2020 Mitsubishi L200 Display Setting | Multi-mode display Guide
The 2020 Mitsubishi L200 is a strong contender in the world of car innovation. It has a lot of high-tech features that change the way you drive. One thing that makes it stand out is the high-tech display screen setting, which is where technology and ease of use meet. When you walk into the house, you’ll see a carefully thought-out interface that combines usefulness with good looks. These digital hubs are the brains of the car and offer a huge range of customizable options based on the driver’s choices. From help with navigation to controls for fun, the display screen setting makes it easy to get to and manage different onboard systems. Its easy-to-use interface makes contact seamless, which improves the driving experience as a whole. The display screen setting is more than just useful; it shows Mitsubishi’s dedication to new ideas and makes the L200 an even better example of an excellent car.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Multi-information display -Type 2
Always stop the vehicle in a safe place before operating. The following information is included on the multi-information display: odometer, trip-ter, average fuel consumption, etc.
- Engine coolant temperature display
- Gearshift indicator
- Fuel remaining display
- Information display
- Service reminder
NOTE
- When the ignition switch is OFF, the gear-shift indicator, fuel remaining display and engine coolant temperature display are not displayed.
Information display
Each time you lightly press the multi-information display switch (A), the display switches in the following order.
- Odometer
- Tripmeter A
- Tripmeter B
- Meter illumination control
- Driving range display
- Average fuel consumption display
- Service reminder (distance)
- Service reminder (month)
NOTE
- When the ignition switch is OFF, the driving range display and average fuel consumption display are not displayed.
- While driving, the service reminder is not displayed even if you operate the multi-information display switch.
Odometer
The odometer indicates the distance travelled.
Tripmeter
The trip meter indicates the distance travelled between two points.
Example usage of trip meter A and trip meter B.
It is possible to measure two currently traveled distances, from home using trip meter A and from a particular point on the way using trip meter B.
To reset the trip meter
To return the display to 0, hold down the multi-information display switch for about 2 seconds or more. Only the currently displayed value will be reset.
Example
If trip meter A is displayed, only trip meter A will be reset.
NOTE
- When disconnecting the battery terminal, the memory of trip meters A and B are cleared, and the display returns to “0”.
Meter illumination control
Each time you press and hold the multi-information display switch (2) for about 2 seconds or more, there is a sound and the brightness of the instruments changes.
- Brightness level
- Multi-information display switch
NOTE
- You can adjust to 8 different levels respectively for when the position lamps are illuminated and when they are not.
Each time you reduce two brightness levels, the segment display of the brightness level decreases one by one. - If the vehicle is equipped with the automatic lamp control, when the lamp switch is in a position other than the “OFF” position, the meter illumination switches automatically to the adjusted brightness, depending on the brightness outside the vehicle.
- The brightness level of the instruments is stored when the ignition switch is turned off.
Driving range display
This displays the approximate driving range (how many more kilometres or miles you can drive). When the driving range falls below approximately 50 km (30 miles), “—” is displayed.
NOTE
- The driving range is determined based on the fuel consumption data. This may vary depending on the driving conditions and habits. Treat the distance displayed as just a rough guideline.
- When you refuel, the driving range display is updated.
However, if you only add a small amount of fuel, the correct value will not be displayed. Fill with a full tank whenever possible. - On rare occasions, the value displayed for the driving range may change if you are parked on an extremely steep incline. This is due to the movement of fuel in the tank and does not indicate a malfunction.
- The display setting can be changed to the preferred units (km or miles).
Average fuel consumption display
This displays the average fuel consumption from the last reset to the present time.
The reset mode conditions for the average fuel consumption display can be switched between “Auto-reset” and “Manual reset”. For information on how to change the average fuel consumption display setting.
NOTE
- The average fuel consumption display can be reset separately for the auto reset mode and the manual reset mode.
“—” is displayed when the average fuel consumption cannot be measured. - The initial (default) setting is “Auto reset mode”.
- The average fuel consumption depends on the driving condition (road condition, driving behavior, etc.). The displayed fuel consumption may vary from the actual fuel consumption. Treat the fuel consumption displayed as just a rough guideline.
