Warning Symbols: 2020 Mitsubishi Eclipse Cross Indicators Guide

Table of Contents

Warning Symbols: 2020 Mitsubishi Eclipse Cross Indicators Guide

Warning lights in cars are very important because they let drivers know when something might be wrong with their car’s systems. This makes sure that the car is safe to drive and that it gets regular repairs. Knowing what these indicators mean for the 2020 Mitsubishi Eclipse Cross is essential for keeping up with the car’s health and performance. Each sign, from the common “check engine” light to more specific ones like “monitoring tyre pressure” and “anti-lock braking system alerts,” tells you something different about the health of different parts. These marks help drivers understand possible problems, like when the fuel level is low, the engine is overheating, or there are issues with the transmission. Ignoring these signs could cost a lot to fix or even put your safety at risk on the road. 2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)

Indicator light, warning light, and information screen display list

Indicator and warning light list

Position indicator
Turn signal indicators/hazard warning lights
Front fog light indicator
High beam indicator
Automatic High Beam (AHB) indicator
LED headlight warning light
Forward Collision Mitigation system (FCM) OFF indicator
Charging system warning light
Lane Departure Warning (LDW) indicator
Electric power steering system (EPS) warning light
Blind Spot Warning (BSW) indicator light
Information screen display
Electric parking brake warning light
Active stability control (ASC) indicator
Active stability control (ASC) OFF indicator
Anti-lock braking system warning light
Supplemental Restraint System (SRS) warning light
Engine malfunction indicator (“SER-VICE ENGINE SOON” or “Check engine light”)
Seat belt reminder/warning light
Tyre pressure monitoring system warning light
Brake auto hold indicator
Brake warning light

Information screen display When there is information to be announced, such as light reminders, the tone sounds and the screen switches to the displays shown below. Refer to the appropriate page and take the necessary measures. When the cause of the warning display is eliminated, the warning display goes out automatically. Refer to the Warning display list. Refer to Other interrupt displays. NOTE

In the following cases, a warning may be displayed on the information screen and the buzzer may sound for a few seconds, at times. This is caused by the system picking up interference such as strong electromagnetic waves or noise, and is not a functional problem.
An extremely strong electromagnetic wave is received from a source such as an illegal radio set, a spark from a wire, or a radar station.
An abnormal voltage or a static electricity discharge is generated by the operation of your vehicle’s electronics (including after-market parts). If the warning display has occurred several times, take your vehicle to an authorized Mitsubishi Motors dealer or a repair facility of your choice and have the system checked.

Warning display list

Screen	Cause	Do this (Reference)
	You have forgotten to remove the key from the ignition switch.	Remove the key.
	You have forgotten to turn off the lights.
	The washer fluid is running low.	Replenish the container with washer fluid.
	There is a malfunction in the LED headlights.	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system.
	The system has received the customer key programming request correctly and is currently processing the registration request.

Screen	Cause	Do this (Reference)
	There is a fault in the F.A.S.T.-key.

Screen	Cause	Do this (Reference)
The engine switch is pressed on the engine switch is pressed two times or more	Although the engine switch was pressed, the F.A.S.T. key could not be detected.	Touch the F.A.S.T. key to the engine switch.
	The engine switch is pressed to stop the engine while the selector lever is in a position other than the “P” (PARK) position.	Place the selector lever in the “P” (PARK) position to put the operation mode in OFF.
	There is a fault in the EPS.	Have the vehicle inspected by an authorized Mitsubishi Motors dealer or a repair facility of your choice as soon as possible.
	There is a fault in the Anti-lock braking system.	Avoid sudden braking and high-speed driving, park the vehicle in a safe place, and take corrective measures.

Screen	Cause	Do this (Reference)
	The tyre pressure in one of the tyres (except the spare tyre) is low.
	There is a fault in the tyre pressure monitoring system.
	One of the doors or the liftgate is not completely closed. The open door is displayed.	Close the door or liftgate.
	The engine hood is open.	Close the engine hood.
	There is a fault in the electronic immobilizer (Anti-theft starting system).	Put the operation mode in OFF, and then start the engine again. If the warning is not cancelled, please contact an authorized Mitsubishi Motors dealer or a repair facility of your choice.

