2020 Mitsubishi Mirage G4 Fuses and Fuse Box User Guide
Fuse boxes are standard on the 2020 Mitsubishi Mirage G4, and they are essential for safeguarding the electrical system of the car. Maintaining the functionality of the car requires knowing the different types of fuses and where they are located. Different fuses that protect various electrical components from power surges and short circuits are kept in the fuse box of the Mirage G4. Through familiarity with the layout and fuses, drivers may successfully troubleshoot electrical faults. Being familiar with the Mirage G4’s fuse box is essential, whether it’s for changing a blown fuse or figuring out which exact fuse is needed for a given function. These fuses guard against harm to the car’s wiring and components by breaking the circuit in the case of an electrical overload. It is essential for Mirage G4 owners to have a solid understanding of their car’s fuse box because improper fuse maintenance guarantees the seamless running of the electrical systems.
2023 MITSUBISHI MIRAGE G4 Specs, Price, Features, Mileage (Brochure
Mirage G4 Fuses
Fuse block location
To prevent damage to the electrical system from short-circuiting or overloading, each circuit is equipped with a fuse. The fuse blocks are located in the passenger compartment and in the engine compartment.
Passenger compartment
The fuse block in the passenger compartment is located in front of the driver’s seat at the position shown in the illustration.
Engine compartment
In the engine compartment, the fuse block is located as shown in the illustration.
While pressing the tab (A or B), pull up the cover.
Fuse load capacities
This fuse list shows the names of the electrical systems and their fuse capacities.
There are spare fuses in the fuse block in the engine compartment. Always replace a blown fuse with one of the same capacity as the original.
Passenger compartment fuse location table
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
Engine compartment fuse location table
-
Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
-
The table above shows the main equipment corresponding to each fuse.
-
Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
-
The table above shows the main equipment corresponding to each fuse.
The fuse block does not contain spare 7.5 A, 10 A or 15 A fuses. If one of these fuses burns out, substitute with the following fuse.
7.5 A: Outside rearview mirrors
10 A: Option
15 A: Cigarette lighter
When using a substitute fuse, replace it with a fuse of the correct capacity as soon as possible.
Identification of fuse
How to Replace the Fuse of Mitsubishi Mirage G4 2020
- Before replacing a fuse, always turn off the electrical item concerned to the fuse and turn the ignition switch to the “OFF” position or put the operation mode in OFF.
- There is a fuse remover (A) in the engine compartment fuse block.
- Clamp it on the fuse you wish to remove, and pull the fuse straight out from the fuse block.
- Use the fuse location diagrams and the matching tables, to check the fuse that is related to the problem. If the fuse is not blown, something else must be causing the problem. Have the system inspected by your authorized Mitsubishi Motors dealer or a repair facility of your choice.
B- Fuse is OK
C- Blown fuse - Insert a new fuse of the same capacity securely into the appropriate slot.
CAUTION
- Never use a fuse with a capacity greater than the one listed or any substitute, such as wire, foil etc. This would cause the circuit wiring to heat up and could cause a fire.
- If the replacement fuse blows again after a short time, have the electrical system checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice to find and correct the cause.
FAQs
The 2020 Mitsubishi Mirage G4’s fuse box is on the driver’s side, under the dashboard.
Changing the fuses in your 2020 Mitsubishi Mirage G4 usually just requires a fuse puller and some spare fuses.
Check the fuse for any signs of cloudiness or broken wires. To find the faulty fuse, go to the 2020 Mitsubishi Mirage G4 fuse box diagram.
Yes, a spare set of fuses is typically included in the fuse box of the 2020 Mitsubishi Mirage G4.
Using a bigger amp fuse could cause harm to your electrical system, so it’s not a good idea. The amp rating must be strictly adhered to.
Before you buy new fuses, find out why the old ones are blowing. It could be due to a short circuit or something else entirely. Then fix that.
For the 2020 Mitsubishi Mirage G4, it is important to check the fuses during the regular maintenance checks and replace them when necessary to keep the electrical system running well.
There is no hard and fast rule, however it is recommended to begin by identifying the fuses associated with the broken part, using the fuse box diagram as a reference.
Checking and changing the appropriate fuses is a common solution to common problems like lights, power windows, and audio systems not working.
You can temporarily drive with a blown fuse if it’s a non-essential component, though it’s not recommended. Nevertheless, it is advised to replace it promptly.
To avoid electrical shocks, make sure the car is turned off, disconnect the battery, and follow all other safety procedures.
Useful Links
View Full PDF: 2020 Mitsubishi Mirage G4 Owner’s Manual| Auto User Guide
2023 MITSUBISHI MIRAGE G4 Specs, Price, Features, Mileage (Brochure
2020 Mitsubishi Mirage G4 Warning Lights and Indicators Guide