Dashboard Lights Meanings: 2018 Mitsubishi L200 Guide
Driving the 2018 Mitsubishi L200 is tough and flexible, and it’s the perfect example of how rugged power and modern comfort can work together. The lights on the panel are easy to read and give the driver important information. Each sign shows Mitsubishi’s dedication to driver safety and vehicle performance. For example, the dynamic stability control light makes sure the car has the best traction and stability on a variety of terrains, and the tyre pressure monitoring system light makes sure the tyres work safely and efficiently. The L200 is also very reliable and takes preventative maintenance very seriously, as shown by features like the engine warning light that shows possible problems that need instant attention.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Indication and warning lamps (multi-information display)
- Front fog lamp indication lamp*
- Turn-signal indication lamps/Hazard warning indication lamps
- High-beam indication lamp
- Auto Stop & Go (AS&G) indication lamp
- Lane departure warning (LDW) standby indication lamp (green)
- Lane departure warning (LDW) lamp (amber)
- Position lamp indication lamp*Lane departure warning (LDW) system ON indication lamp*
- Rear fog lamp indication lamp
- Cruise control indication lamp*
- Diesel particulate filter (DPF) warning lamp
- Diesel preheat indication lamp
- Charge warning lamp
- Check the engine warning lamp
- Fuel filter indication lamp.
- A/T (automatic transmission) fluid temperature warning lamp (vehicles with A/T)
- Oil pressure warning lamp
- Auto Stop & Go (AS&G) OFF indication lamp
- Washer fluid level warning lamp
- Multi-information display
- For details, refer to “Warning activation”.
- For details, refer to “Warning activation”
- Door ajar warning lamp
- Seat belt reminder/warning lamp
- Anti-lock brake system (ABS) warning lamp
- Active Stability & Traction Control (ASTC) indication lamp
- Active Stability & Traction Control (ASTC) OFF indication lamp
- Supplement Restraint System (SRS) warning lamp
- Brake warning lamp
- Rear differential lock indication lamp
- 2WD/4WD operation indication lamp
- Low-range indication lamp
- 2WD/4WD operation indication lamp
- Low-range indication lamp
2018 Mitsubishi L200 Indication lamps
Turn-signal indication lamps/Hazard warning indication lamps 
These indication lamps blink in the following situations.
- When the turn-signal lever is moved to activate a turn-signal lamp.
- When the hazard warning flasher switch is pressed to activate the hazard warning lamps.
- When the hazard warning lamps automatically activate due to sudden braking while driving.
High-beam indication lamp 
This indication lamp illuminates when the high beam is used.
Front fog lamp indication lamp* 
This lamp illuminates while the front fog lamps are on.
Rear fog lamp indication lamp 
This lamp illuminates while the rear fog lamp is on.
Position lamp indication lamp* 
This indication lamp illuminates while the position lamps are on.
Diesel preheats indication lamp
This indicates the glow plug preheat condition. [Except for vehicles equipped with a keyless operation system] When the ignition switch is turned to the “ON” position, the lamp illuminates. As the glow plug becomes hot, the lamp goes out and the engine can be started.[For vehicles equipped with keyless opera-tion system] When the operation mode is put in ON, the lamp illuminates and preheating of the glow plug starts automatically. As the glow plug becomes hot, the lamp goes out and the engine starts.
CAUTION
- If the diesel preheat indication lamp comes on after the engine is started, the engine speed may not rise above the idling speed because of fuel freezing. In this case, keep the engine idling for about 10 minutes, then turn off the ignition switch or put it in OFF operation mode, and immediately turn it on or put in ON again to confirm that the diesel preheat indication lamp is off.
NOTE
- If the engine is cold, the diesel preheat indication lamp is on for a longer time.
- [Except for vehicles equipped with a keyless operation system] When the engine has not been started within about 5 seconds after the diesel preheat indication lamp went out, return the ignition switch to the “LOCK” position. Then, turn the ignition switch to the “ON” position to preheat the engine again.
- When the engine is warm, the diesel preheat indication lamp does not come on even if the ignition switch is placed in the “ON” posi-tion or the operation mode is in ON.
Fuel filter indication lamp
This indication lamp illuminates when the ignition switch is turned to the “ON” position or the operation mode is put in ON, and goes off after the engine has started. If it lights up while the engine is running, it indicates that water has accumulated inside the fuel filter; if this happens, take action as follows. Remove the water from the fuel filter. When the lamp goes out, you can resume driving. If it either does not go out or comes on from time to time, we recommend you have the vehicle inspected.
Warning lamps 2018 Mitsubishi L200 Owner’s Manual
Brake warning lamp 
This lamp illuminates when the ignition switch is turned to the “ON” position or the operation mode is put in ON, and goes off after a few seconds. Always make sure that the lamp goes off be-fore driving. With the ignition switch or the operation mode in ON, the brake warning lamp illuminates under the following conditions:
- When the parking brake lever has been engaged.
- When the brake fluid level in the reservoir falls to a low level.
- When the brake force distribution func-tion is not operating correctly.
With the ignition switch or the operation mode in ON, a buzzer sounds under the following conditions:
- The vehicle speed exceeds 8 km/h (5 mph) with the parking brake applied.
CAUTION
- In the situations listed below, brake performance may be compromised or the vehicle may become unstable if brakes are applied suddenly; consequently, avoid driving at high speeds or applying the brakes suddenly. Furthermore, the vehicle should be brought to a stop in a safe location and to have it checked.
