2015 Nissan Quest Owner’s Manual

The 2015 Nissan Quest is a great choice for a minivan because it has a great mix of versatility, comfort, and new features. The Quest is stylish on the road because it has a unique and modern look on the outside. Inside, the minivan has a roomy and well-equipped cabin that can fit up to seven people and can be set up in different ways. Under the hood is a 3.5-liter V6 engine that gives it smooth power and good fuel economy. This makes it a great car for trips with the family or for getting to and from work every day. The 2015 Quest comes with a number of high-tech features, such as the NissanConnect infotainment system, a rearview camera, and optional features like a rear-seat entertainment system and a dual panoramic moonroof. The 2015 Nissan Quest aims to change the way drivers and families think about minivans by being both useful and innovative.

Pre-driving checks and adjustments

KEYS

A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate.
A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by a NISSAN dealer.

1. The master key (2)
2. Mechanical key (inside the key) (2)
3. Key number plate (1)

INTELLIGENT KEY SYSTEM
Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key system components and NISSAN Vehicle Immobilizer System components. As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent Key system and NISSAN Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent Key components when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.

CAUTION

• Be sure to carry the Intelligent Key with you when driving. The Intelligent Key is a precision device with a built-in transmitter. To avoid damaging it, please note the following.
  • The Intelligent Key is water resistant; however, wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe it until it is completely dry.
  • Do not bend, drop or strike it against another object.
  • If the outside temperature is below 148F (-108C) degrees, the battery of the Intelligent Key may not function properly.
  • Do not place the Intelligent Key for an extended period in a place where temperatures exceed 1408F (608C).
  • Do not change or modify the Intelligent Key.
  • Do not use a magnet key holder.
  • Do not place the Intelligent Key near an electric appliance such as a television set, personal computer, or cellular phone.
  • Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system’s function.
• If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key. This will prevent the Intelligent Key from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please contact a NISSAN dealer.

MECHANICAL KEY

• To remove the mechanical key, release the lock knob at the back of the key.
• To install the mechanical key, firmly insert it into the key until the lock knob returns to the lock position.
• Use the mechanical key to lock or unlock the doors and glove box, if they are equipped with a key cylinder.

CAUTION: Always carry the mechanical key installed in the key.

VALET HAND-OFF
When you have to leave a key with a valet, give them the Intelligent Key itself after removing the mechanical key to protect your belongings. To prevent the glove box from being opened during valet hand-off, follow the procedures below.

1. Remove the mechanical key from the Intelligent Key.
2. Lock the glove box with the mechanical key.
3. Hand the Intelligent Key to the valet, keeping the mechanical key in your pocket or bag. Insert the mechanical key into the Intelligent Key when you retrieve your vehicle.

DOORS

WARNING

• Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors and will help keep out intruders.
• Before opening any door, always look for and avoid oncoming traffic.
• Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents.

LOCKING WITH MECHANICAL KEY
The power door lock system allows you to lock or unlock all doors simultaneously using the mechanical key.

• Turning the driver’s door key cylinder to the rear of the vehicle *1 will lock all doors.
• Turning the driver’s door key cylinder once to the front of the vehicle *2 will unlock the driver’s door. After returning the key to the
  neutral position 3, turning it to the front again within 5 seconds will unlock all doors.
• Models with center multi-function control panel:
  You can switch the lock system to the mode that allows you to open all the doors when the key is turned on once.

OPENING AND CLOSING WINDOWS WITH THE MECHANICAL KEY (if so equipped)

1. The driver’s door key operation also allows you to open and close the window which is equipped with the automatic open/close function.
2. To open the windows, turn the driver’s door key cylinder to the front of the vehicle for longer than 1 second. The door is unlocked and the window keeps opening while turning the key.
3. This function can also be performed by pushing and holding the door UNLOCK button of the key.
4. To close the windows, turn the driver’s door key cylinder to the rear of the vehicle for longer than 1 second. The door is locked and the window keeps closing while turning the key.

LOCKING WITH INSIDE LOCK KNOB

• To lock the door individually, move the inside lock knob to the lock position 1 then close the door.
• To unlock, move the inside lock knob to the unlock position 2.
• When locking the door without Intelligent Key, be sure not to leave the Intelligent Key inside the vehicle.

LOCKING WITH POWER DOOR LOCK SWITCH

Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver’s and front passenger’s door armrests.
To lock the doors, push the power door lock switch to the lock position 1 with the driver’s or front passenger’s door open, then close the door.
When locking the door this way, be certain not to leave the Intelligent Key inside the vehicle.
To unlock the doors, push the power door lock switch to the unlock position 2.

Lockout protection
When the power door lock switch (driver or front passenger) is moved to the lock position with any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle and any door open, all doors will unlock automatically and a chime will sound after the door is closed. These functions help to prevent the Intelligent Key from being accidentally locked inside the vehicle.

AUTOMATIC DOOR LOCKS

• All doors will be locked automatically when the vehicle speed reaches 15 MPH (24 km/h).
• All doors will be unlocked automatically when the ignition switch is placed in the OFF position.

The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure:

1. Close all doors.
2. Place the ignition switch in the ON position.
3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the position (UNLOCK) for more than 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.

When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).

SLIDING DOORS
CAUTION

• Always use the door handle to open or close the sliding door. Do not attempt to open or close the door by merely placing your hand on the door edge or door slide roller as this may cause injury.
• When opening the door on a slope, be sure to fully open the door until it locks.

FAQ’s