2023 Mitsubishi Outlander PHEV Fuses and Fuse Box
The 2023 Mitsubishi Outlander PHEV has a high-tech electrical system that is meant to make the best use of its hybrid powertrain parts. The fuse box is an important part of this system that protects the vehicle’s electrical connections. In the 2023 Outlander PHEV, the fuse box is a safety hub that holds a variety of fuses that protect against electrical overloads or flaws. These fuses are placed in a way that keeps sensitive electrical parts from getting damaged and makes sure that many systems work smoothly, such as the charging system, battery, and electric motor. Mitsubishi carefully designed the fuse box, which shows that the company is dedicated to making sure that its plug-in hybrid cars are reliable and safe. This new design not only improves the Outlander PHEV’s total performance but also makes driving it smooth and trouble-free for people who care about the environment.
FUSES![2023 Mitsubishi Outlander PHEV-Fuses and Fuse Box-fig 1](https://www.autouserguide.com/wp-content/uploads/2023/12/2023-Mitsubishi-Outlander-PHEV-Fuses-and-Fuse-Box-fig-1.png)
ENGINE COMPARTMENT
WARNING
Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or electronic control units or cause a fire.
If any electrical equipment does not operate, check for an open fuse.
- Be sure the power switch and the headlight switch are turned off.
- Open the engine hood.
- Remove the fuse/fusible link box cover by using a suitable tool and pushing the tab.
- Locate the fuse that needs to be replaced.
- Remove the fuse using the fuse puller located in the passenger compartment fuse box.
- If the fuse is open, replace it with a new fuse.
- If a new fuse also opens, have the electrical system checked and repaired. It is recommended that you visit a certified Mitsubishi EV dealer for this service.
Fusible links
If any electrical equipment does not operate and the fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace them only with genuine Mitsubishi Motors parts.
For checking and replacing the fusible links, it is recommended you visit a certified Mitsubishi EV dealer.
PASSENGER COMPARTMENT
WARNING
Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or electronic control units or cause a fire.
If any electrical equipment does not operate, check for an open fuse.
- Be sure the power switch and the headlight switch are turned off.
- Remove the fuse box cover.
- Remove the fuse with the fuse puller.
- If the fuse is open, replace it with a new fuse.
- If a new fuse also opens, have the electrical system checked and repaired. It is recommended that you visit a certified Mitsubishi EV dealer for this service.
Extended storage fuse switch
To reduce battery drain, the extended storage fuse switch comes from the factory switched off. Before delivery of your vehicle, the switch is pushed in (switched on) and should always remain on.
If the extended storage fuse switch is not pushed in (switched on), the meter may display a warning message. See “12. Shipping Mode On Push Storage Fuse warning
If any electrical equipment does not operate, remove the extended storage fuse switch and check for an open fuse.
NOTE:
If the extended storage fuse switch malfunctions or if the fuse is open, it is not necessary to replace the switch. In this case, remove the extended storage fuse switch and replace it with a new fuse of the same rating.
How to remove the extended storage fuse switch:
- To remove the extended storage fuse switch, be sure the power switch is in the OFF or LOCK position.
- Be sure the headlight switch is in the OFF position.
- Remove the fuse box cover.
- Pinch and pull out the extended storage fuse switch.
- Pull the extended storage fuse switch straight out from the fuse box.
FAQs
The 2023 Mitsubishi Outlander PHEV has a total of 15 fuses.
The fuse box in the 2023 Mitsubishi Outlander PHEV is typically located in the engine compartment or under the dashboard.
Fuses protect electrical components by breaking the circuit in the event of a power surge or electrical fault, preventing damage to the vehicle’s electrical system.
The specific fuse that controls the power windows can be identified by referring to the vehicle’s owner’s manual or the fuse box cover.
Locate the faulty fuse in the fuse box, and replace it with a fuse of the same rating.
Typically, only a pair of needle-nose pliers or a fuse puller is required to remove and replace fuses.
Some vehicles may come with spare fuses stored in the fuse box, but it’s advisable to keep a set of spare fuses of various amperages in the vehicle.
Yes, using a higher amperage fuse can result in damage to electrical components and may pose a fire hazard. Always use the correct amperage fuse.
Regularly check fuses during routine maintenance or when troubleshooting electrical issues. Inspect them more frequently if experiencing electrical problems.
The specific fuse for the headlights can be identified by checking the labeling on the fuse box cover.
Always disconnect the vehicle’s battery before working on the fuse box to ensure safety.
A: Yes, a fuse can fail without visible signs. In such cases, a multimeter may be used to test the continuity of the fuse.
Replacement fuse box covers can usually be obtained through Mitsubishi dealerships or authorized parts distributors. Contacting the manufacturer’s customer service may also be an option.
The 2023 Mitsubishi Outlander PHEV has two fuse boxes.
The main fuse box contains fuses that protect various electrical components in the vehicle, such as lights, engine components, and accessories.
Useful Link
View Full PDF: 2023 Mitsubishi Outlander PHEV Owners Manual | Auto User Guide
2023 Mitsubishi Outlander PHEV Engine Oil and Fluids Instructions