Screen	Cause	Do this (Reference)
	The driver’s door is open when the operation mode is in any mode other than OFF.	Put the operation mode in OFF.
	An attempt was made to lock all the doors and the liftgate when the operation mode is in any mode other than OFF.	Put the operation mode in OFF.
	There is a fault in the electrical system.	Park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	The engine is overheated.	Park the vehicle in a safe place and take corrective measures.
	l The automatic transaxle or CVT fluid temperature is increased.	Park the vehicle in a safe place and take corrective measures.
	The seat belt is not fastened when the ignition switch or operation mode is in ON.	Wear your seat belt properly.

Screen	Cause	Do this (Reference)
	There is a fault in the fuel system.	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	The vehicle is being driven with the parking brake still applied.	Release the parking brake.
	The brake fluid level is low. There is a fault in the brake system.	Park the vehicle in a safe place and inspect it. If the light still illuminates after the inspection, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance.
	There is a fault in the Electric parking brake.	Immediately have your vehicle inspected at an authorized Mitsubishi Motors dealer.
	The parking brake cannot be applied temporarily due to repeated operation of the Electric parking brake switch within a short time.
	You try to release the Electric parking brake switch without depressing the brake pedal.

Screen	Cause	Do this (Reference)
	The Electric parking brake has been automatically applied.
	The brake auto hold is automatically cancelled.
	There is a fault in the Electric parking brake system or the brake auto-hold system. The brake auto hold cannot be used.	Contact an authorized Mitsubishi Motors dealer to have the system checked.
	The Electric parking brake is not automatically applied because there is a fault in the Electric parking brake system.	When the ignition switch is turned to the “OFF” position or the operation mode is put in OFF, place the selector lever in the “P” (PARK) position and depress the brake pedal more firmly than usual with the right foot. Then, operate the ignition switch or the engine switch. Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.

Screen	Cause	Do this (Reference)
	The brake auto hold system does not turn on because the driver’s seat belt is not fastened.	Press the brake auto hold switch after fastening the driver’s seat belt.
	The brake auto-hold system does not turn off because the brake pedal is not pressed.	Depress the brake pedal more firmly than usual with the right foot. Then, press the brake auto hold switch.
	There is a fault in the engine oil circulation system.	Park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	There is a fault in the charging system.	Park your vehicle in a safe place as soon as possible and contact an authorized Mitsubishi Motors dealer or a repair facility of your choice for assistance.
	There is a fault in the SRS airbag or the pre-tensioner system.	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked, immediately.

Screen	Cause	Do this (Reference)
	There is a fault in the active stability control (ASC).	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	There is a fault in the hill start assist.	Have the vehicle checked at an authorized Mitsubishi Motors dealer or a repair facility of your choice.
	There is a fault in the S-AWC system.	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	There is a fault in the CVT.	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	The S-AWC system is hot.
	The fuel is running low.	Refuel as soon as possible.

Screen	Cause	Do this (Reference)
	The outside temperature is 37 °F (3 °C) or less.	Be careful driving on frozen ground. The ground may be frozen even when this warning is not displayed, so drive carefully.
	The Adaptive Cruise Control System (ACC) has detected the approach of the vehicles in front.	Increase the following distance by depressing the brake pedal or marking other decelerating controls.
	The Forward Collision Mitigation system (FCM) has detected the danger of collision.	Take appropriate action such as depressing the brake to avoid collision.
	The Electric parking brake cannot be applied automatically.	Depress the brake pedal as soon as possible.

Screen	Cause	Do this (Reference)
	The Adaptive Cruise Control System (ACC) control is active.
	The Adaptive Cruise Control System (ACC) control is automatically cancelled and the system is placed in the standby state.
	Conditions for the start of control are not met, and the Adaptive Cruise Control System (ACC) cannot start the control.
	The Adaptive Cruise Control System (ACC) cannot start the control because the speed is out of speed range.
	The Adaptive Cruise Control System (ACC) cannot start the control because not detect the approach of the vehicles in front.
	The Adaptive Cruise Control System (ACC) is temporarily unavailable due to conditions such as the adhesion of contaminants to the sensor. This is not a malfunction.

