Replacing Fuses: 2019 Mitsubishi L200 Fuse Diagram and Relay Guide
Fuse arrangement is very important to understand when it comes to the 2019 Mitsubishi L200. Fuses are the silent protectors of electrical systems in the complex web of automotive functionality. The fuse box protects the car’s electrical system from possible malfunctions by acting as a command center amidst the maze-like network of wires and circuits. Each fuse acts as a watchful gatekeeper, capable of averting electrical mayhem and guaranteeing the uninterrupted performance of vital operations. Through an examination of the 2019 Mitsubishi L200’s fuses and fuse box diagram, we hope to shed light on the intricate workings of this tough car and clarify the sometimes confusing but vital field of automotive electronics.
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)
Fuse block location
To prevent damage to the electrical system from short-circuiting or overloading, each individual circuit is equipped with a fuse. The fuse blocks are located in the passenger compartment and in the engine compartment.
Passenger compartment (LHD
vehicles)
The fuse block in the passenger compartment is located behind the fuse lid in front of the driver’s seat at the position shown in the illustration.
Pull the fuse lid to remove it.
Passenger compartment (RHD vehicles)
The fuse block in the passenger compartment is located behind the glove box at the position shown in the illustration.
-
Open the glove box.
-
Move the rod (A) on the right side of the glove box to the right side of the box. (if so equipped)
- While pressing the side of the glove box, unhook the left and right hooks (B) and lower the glove box.
- Remove the glove box fastener (C), and then remove the glove box.
2019 Mitsubishi L200 Engine compartment Owner’s Manual
In the engine compartment, the fuse block is located as shown in the illustration.
Fuse load capacities
The fuse capacity and the names of electrical systems protected by the fuses are indicated on the inside of the fuse lid (LHD vehicles), the back side of the glove box (RHD vehicles) and inside of the fuse block cover (inside of the engine compartment).
NOTE
- Spare fuses are provided in the fuse block of the engine compartment. Always use a fuse of the same capacity for replacement.
Passenger compartment fuse location table
Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
Engine compartment fuse location table User Manual
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
The fuse block does not contain spare 7.5 A, 10 A or 15 A fuses. If one of these fuses burns out, substitute with the following fuse. 7.5 A: Outside rear-view mirrors
10 A: Option
15 A: Cigarette lighter
When using a substitute fuse, replace it with a fuse of the correct capacity as soon as possi-ble.
Identification of fuse
Fuse replacement
- Before replacing a fuse, always turn off the electrical circuit concerned and place the ignition switch in the “LOCK” position or put the operation mode in OFF.
- Remove the fuse puller (A) from the inside of the fuse box in the engine compartment.
- Referring to the fuse load capacity table, check the fuse about the problem.
B- The fuse is OK
C- Blown fuse
NOTE
If any system does not function but the fuse corresponding to that system is normal, there may be a fault in the system elsewhere. We recommend you to have your vehicle checked. - Insert a new fuse of the same capacity by using the fuse puller into the same place at the fuse block.
CAUTION
- If the newly inserted fuse blows again after a short time, we recommend you have the electrical system checked to find the cause and rectify it.
- Never use a fuse with a larger capacity than specified or a substitute (such as a cable or foil). Doing so could cause the circuit wires to overheat and create a fire.
How to replace the Fuse in the 2019 Mitsubishi L200
Your 2019 Mitsubishi L200’s fuse box is easy to access and replace. In this detailed tutorial, we will:
Remember to turn off the engine and take the key from the ignition before you start.
- Find the Power Switch
- It is common practice to find the Mitsubishi L200’s fuse box in the engine bay. Find a black box with a detachable cover under the hood and open it.
- Locate the Cover of the Fuse Box
- Typically, you can find a schematic on the cover of the fuse box that shows where the fuses are and what they do
- Find the Bad Fuse
- Find the fuse that goes with the malfunctioning part. I think you may find the answer to this question on the cover of the fuse box.
- Use a Fuse Puller or Needle-Nose Pliers
- A fuse puller is often included with most fuse boxes, but you can also use pliers. With the help of the tools, gently remove the defective fuse.
- Inspect the Fuse
- Make sure the fuse isn’t damaged in any way. It is probable that the fuse has blown and requires replacement if either the metal strip within the fuse is damaged or the fuse looks discolored.
- Pick a New Fuse
- Pick a new fuse with the same amperage rating as the old one. On most metal fuse ends, you’ll see the amperage rating. If you want to keep electrical problems at bay, you must use fuses with the right rating.
- Insert the New Fuse
- Gently place the new fuse into the slot that was previously used for the old one. Ensure a snug fit.
- Replace the Fuse Box lid
- After you’ve changed the bad fuse, return the lid to the fuse box and make sure it’s securely fastened.
- Make Sure the Part Is Working Properly
- Start the car and check if the part linked to the fuse has taken effect.
FAQs
The 2019 Mitsubishi L200’s fuse box is situated on the driver’s side beneath the dashboard.
The 2019 Mitsubishi L200 headlight fuse is labeled and found in fuse box position 15.
Open the driver’s side door of the 2019 Mitsubishi L200 and look for the panel on the side of the dashboard to access the fuse box.
The 2019 Mitsubishi L200’s radio fuse is a 15-amp fuse that can be found in fuse box position 22.
The 2019 Mitsubishi L200 does indeed come with extra fuses. They are usually located in a designated slot in the fuse box.
A break in the metal strip inside the fuse indicates a blown fuse in a 2019 Mitsubishi L200. Look for any discolouration or obvious gaps.*
The 2019 Mitsubishi L200 air conditioning system fuse is normally located in the fuse box and is labeled. See the diagram for more information.
The 2019 Mitsubishi L200’s fuse panel is not interchangeable. To prevent electrical problems, always replace a blown fuse with one of the same amperage.
It could be necessary to use a fuse puller or a pair of needle-nose pliers to change a fuse in a 2019 Mitsubishi L200.
Check the fuses in your 2019 Mitsubishi L200 regularly, particularly if you have electrical problems. Quickly replace any blown fuses.
Aftermarket fuses could not be as high quality and could cause electrical issues.
To ensure safety and prevent electrical shock, disconnect the battery in the 2019 Mitsubishi L200 before replacing any fuses.
Yes, the 2019 Mitsubishi L200 has a dedicated fuse for the horn. To find out the precise location and amperage, consult the fuse box diagram.
Auto parts stores or authorized Mitsubishi dealerships carry replacement fuses for the 2019 Mitsubishi L200. Make sure they are the same amperage as needed.
Useful Links
View Full PDF: 2019 Mitsubishi L200 Owner’s Manual| Auto User Guide
2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)