2022 Mitsubishi Outlander PHEV Wipers Operation Instructions
The wipers on the 2022 Mitsubishi Outlander PHEV are more than just a practical accessory; they are a vital component that guarantees visibility and safety while driving in a variety of weather conditions. These wipers are efficient and innovative, made to work in any weather conditions. Let’s explore the sophisticated technology and simple operation of the Outlander PHEV’s wipers, which guarantee a clear view ahead on every journey, no matter how the weather behaves.
Wiper and washer switch
CAUTION
- If the washer is used in cold weather, the washer fluid sprayed against the glass may freeze, which may hinder visibility. Warm the glass with the defroster before using the washer.
Windshield wipers
NOTE
- To ensure a clear rearward view, the rear window wiper will automatically perform several continuous operations if the selector lever is put in the “R” position while the windshield wipers are operating.
Refer to “Rear window wiper and washer” on page 5-203.
The windshield wipers can be operated with the operation mode is in ON or ACC.
If the blades are frozen to the windshield or rear window, do not operate the wipers until the ice has melted and the blades are freed, otherwise the wiper motor may be damaged.
MIST- Misting function
The wipers will operate once. OFF- Off
AUTO- Auto-wiper control
Rain sensor
The wipers will automatically operate depending on the degree of wetness on the windshield.
LO- Slow
HI- Fast
Rain sensor
Can only be used when the operation mode is in ON.
If the lever is put in the “AUTO” position, the rain sensor (A) will detect the extent of rain (or snow, other moisture, dust, etc.) and the wipers will operate automatically.
Keep the lever in the “OFF” position if the windshield is dirty and the weather is dry. Wiper operation under these conditions can scratch the windshield and damage the wipers.
CAUTION
- With the operation mode in ON and the lever in the “AUTO” position, the wipers may automatically operate in the situations described below.
- When cleaning the outside surface of the windshield, if you touch the rain sensor.
CAUTION
- When cleaning the outside surface of the windshield, if you wipe with a cloth the rain sensor.
- When using an automatic car wash.
- A physical shock is applied to the wind-shield.
A physical shock is applied to the rain sensor.
If your hands get trapped, you could suffer injuries or the wipers could malfunction. Be sure to put the operation mode in OFF, or move the lever to the “OFF” position to deactivate the rain sensor.
NOTE
- To protect the rubber parts of the wipers, this operation of the wipers does not take place even if the lever is put in the “AUTO” position when the vehicle is stationary and the ambient temperature is approximately 32 °F (0 °C) or lower.
- Do not cover the sensor by affixing a sticker or label to the windshield. Also, do not put any water-repellent coating on the wind-shield. The rain sensor would not be able to detect the extent of rain, and the wipers might stop working normally.
- In the following cases, the rain sensor may be malfunctioning. Have the vehicle checked at a certified Mitsubishi EV dealer.
NOTE
-
- When the wipers operate at a constant interval despite changes in the extent of rain.
- When the wipers do not operate even though it is raining.
- The wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor or when the windshield is frozen.
- Objects affixed to the windshield will stop the wipers when the wipers cannot remove them. To operate the wipers again, move the lever to the “LO” or “HI” position.
Also, the wipers may operate automatically due to strong direct sunlight or electromagnetic wave. To stop the wipers, move the lever to the “OFF” position
- Contact a certified Mitsubishi EV dealer when replacing the windshield glass.
To adjust the sensitivity of the rain sensor
With the lever in the “AUTO” (rain sensor) position, it is possible to adjust the sensitivity of the rain sensor by turning the knob (B).
“+”- Higher sensitivity to rain
“-”- Lower sensitivity to rain
NOTE
- Automatic wiper operation (rain sensitive) can be changed to intermittent operation, either vehicle speed sensitive or not vehicle speed sensitive.
For further information, please contact a cer-tified Mitsubishi EV dealer.
On vehicles equipped with the Smartphone-link Display Audio (SDA), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
Misting function
Move the lever in the direction of the arrow and release, to operate the wipers once. Use this function when you are driving in mist or drizzle.
The wipers will operate once if the lever is raised to the “MIST” position and released when the operation mode is in ON or ACC. The wipers will continue to operate while the lever is held in the “MIST” position.
The wipers will operate once if the lever is moved to the “AUTO” position and the knob (C) is turned in the “+” direction when the operation mode is in ON.
Windshield washer
The windshield washer can be operated with the operation mode in ON or ACC.
The washer fluid will be sprayed onto the windshield by pulling the lever toward you. When the wipers are not in operation or in intermittent operation, by pulling the lever toward you, the wipers will operate several times while the washer fluid is being sprayed.
NOTE
- It is possible to modify functions as follows:
- Intelligent washer can be activated.
Refer to “Intelligent washer - The wipers can be set to operate again after approximately 6 seconds.
These functions are not activated when the vehicle is shipped from the factory.
To activate or deactivate these functions, please contact a certified Mitsubishi EV dealer.
On vehicles equipped with the Smartphone-link Display Audio (SDA), screen operations can be used to make the adjustment.
Refer to the separate owner’s manual for details.
- Intelligent washer can be activated.
Intelligent washer
By releasing the lever soon after pulling it toward you, the washer fluid will be sprayed several times while the wipers are operating several times.
