2021 Mitsubishi Mirage G4 Instrument Cluster Guidelines
The 2021 Mitsubishi Mirage G4’s instrument panel has a sleek and easy-to-use interface that combines important information with more advanced features to make driving more enjoyable. A bright and easy-to-use digital monitor in the middle of the cluster shows speed, fuel level, and engine performance in real-time. With analogue numbers for the tachometer and odometer that are clear and easy to read on either side, the cluster is a good mix of new and old. The multifunctional controls on the steering wheel make it easy for drivers to switch between settings and choices without getting distracted. The 2021 Mitsubishi Mirage G4’s instrument panel is a perfect example of how high-tech and useful things can work together. Its well-thought-out design and large information screen make it easy to use.
2023 MITSUBISHI MIRAGE G4 Specs, Price, Features, Mileage (Brochure)
Indicator and warning light package
-
High beam indicator
-
Electric power steering system warning light
-
Tire pressure monitoring system warn-ing light
-
Turn signal indicators/Hazard warning lights
-
Forward Collision Mitigation system (FCM) indicator
-
Front fog light indicator (if so equipped)
-
Door-ajar warning light
-
Supplemental Restraint System (SRS) warning light
-
High coolant temperature warning light (red)
-
Low coolant temperature indicator (green)
-
ECO indicator
-
Oil pressure warning light
-
Engine malfunction indicator (“SER-VICE ENGINE SOON”)
-
Charging system warning light
-
Brake warning light
-
Anti-lock braking system warning light
-
Multi-information display
-
Cruise control indicator (if so equipped)
-
Driver’s seat belt reminder/warning light
-
Forward Collision Mitigation system (FCM) OFF indicator
-
Active stability control (ASC) indica-tor/warning light
-
Lane Departure Warning (LDW) light (yellow) (if so equipped)
-
Automatic High Beam (AHB) warning light (yellow) (if so equipped)
-
Active stability control (ASC) OFF indicator/warning light
-
Position indicator (if so equipped)
- Lane Departure Warning (LDW) indi-cator (green) (if so equipped) Automatic High Beam (AHB) indicator (green) (if so equipped)
Indicators
Turn signal indicators/Hazard warning lights
The arrows will flash in time with the corre-sponding exterior turn signals when the turn signal lever is used. Both arrows will flash when the hazard warning flasher switch is pressed.
NOTE
- If the indicator flashes faster than usual or if the indicator stays on without flashing, check for a malfunctioning turn signal light bulb or turn signal connection.
High beam indicator
A blue light comes on when the headlights are on high beam.
Front fog light indicator (if so equipped)
This indicator comes on while the front fog lights are on.
Position indicator (if so equipped)
This indicator light illuminates while the parking lights are on.
Low coolant temperature indi-cator – green
This indicator comes on in green while the coolant temperature is low.
NOTE
- When the indicator goes out, this should be used as a rough indication of when the heat-ing starts working.
ECO indicator
This indicator comes on while fuel-efficient driving is achieved.
Warning lights
Brake warning light and buzzer
This light comes on when the ignition switch is turned to the “ON” position (engine off) or the operation mode is put in ON. When the engine is started, the light should go off a few seconds later. The warning light also illuminates after starting the engine under the following condi-tions.
-
When the parking brake is still applied.
-
When the brake fluid level is low.
-
When the brake system circuit is not working properly.
When the vehicle is moving at more than 5 mph (8 km/h) and the parking brake is applied, a buzzer will sound to inform the driver that the parking brake is not properly released. Before driving, be sure that the parking brake is fully released and the brake warning light is off.
CAUTION
-
If the brake warning light and the Anti-lock braking system warning light are illuminated at the same time, the braking force distribution function will not operate, the vehicle may be destabilized during sudden braking under the following conditions.
-
When the brake warning light does not go out even when the parking brake is released.
-
When the brake warning light stays on while driving. If the above occurs, avoid sudden braking and high-speed driving. Park the vehicle in a safe place, and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible.
-
-
The vehicle should be brought to a halt in the following manner when brake performance deteriorates.
-
Confirm that the vehicle slows down when you press down on the brake pedal harder than usual. In some cases, the brake pedal may go all the way to the floor.
-
Should the brakes fail, use engine braking to reduce your speed and slowly apply the parking brake. Depress the brake pedal to illuminate the stop lights and to alert the vehicles behind you.
-
Engine malfunction indicator (“SERVICE ENGINE SOON”)
This indicator is a part of the onboard diag-nostic (OBD) system which monitors the emissions, engine control system or continuously variable transmission (CVT) control system. If a problem is detected in one of these systems, this indicator illuminates or flashes. When the ignition switch is turned to the “ON” position or the operation mode is put in ON, this indicator normally comes on and goes off after the engine has started. This indicator will come on if the fuel tank filler cap is not properly tightened. If this indicator comes on and stays on after refuelling, stop the engine and check that the cap is properly tightened. (Turn the cap clockwise until you hear clicking sounds.) If this indicator does not go off after several seconds or lights up while driving, have the system checked immediately at an authorized Mitsubishi Motors dealer or a repair facility of your choice.