- The memory of the auto reset mode or manual reset mode for the average fuel consumption display is erased if the battery is disconnected.
- The display setting can be changed to the preferred units {km/L, L/100 km, mpg}.
Engine coolant temperature display
This indicates the engine coolant temperature.
If the coolant becomes hot, “ ” will blink.
Pay careful attention to the engine coolant temperature display while you are driving.
CAUTION
- If the engine is overheating, “ ” will blink. In this case, the bar graph is in the red zone. Immediately park the vehicle in a safe place and take the required measures. Refer to “Engine overheating” on page 8-09.
Fuel remaining display
The fuel remaining display indicates the fuel level in the fuel tank when the ignition switch is ON.
- 1- Full
- 0- Empty
NOTE
- It may take several seconds to stabilize the display after refilling the tank.
- If fuel is added with the ignition switch is ON, the fuel gauge may incorrectly indicate the fuel level.
- The fuel lid mark (A) indicates that the fuel tank filler door is located on the left side of the vehicle.
Fuel remaining warning display
If the remaining fuel level is approximately 10 liters or less (one segment displayed) when the ignition switch is turned to the “ON” position, the last segment of the fuel gauge flashes. If the remaining fuel level is reduced further, the last segment of the fuel gauge goes out and “ ” flash.
CAUTION
- Do not drive with an extremely low fuel level; running out of fuel could cause damage to the fuel system.
NOTE
- On inclines or curves, the display may be incorrect due to the movement of fuel in the tank.
Service reminder
Displays the approximate time until the next periodic inspection that MITSUBISHI MOTORS recommends.“—” is displayed when the inspection time has arrived.
The spanner mark indicates the periodic inspection.
NOTE
- Depending on the vehicle specifications, the displayed time until the next periodic inspection may differ from what MITSUBISHI MOTORS recommends.
In addition, the display settings for the next periodic inspection time can be modified. To modify the display settings, have it adjusted at an MITSUBISHI MOTORS Authorized Service Point.
For more details, contact an MITSUBISHI MOTORS Authorized Service Point.
- Displays the time until the next periodic inspection.
NOTE
The distance is shown in units of 100 km (100 miles). The time is shown in units of months. - This informs you that a periodic inspection is due. Please consult an MITSUBISHI MOTORS Authorized Service Point.
- After your vehicle is inspected at an MITSUBISHI MOTORS Authorized Service Point, it displays the time until the next periodic inspection.
To reset
The “—” display can be reset while the ignition switch is in OFF.
- When you lightly press the multi-information display switch a few times, the information display switches to the service reminder display.
- Press and hold the multi-information display switch for about 2 seconds or more to make the spanner mark start flashing.(If there is no operation for about 10 seconds with flashing, the display will revert to its original indication.)
- Lightly press the multi-information display switch while the icon is flashing to change the display from “—” to “cLEAr”. After this, the time until the next periodic inspection will be displayed.
CAUTION
- The customer is responsible for making sure that periodic inspections and maintenance are performed.
Inspections and maintenance must be performed to prevent accidents and malfunctions.
NOTE
- “—” display cannot be reset when the ignition switch is ON.
- When “—” is displayed, after a certain distance and a certain period, the display is reset and the time until the next periodic inspection is displayed.
- If you accidentally reset the display, consult an MITSUBISHI MOTORS Authorized Service Point.
Changing the function settings
The “Average fuel consumption reset mode”, “Fuel consumption unit” and “Temperature unit” settings can be modified as desired when the ignition switch is ON.
CAUTION
- The driver should not operate the display while the vehicle is in motion.
- When operating the system, stop the vehicle in a safe area.
Changing the reset mode for average fuel consumption
The mode conditions for the average fuel consumption display can be switched between “Auto-reset” and “Manual reset”.
- When you lightly press the multi-information display switch a few times, the information display switches to the driving range display.
- Each time you press the information display switch for 2 seconds or more on the driving range display, you can switch to reset mode for average fuel consumption. (A: Auto reset mode, B: Manual reset mode)
Manual reset mode
- When the average fuel consumption is being displayed, if you hold down the multi-information meter switch, the average fuel consumption displayed at that time is reset.
