Tata Punch 2021 BULB SPECIFICATION User Manual

BULB SPECIFICATION

Sn	Description	Rating	Type	Qty.
1	HIGH BEAM	12V, 55W (HV) 12V, 60W (LV)	H7 (HV) H4 (LV)	2
2	LOW BEAM	12V, 55W	H7 (HV)/H4 (LV)	2
3	TAIL/POSITION	6.5W LED (HV) 12V, 5W (LV)	DomiLED DWA-HKG27 (HV) P21W/5W (LV)	2
4	STOP	5.76W LED (HV) 12V, 21W (LV)	DomiLED D6A-SKG 9 (HV) P21W/5W (LV)	2
5	REVERSE (TAIL LAMP)	12V, 16W	W16W	2
6	TURN	12V, 21W	WY21W	2
7	HMSL	12V, 25W	BULB	1
8	DRL	12V, 9.5W	LED	2
9	POSITION	12V, 1.2W (HV)/12V 5W (LV)	LED (HV)/BULB (LV)	2
10	TURN	12V, 21W	PY21W	2
11	FRONT FOG	12V, 19W	H16	2
12	ROOF LAMP	12V, 5W	BULB W5W	1
13	GLOVE BOX LAMP	12V, 5W	W5W	1
14	REAR REVERSE LAMP	12V, 21W	P21W	1
15	PUDDLE LAMP	12V, 5W	BULB	2
16	REG. PLATE LAMP	12V, 5W	BULB	1
17	LUGGAGE LAMP	12V, 5W	BULB	1

Head Lamp Bulb Replacements

WARNING
Do not run the engine when you change bulbs.
If the engine has been running just prior to replacing bulbs in the head-light housing, please keep in mind that components in the engine com-partment will be hot.

NOTE
Your vehicle’s headlamps have replaceable halogen bulbs.

Replacing The Low Beam Bulb

1. Lift the bonnet to access the bulbs.
2. Remove the Bulb Access cover by rotating as per the direction arrow shown on the cover.
3. Press the pin and pull the connect-or from the bulb.
4. To free the headlamp bulb from the socket, press and swing the retaining spring and pull it straight back.
5. Pull out the bulb from the socket.
6. Insert the new bulb (without touching the glass) into the socket.
7. Move the retaining spring up and push it slightly until it locks properly.
8. Refit the connector in to the Bulb & rotate the Bulb Access Cover as per the direction arrow shown on the cover.

WARNING
It is dangerous if a halogen bulb breaks. These bulbs contain pressurized gas and if broken, will explode causing serious in-jury by the flying glass.
Halogen bulbs can break if the glass portion is touched with bare hands, body oil could cause the bulb to heat unevenly and explode when lit.
Never touch the glass portion of the bulb with your bare hands and al-ways wear eye protection when handling or working around halogen bulbs. Always keep halogen bulbs out of the reach of children.

24 X 7 ROAD ASSISTANCE
Dear Customer,
It is our responsibility and our endeavor to ensure that you have our complete service backup if ever, wherever and whenever you need the same. When you have a road network that spans wide area, the probability of a breakdown happening within hailing distance of a TATA MOTORS Authorized Workshop is very low.
It is precisely for this reason, we have tied up with TVS AA, who will provide break-down assistance including towing to the nearest TATA MOTORS Authorized Work-shop through their Authorized Service Providers (ASP).
The 24X7 On Road Assistance Program shall be automatically available to your vehicle for the duration of Warranty period. The program shall also be available, if you avail the same post warranty.

Response Time

For The On Road Assistance Program

Within City Limits	60 minutes
On State or National Highways	90 minutes
Ghat Roads and other places	120 minutes +/-

(The response time will depend on the location, terrain, traffic density and the time of the day.)

Standard Procedure When Calling For On Road Assistance In Case Of A Breakdown

1. Dial the toll free help line number –1800 209 8282
2. Identify your vehicle with the Vehicle chassis number that is available in the Owner’s Manual.
3. Explain your exact location with land-marks and tell us about the problem you face with the vehicle.
4. Park your vehicle on the edge of the road, open the bonnet and put on the hazard warning signal.
5. Place the advance warning triangle supplied with the vehicle approx. 3 m from the vehicle in the direction of on-coming traffic.

Reference Links

View Full User Guide: Tata Punch User 2021 Manual

Download Manuals: https://cars.tatamotors.com/service/owners/owners-manual

Tata 2023 Top Accessories

[amalinkspro_table id=”32452″ new-window=”on” nofollow=”on” addtocart=”off” /]