking and unlocking the doors.
• You can limit operations to starting the engine.
• The keyless operation system can be disabled. When keyless operation system operations are modified, the operating transmitters are as follows.
• Only locking and unlocking doors: exterior transmitter and interior transmitter
• Only starting the engine: interior transmitter

NOTE

• The keyless operation key uses an ultraweak electromagnetic wave. In the following cases, the keyless operation system may not operate properly or may be unstable.
• When there is equipment nearby that emits strong radio waves, such as: a power station, a radio/TV broadcasting station or an airport.
• The keyless operation system is carried together with a communications device such as a cellular phone or radio set, or with an electronic device such as a personal computer.
• The keyless operation key is touching or covered by a metal object.
• A keyless entry system is being used nearby.
• When the keyless operation key battery is worn out.
• When the keyless operation key is placed in an area with strong radio waves or noise. In such cases, use the emergency key.
• Because the keyless operation key receives signals in order to communicate with the transmitters in the vehicle, the battery continually wears down regardless of keyless operation key use. The battery life is 1 to 2 years, depending on usage conditions. When the battery wears out, replace the battery according to the description in this manual or have it replaced a MITSUBISHI MOTORS Authorized Service Point.
• Because the keyless operation key continually receives signals, strong radio wave reception could affect battery wear. Do not leave the key near a TV, personal computer, or other electronic device.

Operating range of the keyless operation system
If you are carrying the keyless operation key, enter the operating range of the keyless operation system, and press the driver’s or front passenger’s door lock/unlock switch, the ID code for your key is verified. You can lock and unlock the doors, start the engine and change the operation mode only if the ID codes of your keyless operation key and the vehicle match.

NOTE
If the keyless operation key battery is wearing out or there are strong electromagnetic waves or noise present, the operating range may become smaller and the operation may become unstable.

The operating range for locking and unlocking the doors
The operating range is approximately 70 cm from the driver’s or front passenger’s door lock/unlock switch.

NOTE

• Locking and unlocking operate only when you press a door switch that detects the keyless operation key.
• Operation may not be possible if you are too close to the front door, or door window.
• Even if the keyless operation key is within 70 cm of the driver’s or front passenger’s door lock/unlock switch, if the key is near the ground or high up, the system may not operate.
• If the keyless operation key is within the operating range, even someone not carrying the key can lock and unlock the doors by pressing the driver’s or front passenger’s door lock/unlock switch.

The operating range for starting the engine and changing the operation mode
The operating range is the interior of the vehicle.

NOTE
Even if it is within the operating range, if the keyless operation key is in a small item holder such as the glove box, on top of the instrument panel, door pocket or in the luggage compartment, it may be impossible to start the engine and change the operation mode. If a keyless operation key is too close to the door or door window, it may be possible to start the engine or change the operation mode even when the key is outside the vehicle.

To operate using the keyless operation function

Locking the doors
When you are carrying the keyless operation key, if you press the driver’s or front passenger’s door lock/unlock switch (A), within the operating range, the doors are locked. The turn-signal lamps will blink once. Also refer to “Locking and unlocking: Doors, Central door locks” on pages 3-15, and 3-17.

Unlocking the doors
When you are carrying the keyless operation key, if you press the driver’s or front passenger’s door lock/unlock switch (A), within the operating range, all the doors are unlocked. If the room lamp switch is in the middle (•) position at this time, the room lamp will turn on for 15 seconds. The turn-signal lamps will blink twice. If the driver’s or front passenger’s door lock/ unlock switch is pressed and any of the doors is not opened within approximately 30 seconds, relocking will automatically occur.

