How to fix a blown fuse: 2018 Mitsubishi L200 Fuse Diagrams Guide
A blown fuse can be the proverbial “wrencher in the works” in the complex network of automotive systems, interfering with the smooth operation of your car. Understanding the fuse diagrams becomes crucial while navigating the maze of electrical components, with an emphasis on the 2018 Mitsubishi L200. These schematics provide light on the complex web of circuits that power different parts of your car and provide as a guide for identifying and analyzing the cause of a blown fuse. This article seeks to simplify the process of locating, changing, and eventually repairing a blown fuse in your 2018 Mitsubishi L200 as we delve into the intricate details of the fuse box. Get ready for an adventure through the fuse diagrams, which will reveal the mysteries hidden beneath the hood and give you the tools you need to keep your L200 operating smoothly while you’re on the road, whether you’re an experienced do-it-yourselfer or a beginner hoping to improve your automotive troubleshooting skills.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
2018 Mitsubishi L200 Fuse block location Owner’s Manual
To prevent damage to the electrical system from short-circuiting or overloading, each individual circuit is equipped with a fuse. The fuse blocks are located in the passenger compartment and in the engine compartment.
Passenger compartment (LHD vehicles)
The fuse block in the passenger compartment is located behind the fuse lid in front of the driver’s seat at the position shown in the illustration.
Pull the fuse lid to remove it.
Passenger compartment (RHD vehicles)
The fuse block in the passenger compartment is located behind the glove box at the position shown in the illustration.
-
Open the glove box.
-
Move the rod (A) on the right side of the glove box to the right side of the box.
- While pressing the side of the glove box, unhook the left and right hooks (B) and lower the glove box.
- Remove the glove box fastener (C), and then remove the glove box.
Engine compartment of Mitsubishi L200 2018
In the engine compartment, the fuse block is located as shown in the illustration.
Fuse load capacities
The fuse capacity and the names of electrical systems protected by the fuses are indicated on the inside of the fuse lid (LHD vehicles), the back side of the glove box (RHD vehicles) and inside of the fuse block cover (inside of the engine compartment).
NOTE
- Spare fuses are provided in the fuse block of the engine compartment. Always use a fuse of the same capacity for replacement.
Passenger compartment fuse location table
Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
Engine compartment fuse location table
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
The fuse block does not contain spare 7.5 A, 10 A or 15 A fuses. If one of these fuses burns out, substitute with the following fuse. 7.5 A: Outside rear-view mirrors
10 A: Option
15 A: Cigarette lighter
When using a substitute fuse, replace it with a fuse of the correct capacity as soon as possi-ble.
Identification of fuse
Fuse replacement
- Before replacing a fuse, always turn off the electrical circuit concerned and place the ignition switch in the “LOCK” position or put the operation mode in OFF.
- Remove the fuse puller (A) from the inside of the fuse box in the engine compartment.
- Referring to the fuse load capacity table, check the fuse about the problem.
B- The fuse is OK
C- Blown fuse
NOTE
If any system does not function but the fuse corresponding to that system is normal, there may be a fault in the system elsewhere. We recommend you to have your vehicle checked. - Insert a new fuse of the same capacity by using the fuse puller into the same place at the fuse block.
CAUTION
- If the newly inserted fuse blows again after a short time, we recommend you have the electrical system checked to find the cause and rectify it.
- Never use a fuse with a larger capacity than specified or a substitute (such as a cable or foil). Doing so could cause the circuit wires to overheat and create a fire.
How to Replace the fuses of the 2018 Mitsubishi L200
- Where is the Fuse Box
- The fuse box is typically located in the engine compartment, though it could alternatively be situated inside, close to the driver’s side.
- Turn Off the Ignition
- Make sure the ignition is off when working on the fuses to avoid any electrical dangers.
- Identify the Blown Fuse
- To determine which exact fuse is connected to the faulty component, examine the fuse.
- Assemble Required Equipment
- To securely remove the blown fuse, you might need to use pliers or a fuse puller. Having a flashlight around can help with visibility
- Remove the Blown Fuse
- Gently grip the blown fuse and pull it straight out with the fuse remover or pliers. Take caution not to harm the fuse box or the nearby fuses.
- Inspect the Fuse
- Check for a clearly broken filament on the blown fuse. If you’re not sure if the fuse is bad, use a multimeter to measure continuity.
- Select a Replacement Fuse
- To find out the correct amperage for the replacement fuse, go to the fuse diagram. Using the incorrect amperage fuse can cause more problems.
- Insert the Replacement Fuse
- Make sure the replacement fuse fits snuggly into the vacant slot. Press it firmly to make sure it stays in place.
- Double-Check Connections
- Verify that there are no loose connections and that the replacement fuse is seated firmly.
- Close the Fuse Box
- If necessary, close the cover of the fuse box located inside the engine compartment.
- Turn on the Ignition
- Restart the ignition and make sure the part that goes with the new fuse is operating correctly.
- How to Get Rid of a Blown Fuse
- Carefully dispose of the blown fuse and, if needed, save extra fuses in your toolbox for later use.
FAQs
Locate any fuses that appear to be broken or otherwise damaged in the fuse box.
Usually, you can find the fuse box either under the dashboard or in the engine compartment.
Take a pair of needle-nose pliers or a fuse remover and carefully remove the blown fuse.
The correct type and rating of new fuses, as well as a fuse puller or pair of pliers, are required for the task at hand.
You can find a schematic with the amperage ratings in the owner’s manual or on the cover of the fuse box.
No, you risk damaging your electrical system if you use a fuse with a larger amperage. Pick the one that comes highly recommended.
Talk to a competent mechanic to find out what’s wrong and fix it, because there might be an electrical problem at the root.
If you want to be safe around electricity, turn off the engine before you change the fuses.
Check the fuses regularly and replace broken ones. You should examine it during routine maintenance, although there is no set interval.
You can find out which fuses control which systems—like the lights, radio, and power windows— by looking at the fuse box diagram.
It is possible to check the status of a fuse using a multimeter in continuity mode.
Use the right accessories, don’t overload circuits, and fix electrical problems right away.
Useful Links
View Full PDF: 2018 Mitsubishi L200 Owner’s Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)