Screen	Cause	Do this (Reference)
	There is a fault in the Adaptive Cruise Control System (ACC).	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	Foreign objects, such as dirt, snow or ice, adhere to the bumper surface around the sensor.	Remove a foreign object on the bumper surface around the sensor. When the warning display does not disappear after having cleaned the bumper surface around the sensor, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice.
	There is a fault in the Forward Collision Mitigation system (FCM).	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	Foreign objects, such as dirt, snow or ice, adhere to the bumper surface around the sensor.	Remove a foreign object on the bumper surface around the sensor. When the warning display does not disappear after having cleaned the bumper surface around the sensor, contact an authorized Mitsubishi Motors dealer or a repair facility of your choice.
	FCM braking function of the Forward Collision Mitigation system (FCM) has been activated.

Screen	Cause	Do this (Reference)
	The Forward Collision Mitigation system (FCM) is temporarily unavailable for some reason. This is not a malfunction.
	The Lane Departure Warning (LDW) has detected that your vehicle is about to leave or has left the lane.
	There is a fault in the Lane Departure Warning (LDW).	Contact an authorized Mitsubishi Motors dealer or a repair facility of your choice to have the system checked.
	The Blind Spot Warning (BSW) sensor is temporarily not available for some reason such as the environmental condition or an increase in the sensor temperature.	When the warning display does not disappear after waiting for a while, contact an authorized Mitsubishi Motors dealer.
	The Blind Spot Warning (BSW) does not operate normally because there are some malfunctions in the system.	Immediately have your vehicle inspected at an authorized Mitsubishi Motors dealer.

Screen	Cause	Do this (Reference)
	Foreign objects, such as dirt, snow or ice, adhere to the bumper surface around the sensor.	Remove a foreign object on the bumper surface around the sensor. When the warning display does not disappear after having cleaned the bumper surface around the sensor, contact an authorized Mitsubishi Motors dealer.
	The Rear Cross Traffic Alert (RCTA) detects the vehicle approaching your vehicle.	Pay special attention to the rear of your vehicle.
	There is a fault in the sensor.	Contact an authorized Mitsubishi Motors dealer.
	The Forward Collision Mitigation system (FCM), Lane Departure Warning (LDW) and Automatic High Beam (AHB) are temporarily unavailable due to the high or low temperature of the sensor.	After the temperature of the sensor has been in range, the system will automatically return to operation.

Screen	Cause	Do this (Reference)
	The sensor is temporarily unavailable due to conditions such as the adhesion of contaminants to the sensor or windshield. This is not a malfunction.
	There is a fault in the system of automatic high beams.	Contact an authorized Mitsubishi Motors dealer.

Screen	Cause	Do this (Reference)
	When starting the engine, the selector lever is in a position other than the “P” (PARK) or the “N” (NEUTRAL) position, or you press the engine switch without depressing the brake pedal.	Place the selector lever in the “P” (PARK) position, depress and hold the brake pedal with the right foot, and then press the engine switch to start the engine.
	When communication was successful after the F.A.S.T. key was touched to the engine switch.

The operation status of each system is displayed on the information screen. For further details, refer to the appropriate page for each system. NOTE

When operating each system, confirm that the operation status of the system has changed on the information screen. However, the operation status of the system may not be displayed immediately after the warning display appears even if the system is operated.

Screen	System operation status	Reference
	When the “AUTO” mode of S-AWC is selected.
	When the “SNOW” mode of S-AWC is selected.
	l When the “GRAVEL” mode of S-AWC is selected.
	When the ECO mode is activated.
	When the Forward Collision Mitigation system (FCM) is activated or the timing of an alarm is changed.

Screen	System operation status	Reference
	When the Forward Collision Mitigation system (FCM) is deactivated.

This informs you that a periodic inspection is due.

Screen	Do this
	Have an inspection made by an authorized Mitsubishi Motors dealer.

The rest time can be set.

Screen

Do this

Warning Symbols 2020 Mitsubishi Eclipse Cross Indicators Indicator and warning light list fig 77

Park the vehicle in a safe place, turn off the engine, and take a rest. Use this display as a rough guide for taking rests during a long drive. The interval from the start of your trip until this message is displayed can be set. Refer to “Changing the function settings” on page 5-155. The display and buzzer alert the driver when the set time is reached. If you continue to drive without having a rest, the buzzer sounds approximately every 5 minutes to encourage you to take a rest.