- When the ignition switch is turned from the “ACC” or “LOCK” position to the “ON” position, the mode setting is automatically switched from manual to auto.
Auto reset mode
- When the average fuel consumption is being displayed, if you hold down the multi-information display switch, the average fuel consumption displayed at that time is reset.
- When the ignition switch is in the “ACC” or “LOCK” position for approximately 4 hours or longer, the average fuel consumption display is automatically reset.
NOTE
- The average fuel consumption display can be reset separately for the auto reset mode and the manual reset mode.
- The memory of the auto reset mode or manual reset mode for the average fuel consumption display is erased if the battery is disconnected.
- The initial (default) setting is “Auto reset mode”.
Changing the fuel consumption display unit
The display unit for fuel consumption can be switched. The distance and amount of units are also switched to match the selected fuel consumption unit.
- When you lightly press the multi-information display switch a few times, the information display switches to the average fuel consumption display.
- Press and hold the multi-information display switch for about 5 seconds or more until the buzzer sound is heard twice.
- Press and hold the multi-information display switch to switch in sequence from “km/L” → “L/100 km” → “mpg” → “km/L”.
NOTE
- The display units for the driving range, and the average fuel consumption are switched, but the units for the indicating needle (speedometer), the odometer, the trip meter, and the service reminder will remain unchanged.
- The memory of the unit setting is erased if the battery is disconnected, and it returns automatically to the factory setting.
The distance units are also switched in the following combinations to match the selected fuel consumption unit.
Fuel consumption |
Distance (driving range) |
km/L |
km |
L/100 km |
km |
mpg |
mile(s) |
FAQs
Yes, you can change how bright the screen is in your 2020 Mitsubishi L200. These days, you can do this by going to the settings menu and finding the light settings.
Yes, you can change how bright the screen is in your 2020 Mitsubishi L200. These days, you can do this by going to the settings menu and finding the light settings.
The 2020 Mitsubishi L200 lets you change the language settings, view choices, and wallpaper on the screen. You can also set up the layout of the screen.
To connect your phone to the screen in your 2020 Mitsubishi L200, go to the settings menu, pick “Bluetooth,” and then pick “Pair Device.” To finish the pairing process, follow the steps shown on the screen.
You can change how you want to navigate in the 2020 Mitsubishi L200 by using the screen. Setting up home and work addresses and favourite routes is part of this.
To change the sound settings on your 2020 Mitsubishi L200’s screen, go to the audio settings page. There, you can change things like the bass, treble, and balance.
Yes, you can add different devices, like USB drives, to the screen of your 2020 Mitsubishi L200. You should be able to view the drive’s contents through the screen after plugging the USB drive into the right port.
The 2020 Mitsubishi L200 has a screen that lets you access several safety features. These include settings for the rearview camera, choices for parking assist, and changes to the lane departure warning.
Make changes to the message alerts on your 2020 Mitsubishi L200’s screen by going to the settings menu, selecting “Message Settings,” and then picking the choices you want, such as the tone of the alert and how long it stays on the screen.
Yes, you can return the 2020 Mitsubishi L200’s screen settings to their original state. Most of the time, you can do this by going to the settings menu and choosing “Reset” or “Factory Reset.”
It is possible to change the language on the screen of your 2020 Mitsubishi L200. Access the settings page, pick “Language,” and then pick the language you want to use from the list.
It’s easy to change the time and date on your 2020 Mitsubishi L200’s screen. Just go to the settings menu, choose “Clock,” and then follow the on-screen instructions.
The 2020 Mitsubishi L200 has maintenance reminders that can be accessed through the screen. These include prompts to change the oil, rotate the tyres, and get serviced at regular intervals.
Yes, you can change how the widgets on your 2020 Mitsubishi L200 screen are laid out. The “Widget Layout” choice in the settings menu is usually all you need to do this.
Because it’s safer, the 2020 Mitsubishi L200 may not let you change some screen settings while you’re driving. But you can usually change simple settings like the volume of the sound and the temperature without being bothered.
Useful Links
View Full PDF: 2020 Mitsubishi L200 Owner’s Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Upgrading Your Fuse Box: 2020 Mitsubishi L200 Fuse Diagram Guide