Fuse Diagrams and Relay Guide: 2019 Mitsubishi Eclipse Cross Repair Fuses
Both owners and techs of modern cars like the 2019 Mitsubishi Eclipse Cross need to understand how fuse diagrams and relay systems work. Fuses are very important safety features because they keep electrical lines from being overloaded, which could damage them or start a fire. Because automobile electrical systems are so complicated, they need detailed fuse diagrams that show how power is sent to different parts of the car. Relays are also very important for controlling high-current circuits because they act as switches that let power flow or stop it depending on certain situations. The Eclipse Cross’s electrical system is held together by this complex web of fuses and switches, which guarantees top performance, safety, and dependability.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Fuses
Fuse block location
To prevent damage to the electrical system from short-circuiting or overloading, each circuit is equipped with a fuse. The fuse blocks are located in the passenger compartment and in the engine compartment.
Passenger compartment
The fuse block in the passenger compartment is located behind the fuse lid in front of the driver’s seat at the position shown in the illustration.
Pull the fuse lid to remove it.
A– Fuse block
Engine compartment
The fuse block in the engine compartment is located as shown in the illustration.
Press the lock lever (1) and remove the fuse block cover (2).
Fuse load capacities
This fuse list shows the names of the electrical systems and their fuse capacities.
There are spare fuses in the fuse block cover in the engine compartment. Always replace a blown fuse with one of the same capacity as the original.
Passenger compartment fuse location table
Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
Engine compartment fuse location table
Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
The fuse block does not contain spare 7.5 A, 25 A or 30 A fuses. If one of these fuses burns out, substitute with the following fuse. 7.5 A: 10 A spare fuse
25 A: 20 A spare fuse
30 A: 30 A audio system amplifier fuse When using a substitute fuse, replace it with a fuse of the correct capacity as soon as possible.
Identification of fuse
|
Capacity |
Colour |
|
7.5 A |
Brown |
|
10 A |
Red |
|
15 A |
Blue |
|
20 A |
Yellow |
|
25 A |
Natural (white) |
|
30 A |
Green (fuse type) / Pink (fusible link type) |
|
40 A |
Green (fusible link type) |
Fuse replacement
- Before replacing a fuse, always turn off the electrical item connected to the fuse and turn the ignition switch to the “OFF” position or put the operation mode in OFF.
- There is a fuse remover (A) in the engine compartment fuse block.
- Clamp it on the fuse you wish to remove, and pull the fuse straight out from the fuse block.
- Use the fuse location diagrams and the matching tables, to check the fuse that is related to the problem. If the fuse is not blown, something else must be causing the problem. Have the system inspected by your authorized Mitsubishi Motors dealer or a repair facility of your choice.
B– The fuse is OK
C- Blown fuse - Insert a new fuse of the same capacity securely into the appropriate slot.
CAUTION
- Never use a fuse with a capacity greater than the one listed or any substitute, such as wire, foil etc. This would cause the circuit wiring to heat up and could cause a fire.
- If the replacement fuse blows again after a short time, have the electrical system checked by an authorized Mitsubishi Motors dealer or a repair facility of your choice to find and correct the cause.
How to replace a 2019 Mitsubishi Eclipse fuse
- Locate the Fuse Box:
- The fuse box in a Mitsubishi Eclipse is typically located under the dashboard on the driver’s side. It may also be located in the engine compartment.
- Disconnect the Battery:
-
- For safety, it’s recommended to disconnect the battery before replacing any fuses to avoid electrical shorts.
-
- Remove the Blown Fuse:
- Use a fuse puller tool or a pair of needle-nose pliers to carefully pull out the blown fuse. Make sure to grip the fuse firmly but gently to avoid damaging it or any surrounding components.
- Install the New Fuse
- Insert the new fuse into the slot that held the blown fuse. Make sure it’s securely seated.
- Reconnect the Battery:
- Once you’ve replaced the fuse, reconnect the battery.
- Test the Component:
- Turn on the ignition and test the component associated with the fuse you replaced to ensure it’s functioning properly.
- Replace the Fuse Box Cover:
- If you removed the fuse box cover, make sure to put it back in place securely.
- Dispose of the Old Fuse:
- Safely dispose of the blown fuse. If you’re unsure how to do this, check your local regulations for proper disposal methods.
FAQs
The fuse diagram shows where each fuse is located and what it does, which helps you figure out what’s wrong with your electricity.
You can tell if a fuse has blown by looking at the fuse element or using a voltmeter to check for continuity in your 2019 Mitsubishi Eclipse Cross.
Electrical overloads, short circuits, or broken parts are common reasons why fuses blow in the 2019 Mitsubishi Eclipse Cross.
It’s not a good idea to change a fuse in a 2019 Mitsubishi Eclipse Cross that has a higher amp value because it could damage the electrical system.
The fuses in your 2019 Mitsubishi Eclipse Cross should be checked regularly as part of regular maintenance to make sure the electricity works right.
Fuse pullers or needle nose pliers are all you need to change fuses in a 2019 Mitsubishi Eclipse Cross.
The fuse box in the 2019 Mitsubishi Eclipse Cross is usually in the engine bay or on the kick panel on the driver’s side.
The fuse box in the 2019 Mitsubishi Eclipse Cross can be reached in several ways, but most of the time, you have to remove a cover or panel.
For compatibility and dependability, it’s best to use original or OEM fuses in your 2019 Mitsubishi Eclipse Cross.
To keep the 2019 Mitsubishi Eclipse Cross safe, the battery must be disconnected before the fuses can be replaced.
The 2019 Mitsubishi Eclipse Cross’s fuse diagram marks each fuse with the name of the part it controls, which makes it easier to find.
Relays in the 2019 Mitsubishi Eclipse Cross protect sensitive computer parts and make them last longer by controlling high-current circuits.
A voltmeter can be used to test the relays in a 2019 Mitsubishi Eclipse Cross to make sure they work properly and have continuity.
You can briefly get around a broken relay, but it’s not a good idea because it could make the 2019 Mitsubishi Eclipse Cross’s electrical system less safe and less useful.
Useful Links
View Full PDF: 2019 Mitsubishi Eclipse Cross Owner’s Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Warning Lights: 2019 Mitsubishi Eclipse Cross Dashboard Guide