- The brake warning lamp does not illuminate when the parking brake is applied or does not turn off when the parking brake is released.
- The ABS warning lamp and brake warning lamp illuminate at the same time.
- The brake warning lamp remains illuminated during driving.
- The vehicle should be brought to a halt in the following manner when brake performance has deteriorated.
- Depress the brake pedal harder than usual. Even if the brake pedal moves down to the very end of its possible stroke, keep it pressed down hard.
- Should the brakes fail, use engine braking to reduce your speed and pull the parking brake lever. Depress the brake pedal to operate the stop lamp to alert the vehicles behind you.
Check engine warning lamp
This lamp is part of an on-board diagnostic system that monitors the emissions, engine control system or A/T control system. If a problem is detected in one of these systems, this lamp illuminates or flashes. Although your vehicle will usually be drivable and not need towing, we recommend you have the system checked as soon as possible. This lamp will also illuminate when the ignition switch is turned “ON” or the operation mode is put in ON, and goes off after the engine has started. If it does not go off after the engine has started, we recommend you have the vehicle checked.
CAUTION
- Prolonged driving with this lamp on may cause further damage to the emission control system. It could also affect fuel economy and drivability.
- If the lamp does not illuminate when the ignition switch is turned to the “ON” position or the operation mode is put in ON, we recommend you have the system checked.
CAUTION
- If the lamp illuminates while the engine is running, avoid driving at high speeds and have the system inspected by an MITSUBISHI MOTORS Authorized Service Point as soon as possible. Accelerator pedal and brake pedal response may be negatively influenced under these conditions.
NOTE
- The engine electronic control module accommodating the onboard diagnostic system has various fault data (especially about the exhaust emission) stored.
This data will be erased if a battery cable is disconnected which will make a rapid diagnosis difficult. Do not disconnect a battery cable when the check engine warning lamp is ON.
Charge warning lamp 
This lamp illuminates when the ignition switch is turned to the “ON” position or the operation mode is put in ON, and goes off after the engine has started.
CAUTION
- If it illuminates while the engine is running, there is a problem in the charging system. Immediately park your vehicle in a safe place and we recommend you to have it checked.
Oil pressure warning lamp 
This lamp illuminates when the ignition switch is turned to the “ON” position or the operation mode is put in ON, and the lamp goes off after the engine has started. If it illuminates while the engine is running, the oil pressure is too low. If the warning lamp illuminates while the engine is running, turn the engine off and have it inspected.
CAUTION
- If this lamp illuminates when the engine oil level is not low, have it inspected?
- This warning lamp does not indicate the amount of oil in the crankcase. This must be determined by checking the oil level on the dipstick, while the engine is switched off.
- If you continue driving with a low engine oil level or with this warning lamp illuminated, engine seizure may occur.
NOTE
- The oil pressure warning lamp should not be treated as an indication of the engine’s oil level. The oil level must be checked using the dipstick.
Door ajar warning lamp 
This lamp illuminates when a door is either open or not completely closed. If the vehicle speed reaches approximately 8 km/h (5 mph) with a door open or incompletely closed, a buzzer sounds 4 times as a warning.
CAUTION
Before moving your vehicle, check that the warning lamp is OFF.
Washer fluid level warning lamp 
This lamp comes on when the washer fluid is running low. If the lamp comes on, replenish the container with washer fluid.
FAQs
A 2018 Mitsubishi L200’s check engine light usually means there is a problem with the engine or pollution system.
In a 2018 Mitsubishi L200, the ABS warning light means that there are problems with the Anti-lock Braking System, which could mean that there are problems with the brake system.
The oil pressure warning light on a 2018 Mitsubishi L200 means that the oil pressure is low, which could damage the engine if it is not fixed right away.
A 2018 Mitsubishi L200’s battery light turns on when there is a problem with the charging system, like a battery or generator that isn’t working right.
If the airbag warning light comes on in a 2018 Mitsubishi L200, it means that there may be a problem with the airbag system that needs to be fixed right away for safety reasons.
The TPMS light on a 2018 Mitsubishi L200 means that the tyres need to be inflated to make them safe to drive on.
The TCS light on a 2018 Mitsubishi L200 means there is a problem with the traction control system, which could make the car less stable on the road.
The light on a 2018 Mitsubishi L200’s coolant temperature warns of overheating, which needs quick attention to keep the engine from damage.
The 2018 Mitsubishi L200’s fuel warning light means that the fuel level is low, reminding the user to refuel so that the car doesn’t run out of gas.
In a 2018 Mitsubishi L200, the seatbelt warning light tells people to buckle up for safety while they drive.
In a 2018 Mitsubishi L200, the power steering warning light means that there might be a problem with the power steering system that needs to be looked at and possibly fixed.
The washer fluid warning light on a 2018 Mitsubishi L200 tells the driver that the windshield washer fluid level is low and needs to be refilled to keep the vision.
The immobilizer system warning light on a 2018 Mitsubishi L200 means that there is a problem with the anti-theft system that needs to be looked into and possibly fixed.
A 2018 Mitsubishi L200’s brake system warning light turns on when there is a problem with the braking system that needs to be fixed right away for safety reasons.
If the exhaust emission warning light comes on in a 2018 Mitsubishi L200, it means there is a problem with the vehicle’s emissions control system that needs to be inspected and fixed to make sure it meets environmental standards.
Useful Links
View Full PDF: 2018 Mitsubishi L200 Owner’s Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Display Setting Guide: 2018 Mitsubishi L200 Cluster Explained