Peugeot 5008 2021-2022 User Manual

The Peugeot 5008, which will come out between 2021 and 2022, is a stylish SUV that can be used in many ways. It has a lot of room, is comfortable, and has high-tech features. The 5008 is made to improve your driving experience and meet the needs of your lifestyle. It has a modern look, flexible seating choices, and new technology. The Peugeot 5008 looks sleek and classy from the outside, giving it a bold and sure appearance on the road. It looks unique and powerful because of its strong lines, large front grille, and expressive headlights. The 5008’s larger size and SUV-like stance give it a lot of room inside while keeping it aerodynamic.

When you step inside the bedroom, you’ll find that it’s roomy and well-equipped. The Peugeot 5008 has a flexible seating arrangement that lets you quickly rearrange the seats to make room for more people or more cargo. The cabin is made with high-quality materials and careful attention to detail, so both the driver and the passengers feel like they are in a high-end, comfortable space. The Peugeot 5008 has high-tech features that make it easier to connect, get things done, and have fun. This includes a touchscreen infotainment system that works with your smartphone. This makes it easy to use the navigation, music, and contact features on your phone. You might also be able to get a panoramic sunroof, ambient lighting, and a high-end sound system in the 5008 to improve your drive experience.

Locking the vehicle with exterior perimeter monitoring only

Deactivate the interior volumetric and anti-tilt monitoring to avoid the unwanted triggering of the alarm, in certain cases such as:

1. Slightly open window.
2. Washing the vehicle.
3. Changing a wheel.
4. Towing the vehicle.
5. Transport on a ship or ferry.

Deactivating the interior volumetric and anti-tilt monitoring

1. Switch off the ignition and within 10 seconds press the alarm button until its red indicator lamp is on fixed.
2. Get out of the vehicle.
3. Immediately lock the vehicle using the remote control or the Keyless Entry and Starting system. Only the exterior perimeter monitoring is activated; the button’s red indicator lamp flashes once every second.

Reactivating the interior volumetric and anti-tilt monitoring

1. Deactivate the exterior perimeter monitoring by unlocking the vehicle using the remote control or the Keyless Entry and Starting system.
   The indicator lamp in the button goes off.
2. Reactivate all monitoring by locking the vehicle using the remote control or the Keyless Entry and Starting system.
   The red indicator lamp in the button once again flashes every second.

Triggering of the alarm
This is indicated by sounding of the siren and flashing of the direction indicators for 30 seconds.
Depending on the country of sale, certain monitoring functions remain active until the alarm has been triggered eleven times consecutively. When the vehicle is unlocked using the remote control or the Keyless Entry and Starting system, rapid flashing of the red indicator lamp in the button informs you that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops.

Failure of the remote control
To deactivate the monitoring functions:

1. Unlock the vehicle using the key in the driver’s door lock.
2. Open the door; the alarm is triggered.
3. Switch on the ignition; this stops the alarm. The indicator lamp in the button goes off.

Malfunction
When the ignition is switched on, the fixed lighting of the red indicator lamp in the button indicates a system malfunction.

Electric windows

1. Left-hand front
2. Right-hand front
3. Right-hand rear
4. Left-hand rear
5. Deactivation of electric window controls located by rear seats

Manual operation
To open/close the window, press/pull the switch without passing the point of resistance; the window stops as soon as the switch is released.

Automatic operation
To open/close the window, press/pull the switch past its resistance point: the window opens/closes completely when the switch is released.
Operating the switch again stops the movement of the window.

CAUTION:
Window controls remain operational for approximately 45 seconds after switching off the ignition or after locking the vehicle.
After that time, the controls are disabled. To reactivate them, switch on the ignition or unlock the vehicle.

Anti-pinch
If the window meets an obstacle while rising, it stops and immediately partially lowers again.

Deactivating the rear controls for the rear electric windows
For your children’s safety, press control 5 to deactivate the controls for the rear electric windows, irrespective of their positions.
The red indicator lamp in the button comes on and a confirmation message is displayed. The lamp will remain lit until the controls are reactivated.
The rear electric windows can still be controlled using the driver’s controls.

Reinitializing the electric windows
After reconnecting the battery, or in the event of abnormal window movement, the anti-pinch function must be reinitialized.
The anti-pinch function is disabled during the following sequence of operations.

For each window:

1. Lower the window fully, then raise it; it will rise in steps of a few centimeters each time the control is pressed. Repeat the operation until the window is fully closed.
2. Continue to pull the control for at least one second after the window reaches the closed position.

WARNING:
If an electric window meets an obstacle during operation, the movement of the window must be reversed. To do this, press the relevant control. When the driver operates the passengers’ electric window controls, it is important to ensure that nothing can prevent the window from closing properly. It is important to ensure that passengers use the electric windows correctly. Pay particular attention to children when operating the windows. Be aware of passengers and/or other persons present when closing windows using the key or the “Keyless Entry and Starting” system. Do not put your head or arms through the open windows when the vehicle is moving – risk of serious injury!

Panoramic sunroof

The panoramic sunroof consists of a movable glass panel that slides over the roof and a blind that can be opened independently. Opening the sunroof automatically opens the blind.

1. To operate the panoramic sunroof or the blind, use the buttons in the roof console.

The sunroof or blind can be operated when the ignition is turned on (if the battery is charged enough), with the engine running, in STOP mode of Stop & Start, and up to 45 seconds after turning off the ignition or after locking the vehicle.

Precautions

1. Do not put your head or arms through the sunroof while the vehicle is moving – risk of serious injury!
2. Ensure that any luggage or accessories carried on the roof bars do not interfere with the movement of the sunroof. Do not place heavy loads on the movable glass panel of the sunroof.
3. If the sunroof is wet, following a shower or washing the vehicle, wait until it is completely dry before opening. Do not operate the sunroof if it is covered by snow or ice – risk of damage!
   Use only plastic scrapers to remove snow or ice from the sunroof.
4. Regularly check the condition of the sunroof seals (e.g. presence of dust, dead leaves).
   If using a car wash, check first that the roof is correctly closed and keep the high-pressure jet at least 30 centimeters from the seals.
5. Never leave the vehicle with the sunroof open.

Operation
When opening the sunroof fully, the movable glass moves to a partially open position, then slides over the roof. Any intermediate position is possible.

CAUTION:
Depending on the speed of the vehicle, the partially open position may vary to improve the acoustics.

WARNING:
Before operating the sunroof or blind control buttons, ensure that no object or person might prevent the movement. Be particularly aware of children when operating the sunroof or blind. If something is trapped when operating the sunroof or blind, you should reverse the movement of the sunroof or blind by pressing the control in question. The driver must ensure that passengers use the sunroof and blind correctly.

Anti-pinch system
If the sunroof or blind encounters an obstacle when closing, the movement is automatically reversed.
The roof anti-pinch system is designed to be effective at speeds of up to 75 mph (120 km/h).

Opening/Closing

1. To open the sunroof or the blind, use the part of the button located towards the rear of the vehicle.
2. To close the sunroof or the blind, use the part of the button located towards the front of the vehicle.

Reference Link

Download link: https://www.seat.com/owners/about-my-car/manuals