NOTE

• For vehicles equipped with the mirror retractor switch, the outside rear-view mirrors automatically retract/extend when all the doors are locked/unlocked using the keyless operation function. Refer to “Starting and driving: Outside rear-view mirrors” on page 6-09.
• For vehicles equipped with the Dead Lock System, pressing the driver’s or front passenger’s door lock/unlock switch (A) two times in succession causes the Dead Lock System to be set.
• The keyless operation function does not operate under the following conditions:

NOTE

• The keyless operation key is inside the vehicle.
• A door is open or ajar.
• The operation mode is not in OFF.
• The time between unlocking and automatic locking can be adjusted. Please consult an MITSUBISHI MOTORS Authorized Service Point.

Electric window control*
The electric windows can only be operated with the ignition switch or the operation mode in ON.

Electric window control switch
Each door window opens or closes while the corresponding switch is operated.

1. Driver’s door window
2. Front passenger’s door window
3. Rear left door window (Double cab)
4. Rear right door window (Double cab)
5. Lock switch

WARNING

• Before operating the electric window control, make sure that nothing can get trapped (head, hand, finger, etc.).
• Never leave the vehicle without removing the key.
• Never leave a child (or other person who might not be capable of safe operation of the electric window control) in the vehicle alone.
• The child may tamper with the switch at the risk of its hands or head being trapped in the window.

Driver’s switches
The driver’s switches can be used to operate all door windows. A window can be opened or closed by operating the corresponding switch. Press the switch down to open the window, and pull up the switch to close it. If the switch for the driver’s window is fully pressed down/pulled up, the door window automatically opens/closes completely. If you want to stop the window movement, operate the switch lightly in the reverse direction.

Passenger’s switches
The passenger’s switches can be used to operate the corresponding passenger’s door windows. Press the switch down to open the window, and pull up the switch to close it.

NOTE

• Repeated operation with the engine stopped will run down the battery. Operate the window switches only while the engine is running.
• The rear door windows only open halfway.

Lock switch
When this switch is operated, the passenger’s switches cannot be used to open or close the door windows and the driver’s switch cannot open or close any door windows other than the driver’s door window.

Timer function
The door windows can be opened or closed for 30 seconds after the engine is stopped. However, once the driver’s door or the front passenger’s door is opened, the windows cannot be operated.

Safety mechanism (driver’s window only)
When the door window is automatically closed by pulling up the switch fully, if a hand or head is trapped in the closing window, it will lower automatically. Nonetheless, make sure that nobody puts their head or hand out of the window when closing the driver’s door window. The lowered window will become operational after a few seconds.

WARNING
If the battery terminals are disconnected or the fuse for electric window is replaced, the safety mechanism will be cancelled. If a hand or head got trapped, a serious injury could result.

CAUTION

• The safety mechanism is cancelled just before the window is fully closed. This allows the window to close completely. Therefore be especially careful that no fingers are trapped in the window.
• The safety mechanism is deactivated while the switch is pulled up. Therefore be especially careful that fingers are not trapped in the door window opening.

NOTE

• The safety mechanism can be activated if the driving conditions or other circumstances cause the driver’s door window to be subjected to a physical shock similar to that caused by a trapped hand or head.
• If the safety mechanism is activated five or more times in a row, the safety mechanism will be cancelled and the door window will not close correctly. In such a case, the following procedure should be implemented to rectify this situation. If the window is open, repeatedly raise the driver’s door window switch until that window has been fully closed. Following this, release the switch, raise the switch once again and hold it in this condition for at least
• second, then release it. You should now be able to operate in the normal fashion.
• If the battery terminals are disconnected or the fuse for electric window is replaced, the safety mechanism will be cancelled and the door window will not automatically open/ close completely. If the window is open, repeatedly raise the driver’s door window switch until the window has been fully closed. Following this, release the switch, raise the switch once again and hold it in this condition for at least 1 second, then release it. You should now be able to operate the driver’s door window in the normal fashion.

FAQs

Useful Link

Download Manuals: https://mitsubishi-motors.co.uk/manuals-and-guides/owners-manuals/

2020 Mitsubishi L200 Owner’s Manual

2019 Mitsubishi L200 Owner’s Manual