2024 Nissan Murano Seats User Guide

2024 Nissan Murano Seats User Manual

The elegant cabin of the 2024 Nissan Murano is intended to improve your driving experience. Its roomy and cosy seats offer comfort and support, making the trip agreeable for you and your companions. Every trip is enjoyable thanks to Murano’s seats, which combine luxury materials and ergonomic design to provide the ideal balance of flair and utility. 

2023 Nissan Murano Specs, Price, Features and Mileage (Brochure)

2024 Nissan SEATS 

WARNING

• Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and re-ceive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.
• For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat properly. For additional information, see “Precautions on seat belt usage”
• After adjustment, gently rock in the seat to make sure it is securely locked.
• Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls or make the vehicle move. Unattended children could become involved in serious accidents.
• To help avoid risk of injury or death through unintended operation of the vehicle and/or its systems, do not leave children, people who require the assistance of others or pets unattended in your vehicle. Additionally, the temperature inside a closed ve-hicle on a warm day can quickly become high enough to cause a significant risk of injury or death to people and pets.
• Do not adjust the driver’s seat while driving so full attention may be given to vehicle operation. The seat may move suddenly and could cause loss of control of the vehicle.
• The seatback should not be reclined any more than needed for comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased.

CAUTION
When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damage.

FRONT MANUAL SEAT ADJUSTMENT (if so equipped for passenger’s seat)
Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

Forward and backward
Pull the centre of the bar up and hold it while you slide the seat forward or backwards to the desired position. Release the bar to lock the seat in position.

Reclining
To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seatback in position. The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. For additional informa-tion, see “Precautions on seat belt usage” Also, the seatback can be reclined to allow occupants to rest when the vehicle is parked.

FRONT POWER SEAT ADJUSTMENT for driver’s seat and if for passenger’s seat)

Operating tips

• The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds then reactivate the switch.
• Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery.

For additional information, see “Memory seat”

Forward and backward
Moving the switch as shown will slide the seat forward or backward to the desired position.

Reclining
Move the recline switch as shown until the desired angle is obtained.
The reclining feature allows adjustment of the seatback for occupants of different sizes for added comfort and to help obtain proper seat belt fit. For additional informa-tion, see “Precautions on seat belt usage”  Also, the seatback can be reclined to allow occupants to rest when the vehicle is parked.

Seat lifter and tilt (driver’s seat)
Move the front part of the switch as shown to adjust the angle of the seat cushion. Move the back part of the switch as shown to adjust the height of the seat.

Lumbar support (driver’s seat)
The lumbar support feature provides adjustable lower back support to the driver. Push the switch as shown to adjust the seat lumbar area.

REAR BENCH SEAT ADJUSTMENT 

Reclining
Pull the reclining strap OA and position the seatback at the desired angle. Release the reclining strap after positioning the seat at the desired angle. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit. For additional information, see “Precautions on seat belt usage” The seatback may also be reclined to allow occupants to rest when the vehicle is parked.

WARNING

• After adjustment, check to be sure the seat is securely locked.
• Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and re-ceive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.
• For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back and upright in the seat with both feet on the floor and adjust the seat belt properly. For additional information, see “Precautions on seat belt usage” 

ARMREST
The rear bench center armrest is locked in the up position. To lower the armrest, pull the armrest down as shown.
To return the armrest to the up position, push up on the armrest until it is in the full up position.

FLEXIBLE SEATING OWNER’S MANUAL

WARNING

• Never allow anyone to ride in the cargo area or on the rear seats when they are in the fold-down position. In a collision, people riding in these areas without proper restraints are more likely to be seriously injured or killed.
• Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly.
• Do not allow more than one person to use the same seat belt.
• Do not fold down the rear seats when occupants are in the rear seat area or any luggage is on the rear seats.
  • Make sure that the seat path is clear before moving the seat.
  • Be careful not to allow hands or feet to get caught or pinched in the seat.
  • Head restraints/headrests should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been removed for any reason.
• If the head restraints/headrests are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident.
• When returning rear row seatbacks to the upright position, the operator should always verify that the back is locked in the upright position by gently rocking the seatback before allowing passengers to occupy the rear seats. If they are not completely secured, passengers may be injured in an accident or sudden stop.
• Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seat-backs. In a sudden stop or collision, unsecured cargo could cause personal injury.

