2019 Renault Captur Cluster Displays Guide

2019 Renault Captur Cluster Displays Guide

The advanced cluster display system of the 2019 Renault Captur skillfully combines functionality and technology. By giving important information at a glance, this cutting-edge function improves the driving experience. A central source of information, the cluster display provides current information on speed, fuel economy, navigation, and other topics. Drivers may simply access and modify the display to their preferences thanks to its user-friendly design. Even in different lighting circumstances, clarity and visibility are guaranteed by the high-resolution screen. Renault’s cluster display’s svelte form and intuitive interface are clear examples of their attention to detail. When driving on a road trip or through metropolitan streets, Captur’s cluster display helps drivers stay informed and in charge. With this cutting-edge technology, Renault is demonstrating its dedication to improving road safety and convenience. All things considered, the 2019 Renault Captur’s cluster display, which combines innovation, design, and functionality into one stunning package, establishes a new benchmark for contemporary automotive displays.

DISPLAYS 

Rev counter 1 (graduations x 1000)

Driving style indicator 3
Please refer to the information on “Eco-driving” in Section 2.

Low engine oil level warning
When the engine is started, display 2 alerts the driver when the oil level is at its minimum. Refer to the information on the “Engine oil level” in Section 4.

Fuel level gauge 4

Speedometer 5 (km or miles per hour)

Overspeed buzzer
Depending on the vehicle, a warning beep sounds for approximately 10 seconds every 30 seconds, as long as the vehicle is travelling more than 75 mph (120 km/h).

Instrument panel in miles (option to switch to km/h)

• With the ignition off, press button 8 or 9 at the end of stalk 6 and the start button 7;
• the speedometer unit indicator flashes for approximately ten seconds, then the new unit is displayed: release button 8 or 9 when the unit stops flashing.

To return to the previous mode, repeat the same operation.

Note: once the battery is switched off, the trip computer and warning system automatically return to the original unit of measurement.

ON-BOARD COMPUTER: general information

On-board computer 1
Depending on the vehicle, this includes the following functions:

• distance travelled;
• journey settings;
• information messages;
• operating fault messages (connected to the warning light);
• warning messages (connected to the warning light);
• \vehicle settings customisation menu.

All these functions are described on the following pages.

Display selection keys 2 and 3
Scroll through the following information upwards (key 2) or downwards (key 3) by pressing briefly and successively (the display depends on the vehicle’s equipment and country).

• total mileage and trip mileage recorder;
• fuel used;
• average fuel consumption;
• current fuel consumption;
• estimated range;
• distance travelled;
• average speed;
• distance before service;
  • service counter;
  • oil change counter;
• Reset the tyre pressure
• cruise control/speed limiter programmed speed;
• clock and temperature;
• trip log, operating faults and informa-tion message readout.

Resetting the trip mileage
With “trip mileage recorder” selected on the display, press buttons 2 or 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)
With one of the trip parameters selected as the display, press and hold buttons 2 or 3 until the display resets.

Interpreting some of the values displayed after resetting
The values showing average fuel con-sumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.

For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:

• the vehicle stops accelerating;
• the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
• when driving from an urban area onto the open road.

Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

TRIP COMPUTER: trip settings 

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections	Interpreting the display selected
101778 km 112.4 km FUEL USED 8L AVERAGE 5.8 L/100 CURRENT 7.4 L/100	Total mileage and trip mileage recorder.  Journey parameters. Fuel used. Fuel consumed since the last reset. Average fuel consumption since the last reset. The value is displayed after having travelled at least 400 metres since the last reset. Current fuel consumption. This value is displayed after a speed of approximately 20 mph (30 km/h) is reached.

Examples of selections	Interpreting the display selected
RANGE 541 km DISTANCE 522 km AVERAGE 123.4 km/H	Estimated range with remaining fuel. The value is displayed after driving 400 metres. Distance travelled since the last reset. Average speed since the last reset. The value is displayed after driving 400 metres.

