2021 Tata Punch 2021 Jacking Point Location On Vehicle
When you look at the bottom of the Tata Punch 2021, you can see its jacking points, which are an important feature that is often ignored. These hidden gems open the door to a world of car care, repairs, and tire changes. They make sure that every interaction with the car’s undercarriage is done safely and with skill. The jacking points are strategically put under the Tata Punch 2021’s frame, calling out to drivers who want to take their driving experience to the next level. Knowing their exact locations makes it easier to do important jobs and keeps accidents from happening. Join us on a journey to find out the well-kept secrets of where the jacking points are on the Tata Punch, giving you the power to lift and support with trust.
Jacking Point Location On Vehicle
Front Jacking location
Rear Jacking location
WARNING
If you do not position the jack correctly at the appropriate jacking point of the vehicle, the jack could tip over with the vehicle raised. There is a risk of injury. Also jack can be damaged. Continue to raise the jack slowly and smoothly until the tyre clears the ground. Do not raise the vehicle more than required.
Lifting the front wheel using jack
Lifting the rear wheel using a jack
Lifting the rear wheel using a jack
Remove wheel nuts with the help of wheel spanner and take out a flat tire.
NOTE
Do not place wheel nuts in sand or on a dirty surface. Do not apply oil or grease on it. Roll the spare wheel into position and align the holes in the wheel studs.
Tighten each nut by hand until the wheel is securely seated on the hub. Lower the jack completely then tighten the wheel nuts one by one using a wheel spanner.
Press fit the wheel cover back (if applicable). Restore all the tools and jack at their respective locations. Place the flat tire at the spare wheel location.
NOTE
Do a check and correct the tire pressure and wheel nuts tightness of the changed wheel at the nearest authorized service station. Get the flat tire repaired at the earliest. Place the jack only at recommended jacking locations.
- Do not put Jack under any part of the Rear Axle.
- Do not put Jack under any part of the Rear Axle.
WARNING
Compliance with these instructions is vital to ensure vehicle safety. Noncompliance with these instructions means risking tire damage, which can affect vehicle handling and lead to loss of vehicle control. This may result in serious injury or death. Inform all other users of the vehicle if standard items for dealing with a puncture (e.g. spare tire) have been replaced by the Puncture Repair Kit.
The Puncture Repair Kit seals most tire punctures to restore temporary mobility. Recommended use only for passenger car ground tires only and vehicle tire inflation pressure up to 300 kPa (3 bar, 43 psi). The system consists of a compressor and a sealant, and serves to effectively and conveniently seal punctures in car tires caused, for example, by nails or similar foreign objects with a diameter of up to ¼“ (6 mm).
Depending on the type and extent of tire damage, some tires can only be partially sealed or not sealed at all. Loss of tire pressure can affect vehicle handling, leading to loss of vehicle control.
Observe the following rules when using the Puncture Repair Kit:
- Drive with caution and avoid making sudden steering or driving maneuvers, maneuvers, especially if the vehicle is heavily loaded or you are towing a trailer.
- The system will provide you with an emergency temporary repair, enabling you to continue your journey to the next vehicle or tire dealer, or to drive a maximum distance of 200 km (120 miles).
- Do not exceed a maximum speed of 80 km/h (50 mph).
- Keep the Puncture repair Kit out of the reach of children.
- Once the Puncture Repair Kit has been used for a temporary tire repair, the functionality of the TPMS module (if These instructions provide a step-by-step explanation of how to use the Puncture re-pair Kit to temporarily repair a tire puncture. Please read the section on “How to proceed in the event of a tire puncture”.
WARNING
Do not use the Puncture repair Kit if the tire has already been damaged as a result of being driven underinflated. Do not try to seal damage other than that located within the visible tread of the tire. Do not try to seal damage to the tire’s sidewall.
Location In Vehicle
In Luggage compartment
Puncture Repair Kit Removal Process
To access the puncture repair kit open the Tailgate
- Remove the two Velcro as shown in figure and take out the puncture repair kit.
Instructions On How To Use The Puncture Repair Kit Safely
- Use product with original vehicle ground tires only.
- Only use the Puncture repair Kit with tubeless tires.
- If used for other than its intended pur-pose, the Puncture repair Kit may cause severe accident or injury due to the fact that compressed air can act as an explosive or propellant.
- Park your vehicle at the roadside so that you do not obstruct the flow of traffic and you are able to use the Puncture repair Kit without being in danger.
- Engage the hand brake, even if you have parked on a level road, to ensure that the vehicle will not move.
- Do not attempt to remove foreign objects like nails or screws penetrating the tire. Leave them as they are.
- Leave the engine running while the Puncture repair Kit is in use, but not if the vehicle is in an enclosed or poorly ventilated area.
- Never leave the Puncture repair Kit un-attended while in use.
- Do not keep the compressor operating for more than 10 minutes otherwise there is a risk of it over-heating.
- Replace the sealant bottle with a new one before the expiration date is reached (see bottle label). In case that the sealant is expired the functionality cannot be fully guaranteed. Only use original Puncture re-pair Kit bottles which are pressure resistant.
How To Proceed In The Event Of Tyre Puncture
You can temporarily repair a tire puncture in two steps. First pump the tire sealant and air into the tire (see Step 1). Immediately thereafter, drive a short distance (3-10 km / 2-6 miles) in order to distribute the sealant in the tire. After that, check the tire pressure and pump more air into the tire if necessary (see Step 2). Then you can proceed to drive with caution for a maximum distance of 200 km (120 miles) and at a maximum speed of 80 km/h (50 mph). Inform all other users of the vehicle that the tire has been temporarily sealed with the Puncture repair Kit and make them aware of the special driving conditions to be observed.
WARNING
Need to drain fluid from tire before re-pair.
FAQ
Answer: The jacking points on the Tata Punch 2021 are usually indicated in the owner’s manual and are commonly located underneath the vehicle’s frame.
Answer: The Tata Punch 2021 typically has four jacking points, one at each corner of the vehicle.
Answer: Yes, the jacking points on the Tata Punch 2021 are designed to be easily accessible for safe and convenient lifting.
Answer: Some vehicles may have markings or indicators near the jacking points to help identify their location.
Answer: It’s recommended to use the jack provided by the manufacturer or a suitable hydraulic floor jack that fits the jacking points securely.
Answer: Yes, the jacking points are designed to safely lift the entire vehicle off the ground when necessary.
Answer: Make sure the ground is stable, use proper safety equipment, and follow the vehicle’s manual guidelines to avoid accidents.
Answer: Yes, the jacking points are commonly used to lift the vehicle for changing flat tires.
Answer: The jacking points are typically the same as the vehicle’s designated lifting points, which are engineered to handle the weight of the vehicle safely.
Answer: Yes, the jacking points are suitable for maintenance tasks that require lifting the vehicle.
Answer: Position the jack under the jacking points, making sure it is aligned with the lifting area to avoid damage.
Answer: While you can jack up the vehicle from the side, it’s recommended to use the designated jacking points for optimal safety.
Answer: Using the manufacturer-recommended jacking points is the safest and most reliable method for lifting the vehicle.
Answer: With proper use and care, the jacking points should remain functional. However, they can be prone to rust and corrosion if not maintained.
Answer: Modifying or adding jacking points is not recommended, as it can compromise the structural integrity of the vehicle. Stick to the manufacturer’s designated points.
Useful Link
View Full User Guide: Tata Punch User 2021 Manual
Tata Punch 2021 pumping Tyre Sealant And Air Into Tyre User Manual