2021-2023 Opel Grandland X Warning and Indicator Lights Guide
The 2021-2023 Opel Grandland X is an aesthetically pleasing and multifunctional crossover SUV that is outfitted with an assortment of cutting-edge indicator and warning lighting intended to improve driver safety and impart vital information. This introduction will examine the diverse warning and indicator lighting present in this model, providing insight into their significance and the critical function they fulfil in maintaining your awareness and safety while driving.
These indicators serve as a means of communication between you and your vehicle, notifying you of potential problems or alterations in the vehicle’s operation. The functions they encompass are diverse, ranging from fundamental indications of the vehicle’s condition (e.g., whether the headlamps are illuminated or the parking brake is engaged) to more urgent notifications (e.g., engine and gearbox problems, tyre pressure warnings, and safety systems such as anti-lock brakes and airbags). It is critical to comprehend the significance of these indicator and warning lamps in order to safeguard your well-being and prolong the life of your Opel Grandland X.
Warning lights, Gauges and Indicators
Instrument cluster
The following instrument cluster is available:
Overview
Turn lights
Seat belt reminder
Airbag and belt tensioners
Airbag deactivation
Charging system
Malfunction indicator light
Service vehicle soon
Stop engine
System check
Brake and clutch system
Electric parking brake
automatic operation of electric parking brake off
Electric parking brake fault
Antilock brake system (ABS)
Gear shifting
Lane departure warning
Lane keep assist
Electronic Stability Control and Traction Control system
Engine coolant temperature high
Preheating
Exhaust filter
AdBlue
Deflation detection system
Engine oil pressure
Low fuel
Autostop
Exterior light
Low beam
High beam
High beam assist
Front fog lights
Rear fog light
Rain sensor
Cruise control
Side blind spot alert
Active emergency braking
Speed limiter
Door open
Hybrid system fault
Hybrid system active
Charge cord connected
Electronic Stability Control and Traction Control system off
Speedometer
Indicates vehicle speed.
Odometer
The total recorded distance is displayed in miles.
Driver Information Centre 
Trip odometer
The recorded distance since the last reset is displayed in the Driver Information Centre.
Trip odometer counts up to 9,999 miles.
Press L for 2 seconds to reset trip odometer.
Two trip odometer pages are selectable in the trip / fuel information menu for different trips .
Tachometer 
Displays the engine speed.
Drive in a low engine speed range for each gear as much as possible.
A red marker indicates the beginning of the warning zone of excessive revolutions. For Diesel engines, the warning zone starts at 5000 revolutions per minute. For petrol engines, the warning zone starts at 7000 revolutions per minute.
Caution
If the needle is in the red warning zone, the maximum permitted engine speed is exceeded. Engine at risk.
Fuel Gauge
Displays the fuel level.
Control indicator o illuminates if the fuel level is low.
Never run the fuel tank dry.
Because of the fuel remaining in the tank, the top-up quantity may be less than the specified fuel tank capacity.
Battery gauge
The battery gauge displays the high voltage battery state of charge.
Power indicator gauge
The power indicator gauge informs about the current energy situation of the vehicle.
Charge : Battery is being charged with energy resulting from braking or deceleration of the vehicle
Eco : An optimum in energy is accessible in all driving modes
Power : Vehicle is driven in a dynamic driving style with focus on performance
Engine coolant temperature gauge
Displays the coolant temperature.
50 : engine operating temperature not yet reached
90 : normal operating temperature
130 : temperature too high
Control indicator o illuminates if coolant temperature is too high. Switch off engine immediately.
Caution
Engine oil level monitor
The state of the engine oil level is displayed in the Driver Information Centre for a few seconds following the service information after switching on the ignition.
A proper state of engine oil level is indicated by a message.
If engine oil level is low, I flashes and a message is indicated, accompanied by the C indicator. Confirm engine oil level by using the dipstick and top up engine oil respectively.
Engine oil .
A fault of measurement is indicated by a message. Check engine oil level manually by using the dipstick.