Examples of selections	Interpreting the display selected
On-board computer with mileage- before-service message
SERVICE  Service in INTERVALS        –                    30 000 Kms / 12 MO Service due in 300 Kms / 24 DAYS Service required	Mileage before service or oil change. Mileage before service With the ignition switched on, the engine not running and the display set to “SERVICE INTERVALS”, press button 2 or 3 for approximately 5 seconds to display the mileage before service (distance or time to the next service). When the range approaches its limit, there are several possible scenarios: distance/time remaining less than 900 miles (1,500 km) or one month: the message “Service due in” is displayed, accompanied by the nearest term (distance or time); range equal to 0 km/miles or service date reached: the message “Service required ” is displayed accompanied by a warning light The vehicle requires a service as soon as possible.
Resetting: to reset the distance before service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the service mileage without flashing. NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

Examples of selections	Interpreting the display selected
On-board computer with distance before next service message (cntd.)
SERVICE  Oil change in INTERVALS   30 000 Kms / 24 MO Service due in 300 Kms / 24 DAYS Service required	Mileage before service or oil change. Mileage before service With the ignition switched on and the engine not running, when the message “SERVICE INTERVALS” is displayed, press button 2 or 3 for around 5 seconds to display the mileage before the next service, then briefly press button 2 or 3 to view the mileage before the next oil change (distance or time remaining before the next service). When the range approaches its limit, there are several possible scenarios: distance/time remaining less than 900 miles (1,500 km) or one month: the message “Service due in” is displayed, ac- companies by the nearest term (distance or time); range equal to 0 km/miles or service date reached: the message “Service required ” is displayed accompanied by a warning light The vehicle requires an oil change as soon as possible.
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled. Resetting: to reset the mileage before the next service, press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before service without flashing. NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset.

TRIP COMPUTER: trip settings

Examples of selections

Interpreting the display selected

TYRE PRESSURE  TYRE PRESSURE SET: SET TPW SPEED LIMITER                        CRUISE CONTROL 13° 16:30 NO MESSAGE MEMORISED

Reset the tyre pressure. Please refer to the information on the “Tyre pressure loss warning” in Section 2. Cruise control/speed limiter programmed speed. Refer to the information in “Cruise control” and “Speed limiter” in Section 2. Clock and temperature. Please refer to the information under “Clock and exterior temperature”. Trip log. Successive display: information messages (passenger airbag OFF etc.); operating fault messages (Check injection system, etc.).

TRIP COMPUTER AND WARNING SYSTEM: information messages
These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages.

Examples of messages	Interpreting the display selected
« PARKING BRAKE ON »	Indicates that the parking brake has been applied.
« PLEASE REMOVE KEYCARD »	Request to remove the RENAULT card from the reader when you leave the vehicle.
« TRACTION CONTROL OFF »	Indicates that you have deactivated the traction control function.
« TURN STEERING WHEEL + START »	Turn the steering wheel slightly whilst pressing the vehicle start button to unlock the steering column.
« STEERING WHEEL NOT LOCKED »	This indicates that the steering column has not been locked.

TRIP COMPUTER AND WARNING SYSTEM: operating fault messages
These appear with a
warning light and mean that you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.
They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The
warning light stays on. Examples of operating fault messages are given in the following pages.

Examples of messages	Interpreting the display selected
« CLEAN DIESEL FILTER »	Indicates the presence of water in the diesel filter; contact an approved Dealer as soon as possible.
« CHECK VEHICLE »	Indicates a fault in one of the pedal sensors, battery management system or oil level sensor.
« CHECK AIRBAG »	Indicates a fault in the restraint system in addition to the seat belts. In the event of an accident, it is possible that they may not be triggered.
« CHECK ANTI-POLLUTION SYSTEM »	Indicates a fault in the vehicle’s particle filter system.

TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the
warning light and require you to stop immediately, for your safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages. Note: the messages appear on the display either individually or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.

Examples of messages	Interpreting the display selected
« ENGINE FAILURE HAZARD »	Indicates an injection fault, the vehicle’s engine has overheated or there is a serious engine fault.
« BRAKING SYSTEM FAULT »	Indicates a fault in the braking system.
« BATTERY CHARGING FAULT »	Indicates a fault in the vehicle battery charging circuit (alternator etc.).
« PUNCTURE »	Indicates that at least one wheel is punctured or severely underinflated.

FAQs

Useful Links

View Full PDF: Renault Captur 2019 User Manual|Auto User Guide

2023 Renault Traffic Specs, Price, Features, Mileage and Review

2019 Renault Captur Fuses and Fuse Box | Repair Fuses Guide