2023 RAM 1500 Owner’s Manual

The 2023 RAM 1500 has a number of new features that make it even more of a premium full-size pickup truck. The exterior of the new model year has been updated with improved aerodynamics and two-tone paint choices, giving it a modern yet rugged look. Inside, there are lots of high-tech features, like an upgraded infotainment system with a bigger tablet display, better ways to connect, and more driver-assistance features, like better adaptive cruise control and help staying in your lane. The motor options have also been increased to include more efficient engines, such as hybrid versions. This is done to improve fuel economy without reducing the ability to tow or haul. The 2023 RAM 1500 continues to live up to the brand’s name for making trucks that can meet a wide range of needs. It does this by combining luxury, innovation, and performance.

KEYS

KEY FOB
Your vehicle is equipped with a key fob that supports Passive Entry, Remote Keyless Entry (RKE), Keyless Enter ‘n Go™ (if equipped), remote air suspension lowering (if equipped), and Remote Start (if equipped). The key fob allows you to lock or unlock all doors, tailgate, and the RamBox (if equipped) as well as activate the Panic Alarm from distances up to approximately 66 ft (20 m). The key fob does not need to be pointed at the vehicle to activate the system. The key fob also contains an emergency key, which is stored in the rear of the key fob.
NOTE

• The key fob’s wireless signal may be blocked if the key fob is located next to a mobile phone, laptop, or other electronic device. This may result in poor performance.
• If your vehicle is equipped with a Wireless Charging Pad, the key fob may not be detected if it is placed within 6 inches (15 cm) of the pad.
• With the ignition in the ON position and the vehicle moving at 2 mph (4 km/h), all RKE commands are disabled.

1. LED Indicator Light
2. Unlock
3. Tailgate Lowering (If Equipped)
4. Air Suspension Remote Lowering (If Equipped) 5 — Lock
5. Remote Start (If Equipped)
6. Panic
7. Emergency Key

In case the ignition switch does not change with the push of a button, the key fob may have a low or fully depleted battery. A low-key fob battery can be verified by referring to the instrument cluster display, which will display a procedure to follow.
NOTE: A low-key fob battery condition may be indicated by a message in the instrument cluster display, or by the LED light on the key fob. If the LED key fob light no longer illuminates from the key fob button push, then the key fob battery requires replacement.

To Lock/Unlock The Doors And Tailgate
All doors, liftgate, and RamBox (if equipped) can be programmed to either unlock on the first push of the unlock button, or for the first push to unlock only the driver’s door, then twice within five seconds to unlock all doors, liftgate, and RamBox (if equipped). To lock all the doors, liftgate, and RamBox (if equipped), push the lock button once. When the doors are unlocked, the turn signals will flash and the illuminated entry system will be activated. When the doors are locked, the turn signals will flash and the horn will chirp. The horn chirp when the lock button is pushed can be programmed on/off within Uconnect Settings.

Using The Panic Feature
To turn the Panic feature on or off, push the Panic button on the key fob. When the Panic feature is activated, the turn signals will flash, the horn may pulse on and off (if equipped with a horn alarm), and the interior lights will turn on. The Panic feature will stay on for three minutes unless you turn it off by either pushing the Panic button a second time or driving the vehicle at a speed of 15 mph (24 km/h) or greater.
NOTE

• The interior lights will turn off if you place the ignition in the ON/RUN position while the Panic feature is activated. However, the exterior lights and horn (if equipped with a horn alarm) will remain on.
• You may need to be less than 35 ft (11 m) from the vehicle when using the key fob to turn off the Panic feature due to the radio frequency noises emitted by the system.

Key Left Vehicle Feature
If a valid key fob is no longer detected inside the vehicle while the vehicle’s ignition system is in the ON/RUN or START position, the message “Key Fob Has Left The Vehicle” will be shown in the instrument cluster display along with an interior chime. An exterior audible and visual alert will also be activated to warn the driver. The vehicle’s horn will rapidly chirp three times along with a single flash of the vehicle’s exterior lights.
NOTE

• The doors have to be open and then closed in order for the vehicle to detect a key fob; the Key Left Vehicle feature will not activate until all of the doors are closed.
• These alerts will not be activated in situations where the vehicle’s engine is left running with the key fob inside.

Air Suspension (Remote Lowering Of The Vehicle) — If Equipped
For easy entry and loading, your vehicle can be lowered by pushing the key fob air suspension lowering button two times. When air suspension lowering is requested using the key fob, the vehicle will send a series of chirps and flashes to alert the customer that the operation has begun and will continue these alerts until it successfully lowers.
The following conditions must be met for the vehicle to lower remotely:

• The vehicle must not already be in Entry/Exit ride height.
• The vehicle battery must be fully charged.
• All doors must be closed.
• The key fob must be out of the vehicle.
• The gear selector must be in PARK.

NOTE: Ensure the vehicle is clear of all objects, pets, and people prior to remote lowering.

Canceling Remote Lowering
Vehicle lowering can be canceled at any time. When vehicle lowering is canceled, the vehicle will raise to the next defined level and lock out the remote lowering feature for five seconds until a new request is made.
To cancel vehicle lowering, push the key fob air suspension lowering button one time during the lowering process. When vehicle lowering is canceled, the horn will chirp two times and the turn signal lamps will flash four times. Once raising is completed, the horn will chirp one time.
NOTE: More information on air suspension is provided later in this manual.

Replacing The Battery In The Key Fob
The replacement battery model is one CR2450 battery.
NOTE

• Customers are recommended to use a battery obtained from Mopar®. Aftermarket coin battery dimensions may not meet the original OEM coin battery dimensions.
• Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further information.
• Do not touch the battery terminals that are on the back housing or the printed circuit board.
• Do not replace the coin battery if the LED on the key fob above the top row buttons blinks when a button is pressed. The coin battery should last a minimum of three years with normal vehicle usage.

1. Remove the emergency key (1) by pushing the emergency key release button (2) on the side of the key fob, and pulling the emergency key out with your other hand.
   1. Emergency Key
   2. Emergency Key Release Button
2. Hold the key fob with the button side facing down, and locate the small rectangular gap on the left side between the housing and the back cover of the key fob. Use a small screwdriver (or similar tool) to pry open the left side of the fob cover while applying pressure until the cover snaps open.
3. Next, locate the gap on the right side of the key fob, which is positioned farther to the edge than the left side gap. Pry open the right side, and remove the back cover.
4. Remove the battery by using your thumb to slide the battery downward and back toward the key ring.
   NOTE: When replacing the battery, ensure the (+) sign on the battery is facing upward. Avoid touching the new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol.
5. Replace the battery by using your thumb to push down and slide the battery under the small lip on the top edge of the opening.
6. To assemble the key fob case, line up the top edge of the back cover with the top of the fob, and press the edges into the interlocking hinges until all edges snap together with no large visual gaps.
7. Reinsert the emergency key until it locks into place.

NOTE: The key fob battery should only be replaced by qualified technicians. If the battery requires replacement, see an authorized dealer.

WARNING

• The integrated key fob contains a coin cell battery. Do not ingest the battery; there is a chemical burn hazard. If the coin cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
• If you think a battery may have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.

FAQ’s