2020 Mitsubishi Eclipse Cross Dashboard Instrument Cluster Guide
When you get inside the 2020 Mitsubishi Eclipse Cross, you’ll see a dashboard that combines cutting-edge technology with comfortable design in a way that makes you feel like you’re in a world of car innovation. There is an instrument cluster in the front, which is a wonder of modern design and easy use. It has a sleek digital display that shows a lot of useful information, like speed and fuel levels, as well as navigation directions and diagnostics for the car. All of this information is easy for drivers to see and get to. With its bright colors and clear graphics, the cluster not only shows important information but also acts as the room’s main point, giving off an air of sophistication.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Instrument cluster
- Tachometer
- Multi-information display Information screen display list
- Speedometer
- Rheostat illumination button
Speedometer
The speedometer shows the vehicle speed in miles per hour (mph) or kilometers per hour (km/h).
Tachometer
The tachometer shows engine revolutions per minute. This allows the driver to determine the most efficient selector position and engine speed combinations. This gauge also assists in evaluating engine performance.
Meter illumination control
Each time you press this button, there is a sound, and the brightness of the instruments changes.
- Brightness level
- Rheostat illumination button
NOTE
- You can adjust to 8 different levels for when the front side marker lights are illuminated and when they are not.
- If the vehicle is equipped with the automatic light control, the light switch is in a position other than the “OFF” position and it is sufficiently dark outside the vehicle, the meter illumination switches automatically to the adjusted brightness.
NOTE
- The brightness level of the instruments is stored when the ignition switch is turned to the “OFF” position or the operation mode is put in OFF.
- If you press and hold the button for longer than approximately 2 seconds when the front side marker lights are illuminated, the brightness level changes to the maximum level. Pressing and holding the button for longer than approximately 2 seconds again returns the brightness level to the previous level. On vehicles equipped with Smartphone Link Display Audio, the map screen color may not be switched to the nighttime setting when the meter illumination brightness level is at the maximum.
FAQs
The 2020 Mitsubishi Eclipse Cross’s dashboard instrument cluster tells the driver important things like the car’s speed, fuel level, engine temperature, and other data.
To change how bright the display in the 2020 Mitsubishi Eclipse Cross’s instrument panel is, look for the button that lets you do that. It’s usually near the dashboard or steering column. Depending on your taste, you can make it brighter or darker.
To clear the trip meter on the 2020 Mitsubishi Eclipse Cross’s instrument cluster, find the trip button on the cluster. Hold it down until the meter goes back to zero.
The check engine light in your 2020 Mitsubishi Eclipse Cross’s instrument panel means that there might be a problem with the engine or the system that controls emissions.
The 2020 Mitsubishi Eclipse Cross’s instrument panel has a fuel gauge that shows how much fuel is left in the tank. As the needle gets closer to “E,” it’s time to fill up with gas again.
Most of the time, you can change how the 2020 Mitsubishi Eclipse Cross’s instrument panel displays things.
If the speedometer in the center console of your 2020 Mitsubishi Eclipse Cross isn’t working right, check the speed sensor and the links to the wiring.
In the 2020 Mitsubishi Eclipse Cross, you can usually use buttons or controls on the steering wheel or dashboard to switch between the different information displays on the instrument panel.
The 2020 Mitsubishi Eclipse Cross’s instrument panel might have a feature that lets you know when it’s time for routine maintenance like oil changes or tire rotations.
When it comes to the 2020 Mitsubishi Eclipse Cross, the odometer reading is usually very correct because it directly measures the distance the car has traveled. It is always a good idea to check it against GPS or other accurate sources every so often, though.
Some 2020 Mitsubishi Eclipse Cross models may have a speed limit warning tool that lets you set a certain speed limit. If you go over this limit, the instrument cluster will let you know, which will make you a better driver.
If your 2020 Mitsubishi Eclipse Cross’s temperature gauge shows that it is getting too hot, pull over to a safe place right away and turn off the engine. Wait for the car to cool down before checking the coolant levels.
Based on the model, you might be able to reset the service light on the 2020 Mitsubishi Eclipse Cross’s instrument panel by yourself.
If you want to make sure that the compass display in your 2020 Mitsubishi Eclipse Cross is properly calibrated, drive the car in loops or figure eights in a flat area away from magnetic interference until the compass correctly shows your direction.
Useful Links
View Full PDF: 2020 Mitsubishi Eclipse Cross User Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
2020 Mitsubishi Eclipse Cross Display Setting | Features Guide