Service Display
The service system informs when to change the engine oil and filter or a vehicle service is required. Based on driving conditions, the interval at which an engine oil and filter change is required can vary considerably.
Service information .
A required service due is displayed in the Driver Information Centre for 7 seconds after switching on the ignition.
If no service is required for the next 1800 miles or more no service information appears in the display.
If service is required within the next 1800 miles, the remaining distance or time duration is indicated for several seconds. Simultaneously C illuminates permanently as reminder.
If service is required in less than 600 miles, C flashes and then illuminates permanently. Remaining distance or time duration is indicated for several seconds.
Overdued service is indicated by a message in the Driver Information Centre which indicates the overdued distance. C flashes and then illuminates permanently until service is executed.
Reset of service interval
After each service, the service indicator must be reset to ensure proper functionality. It is recommended to seek the assistance of a workshop.
If service is executed by yourself, operate as following:
- Switch off ignition
Press and hold button CHECK - Switch on ignition, the distance indication begins a countdown
- When the display indicates =0, release the button
The symbol C disappears.
Retrieving service information
- To retrieve the status of the service information at any time press button CHECK. The service information is displayed for a few seconds.
Service information.
Control indicators
The control indicators described are not present in all vehicles. The description applies to all instrument versions. Depending on the equipment, the position of the control indicators may vary. When the ignition is switched on, most control indicators will illuminate briefly as a functionality test.
The control indicator colours mean:
red : danger, important reminder yellow : warning, information, fault green : confirmation of activation blue : confirmation of activation white : confirmation of activation
See all control indicators on different instrument clusters.
- Turn lights
illuminates or flashes green.
Illuminates briefly
The parking lights are switched on.
Flashes
Turn lights or the hazard warning flashers are activated.
Rapid flashing: failure of a turn light or associated fuse, failure of turn light on trailer.
Bulb replacement .
Turn lights .
FAQs
The significance of the red engine light is as follows: A critical engine issue is denoted by the red engine light. It is recommended to immediately draw over and seek assistance.
A yellow check engine light indicates the possibility of an engine malfunction. Request a diagnostic examination at the service centre located closest to you.
The red battery indicator signifies an issue with the charging system. It is essential to have the electrical system of the vehicle inspected.
The meaning of the blue high beam indicator is as follows: Active high beams are indicated by the blue high beam indicator. Deactivate them as other vehicles approach.
Inquiry into the reason for the illumination of the ABS light A problem has been identified with the anti-lock braking system (ABS). It is more prudent to have a professional inspect it.
The meaning of the yellow tyre pressure indicator is as follows: The yellow tyre pressure indicator indicates inadequate pressure in one or more tyres. Assure the impacted tyres are inflated to the prescribed pressure.
The crimson exclamation point signifies a malfunction in the braking system. It is critical to schedule an immediate inspection of the brake system.
Drive mode is indicated by the green letter “D” on the dashboard. This is a conventional indicator found on automatic transmissions.
Please explain the function of the red seatbelt indicator. A seatbelt fastening reminder is provided by the red seatbelt indicator. Seatbelt use should always be observed for safety purposes.
The turn signal has been engaged, as indicated by the green turn signal arrow. Utilise it when turning or changing lanes.
The red indicator on the oil can signifies inadequate engine oil pressure. Turn the engine off immediately and inspect the oil level.
Explanation of the yellow airbag indicator light” The yellow airbag indicator light signifies a possible malfunction within the airbag mechanism. It should be inspected by an expert.
A yellow traction control indicator indicates active operation of the system. This contributes to stability without requiring any action.
A red handbrake indicator indicates that one has applied the parking brake. Stop using it prior to driving.
The green eco light indicates that the vehicle is operating in an environmentally conscious mode. It encourages travelling in a fuel-efficient manner.
Useful Link
View Full PDF : Opel Grandland X 2021-2023 User Manual| Auto User Guide
2021-2023 Opel Grandland X Keys and Locks Operation