Intelligent washer will stop operating with any operation of the lever.
Rear window wiper and washer
The rear window wiper and washer can be operated when the operation mode is in ON or ACC.
Turn the knob to operate the rear window wiper.
OFF- Off
INT- The wiper operates continuously for several seconds then operates intermittently at intervals of approximately 8 seconds.
Washer fluid will be sprayed onto the rear window glass while the knob is turned fully in either direction. When the washer fluid is sprayed, the wiper will automatically operate 2 or 3 times.
NOTE
- The rear window wiper will automatically perform several continuous operations if the selector lever is put in the “R” position while the windshield wipers or the rear window wiper is operating.(automatic operation mode)
After the automatic operation, the rear window wiper will stop operating if the knob is in the “OFF” position. If the knob is in the “INT” position, the rear window wiper will return to the intermittent operation.
It is possible to set the rear window wiper to perform the automatic operation only if the selector lever is put in the “R” position while the rear window wiper is operating with the knob in the “INT” position.
See a certified Mitsubishi EV dealer for details. - If the knob is in the “OFF” position, turn the knob to the “INT” position twice quickly to operate the rear window wiper continuously.(continuous operation mode)
Turn the knob to the “OFF” position to stop the rear window wiper continuous operation. - The wiper intermittent operation time can be adjusted.
See a certified Mitsubishi EV dealer for details.
For vehicles equipped with the Smartphone-link Display Audio (SDA), adjustments can be made using screen operations. For further details, refer to the separate owner’s manual. The washer fluid reservoir is located in the engine compartment.
Check the fluid level regularly and refill if necessary.
Precautions to observe when using wipers and washers
CAUTION
- If the washer is used in cold weather, the washer fluid sprayed onto the glass might freeze, blocking your view. Heat the glass with the defroster before using the washer.
NOTE
- Do not use the wipers when the windshield is dry. This could scratch the glass and wear the wiper blades prematurely.
- Before using the wipers in cold weather, check to be sure that the wiper blades are not frozen to the windshield or rear window. Using the wipers while the blades are frozen could cause the wiper motor to burn out.
- If the moving wipers become blocked part-way through a sweep by ice or other deposits on the glass, the wipers may temporarily stop operating to prevent the motor from over-heating. In this case, park the vehicle in a safe place, put the operation mode in OFF, and then remove the ice or other deposits. Because the wipers will start operating again after the wiper motor cools down, check that the wipers operate before using them.
- Avoid using the washer for more than 20 seconds at a time. Do not operate the washer when the washer fluid reservoir is empty or the pump may fail.
- During cold weather, add a recommended washer solution that will not freeze in the washer fluid reservoir. Otherwise the washer may not work or may be damaged.
- Replace the wiper blades when they are worn. Use the proper size replacement blades. For further information, please con-tact a certified Mitsubishi EV dealer.
Wiper deicer switch (if so equipped)
The electric rear window defogger switch can be operated when the Plug-in Hybrid EV System is running.
When the front wipers have frozen to the windshield at the parked positions, turning on this switch will heat the windshield to make the wipers operable. Press the electric rear window defogger switch and the deicer will operate.
NOTE
- The wiper deicer is activated/deactivated, depending on the operation of the rear window defogger. Refer to “Electric rear window defogger switch”
FAQs
There are usually three wiper speed settings available on the Outlander PHEV: intermittent, low, and high.
Yes, in many models, the sensitivity of the automatic wipers can be changed to suit the amount of rainfall.
Sure, certain Outlander PHEV models have rain-sensing wipers that turn on on their own when they sense moisture.
The Outlander PHEV’s rear wiper, which is typically operated independently, works to maintain clear visibility through the rear windshield.
Indeed, the Outlander PHEV’s wipers frequently offer both automatic and manual settings, allowing for manual control when preferred.
High-quality, all-season windshield wiper blades made to function effectively in a variety of weather situations are standard equipment on Outlander PHEVs.
The windshield washer function is usually activated by pulling the wiper control lever towards you. This causes washer fluid to be sprayed onto the windshield while the wipers are in use.
Are the wipers heated in the Outlander PHEV?
For added protection against ice accumulation in colder weather, certain Outlander PHEV models may come equipped with heated wiper blades or a windshield defroster.
Controls on the wiper stalk can often be used to change the intermittent wipers’ interval.
Wipers don’t have a set maintenance schedule, but for best results, it’s advised to routinely check and replace worn-out wiper blades.
In the event that wiper blades are determined to have a manufacturing defect, they may be covered under the vehicle’s warranty. They are frequently regarded as wear-and-tear items, though.
With speed settings that can be adjusted to accommodate different intensities, the wiper system is built to withstand heavy rain or snowfall with efficiency.
It is possible to install aftermarket wiper blades that work with the Outlander PHEV. Make sure they fit the vehicle’s recommended size and specifications.
When the wipers are turned off after use, they frequently go back to their original or parked position.
The wipers’ ability to provide clear visibility is essential for safe driving, particularly in bad weather because it gives the driver an unhindered view.
Useful Link
View Full PDF :2022 Mitsubishi Outlander PHEV Owner’s Manual| Auto User Guide
2022 Mitsubishi Outlander PHEV Warning and Indicator Lights Instructions