Folding the rear bench seat

Before folding the rear seats:

• Disconnect and secure the centre seat belt and tongue into the retractor base. For additional information, see “Stowing the rear centre seat belt”. Secure the seat belts on the seat belt hooks on the side wall. For additional information, see “Seat belt hook” 
• Remove drink containers from the rear cup holder.

To fold down the seatbacks: 

1. Pull the strap on the rear seat.
   or
2. Pull the lever beside the cargo area and fold the seatback.

NOTE
If one of the rear seatbacks does not fold flat completely, follow the steps below:

• Move the corresponding front seat forward.
• Push up the rear seatback until it latches in place
• Remove the head restraints/headrests. For additional information, see “Remove”
• Proceed with folding the rear seatback flat.

To return the seatbacks:

1. Lift up each seatback and push it to the upright position until it is latched.
2. HEAD RESTRAINTS/HEADRESTSAlways reconnect the centre seat belt when the seat is returned to the upright position.

WARNING

• When returning the seatbacks, be sure to attach the rear centre seat belt connector.
• Do not unfasten the rear centre seat belt connector except when folding down the rear seat.
• When attaching the rear centre seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear centre seat belt connector is completely secured.
  If the rear centre seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop.
• Head restraints/headrests should be adjusted properly as they may provide significant protection against injury in an accident. Always replace and adjust them properly if they have been removed for any reason.

HEAD RESTRAINTS/HEADRESTS

WARNING
Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end collisions. Adjustable head restraints/headrests must be adjusted properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint/headrest stalk, except for Genuine NISSAN accessories specifically tested for use with the vehicle’s head restraint/headrest stalk. Do not remove the head restraint/headrest. Do not use the seat if the head restraint/headrest has been removed. If the head restraint/headrest was removed, reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position. Failure to follow these instructions can reduce the effectiveness of the head restraints/headrests. This may increase the risk of serious injury or death in a collision.

The illustration shows the seating positions equipped with head restraints/headrests.

Indicates the seating position is equipped with a head restraint.

Indicates the seating position is equipped with a headrest.

 

Indicates the seating position is not equipped with a head restraint or headrest (if applicable).

Your vehicle is equipped with a head restraint/headrest that may be integrated, adjustable or non-adjustable.

• Adjustable head restraints/headrests have multiple notches along the stalk(s) to lock them in a desired adjustment position.
• The non-adjustable head restraints/headrests have a single locking notch to secure them to the seat frame.
• Proper Adjustment:
  • For the adjustable type, align the head restraint/headrest so the center of your ear is approximately level with the center of the head restraint/headrest.
    If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.
• If the head restraint/headrest has been removed, ensure that it is reinstalled and locked in place before riding in that designated seating position.

ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS

1. Removable head restraint/headrest
2. Multiple notches
3. Lock knob
4. Stalks

NON-ADJUSTABLE HEAD RESTRAINT/HEADREST COMPONENTS

1. Removable head restraint/headrest
2. Single notch
3. Lock knob
4. Stalks

REMOVE
Use the following procedure to remove the head restraint/headrest:

1. Pull the head restraint/headrest up to the highest position.
2. Push and hold the lock knob.
3. Remove the head restraint/headrest from the seat.
4. Store the head restraint/headrest properly in a secure place so it is not loose in the vehicle.
5. Reinstall and properly adjust the head restraint/headrest before an occupant uses the seating position.

INSTALL

1. Align the head restraint/headrest stalks with the holes in the seat. Make sure that the head restraint/headrest is facing the correct direction. The stalk with the notch (notches) 1O must be installed in the hole with the lock knob 2O.
2. Push and hold the lock knob and push the head restraint/headrest down.
3. Properly adjust the head restraint/headrest before an occupant uses the seating position.

ADJUST
For adjustable head restraint/headrest
Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position.

Raise
To raise the head restraint/headrest, pull it up.
Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

Lower
To lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is positioned so the lock knob is engaged in the notch before riding in that designated seating position.

FAQs

Useful Links

View Full PDF: 2024 Nissan Murano Owner’s Manual|Auto User Guide

2023 Nissan Murano Specs, Price, Features and Mileage (Brochure)

2024 Nissan Murano Warning Lights and Indicators Guide