In the following cases, the time driven is reset and the display returns to the previous display screen. After this, when the set time is reached again, the display and buzzer encourage you to take a rest.
- The buzzer sounds three times.
- The ignition switch is turned to the “OFF” position or the operation mode is put in OFF.
- The multi-information display switches are held (for approximately 2 seconds or more).

FAQs

What does the warning symbol depicting a tyre with an exclamation mark mean in the 2020 Mitsubishi Eclipse Cross?

It means that there is a problem with the tyre pressure monitoring system (TPMS).

Why is the engine warning light illuminated on my 2020 Mitsubishi Eclipse?

The engine warning light means that there might be a problem with the engine or one of its parts. To get an exact diagnosis of the problem, it’s best to have a qualified technician look at the car.

What does the symbol of a key inside a car mean in the 2020 Mitsubishi Eclipse Cross?

This symbol usually means that there is a problem with the car’s immobilizer or anti-theft device. Make sure that you have the right key and that it’s in the ignition correctly.

Why is the battery warning light on in my 2020 Mitsubishi Eclipse?

The battery warning light means that there might be a problem with the charging system. This could be because the battery, generator, or other electrical parts are broken.

What does the symbol of an exclamation mark within a triangle signify in the 2020 Mitsubishi Eclipse Cross?

This symbol typically means a general warning. Several things could cause it, like not having enough washer fluid, leaving the door open, or something else that isn’t specific.

Why is the ABS warning light illuminated in my 2020 Mitsubishi Eclipse?

The ABS warning light means that there might be a problem with the anti-lock braking system. It’s important to fix this problem right away to make sure the brakes work properly, especially in an emergency.

What does the symbol of a thermometer inside a liquid-filled container mean in the 2020 Mitsubishi Eclipse Cross?

This symbol means the engine is too hot. Stop in a safe place, let the engine cool down, and check the water level. If you keep moving with an engine that is too hot, it can do a lot of damage.

Why is the airbag warning light on in my 2020 Mitsubishi Eclipse?

The airbag warning light means that there is a problem with the car’s airbag system.

What does the symbol of a car with wavy lines underneath represent in the 2020 Mitsubishi Eclipse Cross?

This symbol usually means there is a problem with the electronic stability control (ESC) system. It’s important to take care of this problem right away to keep the vehicle safe and stable.

Why is the oil pressure warning light illuminated in my 2020 Mitsubishi Eclipse?

The oil pressure warning light means that the oil pressure is low, which can damage the engine if not fixed. Stop the car right away, and check the oil level.

What does the symbol of a person seated with an inflated airbag in front of them signify in the 2020 Mitsubishi Eclipse Cross?

This symbol means that the passenger airbag is active. Make sure everyone is sitting properly and that nothing is in the way of the airbag release area.

Why is the symbol of a steering wheel with an exclamation mark illuminated in my 2020 Mitsubishi Eclipse?

This symbol usually means that there is a problem with the power steering system. It’s important to take care of this problem right away to keep driving control.

What does the symbol of a car with a padlock mean in the 2020 Mitsubishi Eclipse Cross?

This symbol means that there is a problem with the car’s immobilizer or security device. Make sure you have the right key, and then try starting the car again.

Why is the symbol of a light bulb illuminated on my 2020 Mitsubishi Eclipse?

The light bulb symbol means that one of the car’s outer lights is not working properly. Check all of the lights, like the headlights, taillights, and turn signals. If any of the bulbs are broken, repair them right away.

What does the symbol of a car with an open hood represent in the 2020 Mitsubishi Eclipse Cross?

This symbol usually means that the hood of the car is not covered all the way. To avoid crashes while driving, make sure you pull over safely, close the hood correctly, and make sure the latches are tight.

Useful Links

View Full PDF: 2020 Mitsubishi Eclipse Cross User Manual| Auto User Guide

2024 Mitsubishi ECLIPSE CROSS Specs, Price, Features, Mileage (Brochure)

How to replace the fuse: 2020 Mitsubishi Eclipse Cross Fuse Diagram Guide

Category

About Us

Privacy Policy

Contact Us