2022 Nissan ROGUE Fuses and Fuse Box | How to change fuse
The 2022 Nissan ROGUE has a high-tech joining system that keeps its electrical parts safe from damage that could come from overloads or short circuits. The vehicle’s fuse box is where the fuses, which are important parts of the electrical system, are kept. For upkeep reasons, the fuse box is placed in a way that makes it easy to get to. A blown fuse is often the cause of an electrical feature not working right. The 2022 Nissan ROGUE has an easy-to-follow process for changing a switch. First, find the bad fuse by looking at the car’s manual or the diagram on the fuse box door, which shows which electrical part goes with which fuse. Once you’ve found it, carefully take out the blown fuse with a fuse puller or a pair of pliers. After that, replace it with a new fuse that has the same amperage rating. These are easy to find at shops that sell car parts. Performing this easy but necessary job makes sure that the car’s electrical systems work properly, which makes driving more enjoyable. When working with the fusing system, you should always be careful and look at the car’s manual for clear directions.
2022 Nissan Rogue Review, Price, Features, And Mileage (Brochure)
FUSES
ENGINE COMPARTMENT
WARNING
Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or electronic control units or cause a fire.
If any electrical equipment does not operate, check for an open fuse.
- Be sure the ignition switch is turned off and the headlights are off.
- Open the engine hood.
- Remove the fuse/fusible link box cover by using a suitable tool and pushing the tab.
- Locate the fuse that needs to be replaced.
- Remove the fuse using the fuse puller located in the passenger compartment fuse box.
- If the fuse is open, replace it with a new fuse.
- If a new fuse also opens, have the electrical system checked and repaired? It is recommended you visit a NISSAN dealer for this service.
Fusible links
If any electrical equipment does not operate and the fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace them only with genuine NISSAN parts.
For checking and replacing the fusible links, it is recommended you visit a NISSAN dealer.
PASSENGER COMPARTMENT
WARNING
Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or electronic control units or cause a fire.
If any electrical equipment does not operate, check for an open fuse.
- Be sure the ignition switch is turned off and the headlights are off.
- Remove the fuse box cover.
- Remove the fuse with the fuse puller
- If the fuse is open, replace it with a new fuse.
- If a new fuse also opens, have the electrical system checked and repaired? It is recommended you visit a NISSAN dealer for this service.
Extended storage switch (if so equipped)
The extended storage switch is used when shipping the vehicle. It is located in the fuse panel on the driver’s side of the instrument panel. If any electrical equipment does not operate, ensure the extended storage switch is pushed fully in place.
To inspect the extended storage switch, ensure the ignition switch and headlights are off.
How to remove the extended storage switch:
- To remove the extended storage switch, be sure the ignition switch is in the OFF or LOCK position.
- Be sure the headlights are off. (See “Headlight switch” (P.2-58) or “Intelli-gent Auto Headlight system” (P.2-59).)
- Remove the fuse box cover.
- Pinch the locking tabs on the top and bottom of the extended storage switch.
- Pull the extended storage switch straight out from the fuse box.
2022 Nissan Rogue Review, Price, Features, And Mileage (Brochure)
CAUTION
- Be careful not to allow children to swallow the battery and remove parts.
- An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal.
- When changing batteries, do not let dust or oil get on the components.
- There is a danger of explosion if the lithium battery is incorrectly replaced. Replace only with the same or equivalent type.
Replace the battery in the Intelligent Key as follows:
- Remove the mechanical key from the Intelligent Key.
- Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing.
- Replace the battery with a new one. Recommended battery:
CR2032 or equivalent- Do not touch the internal circuit and electric terminals as doing so could cause a malfunction.
- Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity.
- Make sure that the + side faces the bottom of the case.
- Align the tips of the upper and lower parts, and then push them together until it is securely closed.
- Operate the buttons to check their operation.
If you need any assistance with replacement, it is recommended you visit a NISSAN dealer for this service.
FCC Notice:
For the USA:
FCC ID : KR5TXN1 FCC ID : KR5TXN3 FCC ID : KR5TXN4 FCC ID : KR5HFM401
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For Canada:
IC ID : 7812D-TXN1
IC ID: 7812D-TXN3
IC ID : 7812D-TXN4
IC ID : 7812D–HFM401
This device complies with Industry Ca-nada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
8-26 Do-it-yourself
FAQs
A fuse is a safety device designed to protect the vehicle’s electrical system by breaking the circuit if too much current flows through it.
The fuse box in the 2022 Nissan Rogue is typically located in the engine compartment or interior cabin. Consult the owner’s manual for the specific location.
There may be more than one fuse box. Commonly, there is one in the engine compartment and another in the interior.
You may only need a pair of needle-nose pliers or a fuse puller. Some fuses can be removed by hand.
No, it’s crucial to replace the blown fuse with one of the same amperage rating to maintain proper electrical protection.
Visually inspect the fuses. A blown fuse will have a broken wire inside or a cloudy appearance.
The amperage rating indicates the maximum current the fuse can handle before it blows. It’s essential to use the correct rating when replacing a fuse.
See the vehicle’s owner’s manual for a fuse diagram that corresponds to the electrical component causing the issue.
It’s generally safe to replace a fuse without disconnecting the battery, but if you’re unsure, you can disconnect it for an extra layer of safety.
Some vehicles come with spare fuses stored in the fuse box or a designated compartment nearby.
Insert the fuse puller over the blown fuse, squeeze the handles, and pull the fuse straight out.
Yes, some fuse boxes have a transparent cover that allows you to see the fuses without removing them.
Yes, a single-blown fuse can affect multiple electrical components, so it’s essential to check all relevant fuses if you experience various problems.
There may be an underlying electrical issue. Consult a professional mechanic to diagnose and fix the problem.
There is no specific order; however, it’s a good practice to replace one fuse at a time and test the affected component before moving on to the next fuse.
Useful Link:
View Full PDF: Nissan ROGUE 2022 User Guide | Auto User Guide
2022 Nissan Rogue Review, Price, Features, And Mileage (Brochure)