Upgrading Your Fuse Box: 2020 Mitsubishi L200 Fuse Diagram Guide
A vital first step in guaranteeing the effectiveness and safety of your car’s electrical system is upgrading your fuse box. The 2020 Mitsubishi L200 Fuse Diagram offers a thorough explanation for identifying and controlling the fuses in your car. You can simply detect and repair blown fuses by becoming familiar with this schematic, which will help you avoid any future electrical problems. The purpose of this graphic is to make troubleshooting electrical issues easier for you, saving you time and money on repairs. The fuse diagram gives you the power to take charge of the electrical parts of your car with its clear labelling and comprehensive information. Make use of this helpful resource to keep your Mitsubishi L200 in peak condition and stay ahead of any problems. Take use of the 2020 Mitsubishi L200 Fuse Diagram to improve your fuse box experience right now! 2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)Fuses
Fuse block location
To prevent damage to the electrical system due to short-circuiting or overloading, each circuit is provided with a fuse. There are fuse blocks in the passenger compartment and in the engine compartment. Passenger compartment (LHD vehicles) The fuse blocks in the passenger compartment are located behind the fuse lid in front of the driver’s seat at the position shown in the illustration. Pull the fuse lid to remove it.
Passenger compartment (RHD vehicles)
The fuse block in the passenger compartment is located behind the glove box at the posi-tion shown in the illustration.
- Open the glove box.
- Move the rod (A) on the right side of the glove box to the right side of the box.
- While pressing the side of the glove box, unhook the left and right hooks (B) and lower the glove box.
Engine compartment
In the engine compartment, the fuse block is located as shown in the illustration.
- Push the tab.
- Remove the cover.
- Spare fuses are provided in the fuse block of the engine compartment. Always use a fuse of the same capacity for replacement.
- Fusible link
- Fusible link
- Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equip-ment corresponding to each fuse.
- Fusible link
- Fusible link
- Fusible link
- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.
|
Capacity |
Colour |
| 7.5 A | Brown |
| 10 A | Red |
| 15 A | Blue |
| 20 A | Yellow |
| 30 A | Green (fuse type) / Pink (fusible link type) |
| 40 A | Green (fusible link type) |
Fuse replacement
- Before replacing a fuse, always turn off the electrical circuit concerned and place the ignition switch in the “LOCK” position or put the operation mode in OFF.
- Remove the fuse puller (A) from the inside of the fuse box in the engine compartment.
- Referring to the fuse load capacity table, check the fuse about the problem.
B- The fuse is OK
C- Blown fuse
NOTE
If any system does not function but the fuse corresponding to that system is normal, there may be a fault in the system elsewhere. We recommend you to have your vehicle checked. - Insert a new fuse of the same capacity by using the fuse puller into the same place at the fuse block.
CAUTION
- If the newly inserted fuse blows again after a short time, we recommend you have the electrical system checked to find the cause and rectify it.
- Never use a fuse with a larger capacity than specified or a substitute (such as a cable or foil). Doing so could cause the circuit wires to overheat and create a fire.
How to replace a fuse in 2020 Mitsubishi L200
- Find the fuse box.
- In a Mitsubishi L200, the fuse box is usually in the engine area or under the dashboard on the driver’s side.
- Find the Blown Fuse
- Fuses generally have numbers or symbols on them that show how many amps they can handle and what they control.
- Turn Off the Vehicle
- To avoid an electrical accident, make sure the car is off and the key is out of the ignition.
- Take out the blown fuse
- Carefully pull the fuse out of its hole with a fuse puller tool or a pair of needle-nose pliers. Be careful not to hurt the fuse or the box that holds the fuse.
- Step 5
- Put in the New Fuse. Find a new fuse with the same amperage rating as the blown one and put it in the fuse box’s empty spot. Make sure it’s sitting down firmly.
- Test the Component:
- With the engine running, test the part that wasn’t working to make sure it now does. If the new fuse blows right away or the problem keeps happening, there may be a bigger electrical problem that needs to be fixed by an expert.
- Securely Close the Fuse Box Cover
- Once you’re sure the new fuse is working, close the fuse box cover.
- Get Rid of the Old Fuse:
- Get rid of the blown fuse in a safe way. It’s important not to use a blown fuse again because it could hurt the network even more.
FAQs
A fuse is a safety device that keeps electrical systems from getting damaged by too much current. Most of the time, the 2020 Mitsubishi L200’s switch box is in the engine bay or under the dashboard.
A broken wire inside the fuse is normally a sign that the fuse has blown. It’s also possible for the metal strip inside the fuse to melt or come loose.
To safely take out and put in a fuse in a 2020 Mitsubishi L200, you will only need a pair of needle-nose pliers or a fuse puller tool.
Short circuits, overloaded electrical circuits, and broken parts in the vehicle’s electrical system are all common causes.
No, you shouldn’t do that. Using a fuse with a higher amp rating could damage the car’s electrical system or even start a fire. If you need to change a fuse, always use one with the same amp rating.
The 2020 Mitsubishi L200’s fuse box can be reached by either opening the hood or taking off a panel under the dashboard, depending on the type.
To avoid electrical shocks or short circuits, it’s important to disconnect the battery before changing the fuses. Additionally, make sure that the car’s engine is not on.
When breakers keep blowing, it could mean there is a bigger problem with the electricity. It’s best to have a skilled mechanic look at the car to figure out what’s wrong and fix it.
Not at all. This is very risky and could cause electrical fires or damage to the car’s electrical system. When you change a fuse, you should always use a new one with the same amp rating.
Check the car’s electrical parts often for signs of damage or wear. Do not overload electrical circuits, and make sure that all aftermarket electrical installations are put correctly and have fuses.
Commonly failed fuses can be different based on how the car is used and maintained. On the other hand, fuses for items like the radio, headlights, or power windows may fail more often.
Sometimes, the owner of the car can change the fuse themselves because it is a pretty simple job.
A little warmth is normal, but too much heat or a burning smell could mean there is a bigger problem, like a short circuit or an overloaded circuit. If this happens, the fuse should be checked and, if needed, changed.