2023 MITSUBISHI MIRAGE G4 Specs, Price, Features, Mileage (Brochure)
CAUTION
- Driving for a long time with the engine malfunction indicator on may cause more damage to the emission control system. This could also affect fuel economy and drivability.
- If this indicator does not come on when the ignition switch is turned to the “ON” position or the operation mode is put in ON, have the system checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice.
- If the engine malfunction indicator comes on while the engine is running, avoid driving at high speeds. During vehicle operation with the indicator on, the vehicle may not accelerate when you depress the accelerator pedal. When the vehicle is stationary with the indi-cator on, you must depress the brake pedal more firmly than usual since the engine idling speed is higher than usual and a vehi-cle with a CVT has a stronger tendency to creep forward.
- Do not disconnect the battery cable when the engine malfunction indicator (“SERVICE ENGINE SOON”) is on.
The engine electronic control module stores critical OBD information (especially exhaust emission data), which may be lost if the bat-tery cable is disconnected while the engine malfunction indicator is on. This will make it difficult to diagnose the cause of future problems.
Charging system warning light
This light comes on in the event of a malfunction in the charging system or when the ignition switch is turned to the “ON” position (engine off) or the operation mode is put in ON. When the engine is started, the light should go out. Check to make sure that the light has gone out before driving.
CAUTION
- If the warning light stays on while the engine is running, park your vehicle in a safe place immediately and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
Oil pressure warning light
This light comes on when the engine oil pressure is below normal. If the light stays on while driving, stop the engine as soon as possible. Do not run the engine until the cause of the low oil pressure is corrected.
CAUTION
-
If this light comes on when the engine oil level is not low, have your vehicle checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice.
-
This warning light does not show the amount of oil in the crankcase. This can only be determined by checking the oil level with the dipstick with the engine turned off.
High coolant temperature warning light – red
This light comes on in red if the coolant temperature becomes excessively high.
CAUTION
- If the light comes on during vehicle opera-tion, it indicates that the engine is possibly overheating. Continued driving could make the engine fail. Immediately stop the vehicle in a safe place and take appropriate action.
NOTE
- The high coolant temperature warning light may illuminate when the vehicle has been driven at high speeds or on hilly roads. This illuminating does not necessarily indicate a problem. It should stop if you keep the engine running for a while or continue driv-ing the vehicle.
Door-ajar warning light and buzzer
This light comes on when any door is open or not completely closed. When the vehicle is moving at more than 5 mph (8 km/h) and any door is open or ajar, a tone will sound 4 times to inform the driver that any door is not properly shut.
CAUTION
- Before driving, make sure that the door-ajar warning light is off.
- When the auto cut-out function of the doom light is been activated, the light goes out automatically after about 30 minutes.
FAQs
The instrument cluster in the 2021 Mirage G4 serves as the primary display for important information such as vehicle speed, fuel level, and trip data.
The 2021 Mirage G4 typically features a simple and user-friendly analog instrument cluster.
The instrument cluster displays critical information like speed, fuel level, engine temperature, and various warning lights. It also includes a digital trip computer for trip-related data.
The speedometer is prominently displayed in analog format, making it easy for drivers to monitor their vehicle’s speed.
The Mirage G4’s instrument cluster is usually not customizable, but it provides essential information to keep drivers informed.
The fuel gauge displays the current level of fuel in the vehicle’s gas tank, helping drivers know when it’s time to refuel.
Typically, you can reset the trip computer by following instructions in the owner’s manual. It’s often as simple as pressing a button on the cluster’s interface.
The Mirage G4’s instrument cluster may show maintenance reminders for routine service intervals, such as oil changes and tire rotations.
Yes, the instrument cluster includes warning lights for various potential issues like low oil pressure, engine temperature, and other critical alerts.
Yes, you can typically adjust the brightness of the instrument cluster display to suit your preferences and driving conditions.
Many vehicles, including the 2021 Mirage G4, have an automatic night mode that dims the instrument cluster display for improved visibility during nighttime driving.
If a warning light appears, take appropriate action, which may include checking or servicing the vehicle.
Retrofitting a digital instrument cluster can be challenging and may require professional installation. It’s best to consult with a Mitsubishi dealership or an experienced technician for guidance.
While the instrument cluster is generally reliable, any issues should be addressed by a certified Mitsubishi technician for proper diagnosis and repair.
It’s a good practice to glance at the instrument cluster regularly while driving to ensure you’re aware of your vehicle’s status and conditions.
Upgrading the instrument cluster is possible but may be complex and costly. Consult with a Mitsubishi dealership or aftermarket specialists for available options and compatibility.
Useful Link
View Full PDF: 2021 Mitsubishi Mirage G4 Owner’s Manual
2023 MITSUBISHI MIRAGE G4 Specs, Price, Features, Mileage (Brochure)