2020 Renault Kadjar LCD Display Owner’s Manual
With its state-of-the-art LCD display, the 2020 Renault Kadjar raises the bar for automotive technology. This unique feature includes a number of functions intended to improve the driving experience in addition to improving the interior looks. Accessing a variety of vehicle settings and entertainment options is made simple by the high-resolution screen’s clear images and simple controls. Its intuitive UI makes it easy for drivers to change settings, browse menus, and maintain connectivity while on the road. Renault’s dedication to combining design and utility is demonstrated by the incorporation of cutting-edge technology into the Kadjar’s cabin. The LCD display offers a smooth and captivating user experience whether it is being used for multimedia content enjoyment, personalising preferences, or keeping an eye on the performance of the vehicle. The 2020 Renault Kadjar’s LCD display sticks out as a clever and essential component that genuinely defines modern driving in a time when connectivity and convenience are crucial.
2023 RENAULT KANGOO Specs, Price, Features, Mileage and Review
Kadjar DISPLAYS Guide
Instrument panel A
You can customise your instrument panel with the content and colours of your choice.
For vehicles fitted with a navigation system, refer to the handbook for the equipment.
For vehicles not fitted with a navigation system, refer to the information on the “Vehicle settings customisation menu” in Section 1.
Rev counter 4
(graduations x 1000)
Driving style indicator
Please refer to the information on “Eco-driving” in Section 2.
Speedometer
(km or miles per hour)
This is displayed differently according to how the instrument panel is customised.
Overspeed buzzer
Depending on the vehicle and country, a buzzer sounds for approximately 10 seconds every 40 seconds, as long as the vehicle is travelling in excess of 72 mph (120 km/h).
Instrument panel in miles
(option to switch to km/h)
Vehicles not fitted with a navigation system
- With the ignition off, press the OK button 2 and the start button 6;
- using control 1, select “Settings”, “Instrument panel”, then the unit;
- Press the OK button 2 to confirm.
To return to the previous mode, repeat the same operation.
Vehicles fitted with a navigation system
On the multifunction screen, select “System , “User profile” and “Unit”.
Note: In both cases, once the battery is switched off, the onboard computer automatically returns to the original unit of measurement.
Trip computer and warning system
Refer to the information on the “Trip computer and warning system” in Section 1.
Coolant temperature indicator
Fuel level gauge
If the level is at the minimum, a warning light
integrated in the indicator comes on orange, accompanied by a beep.
Engine oil level low warning
When the engine is started, the instrument panel display A alerts you when the minimum oil level is reached. Refer to the information on the “Engine oil level” in Section 4.
The first time the warning appears, it can be cleared by pressing the OK button 2.
Subsequent warnings will disappear automatically after 30 seconds.
TRIP COMPUTER: general information
On-board computer 1
Depending on the vehicle, this includes the following functions:
- distance travelled;
- journey parameters;
- information messages;
- operating fault messages (associated with the
warning light); - warning messages (associated with the
warning light);
All these functions are described on the following pages.
Display selection keys 2
Scroll through the following information by repeated short presses on control 2 (the display depends on the vehicle equipment and country):
- total mileage and trip mileage recorder;
- journey parameters:
- current fuel consumption;
- Estimated range with remaining fuel;
- distance travelled;
- average speed;
- mileage before service;
- tyre pressure reset;
- trip log, operating faults and information message readout;
- Estimated range with remaining reagent.
Trip mileage resetting
With “trip mileage recorder” selected on the display, press key OK 3 until the mileage recorder resets to zero.
Resetting the journey parameters (reset button)
with the display showing one of the trip settings, press key OK 3 until the display is reset to zero.
Interpreting some of the values displayed after resetting
The values showing average fuel con-sumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.
The average fuel consumption may decrease when:
- the vehicle stops accelerating;
- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
- when driving from an urban area onto the open road.
Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.
ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
|
Examples of selections |
Interpreting the display selected |
|
101 778 km Fuel used
8 l Current
7,4 l/100 |
Total mileage and trip mileage recorder.
Fuel consumed since the last reset.
This value is displayed after a speed of approximately 20 mph (30 km/h) is reached. |
|
Examples of selections |
Interpreting the display selected |
|
Range 541 km Distance 522 km Average
123,4 km/h |
The value is displayed after driving 400 metres.
The value is displayed after driving 400 metres. |
|
Examples of selections |
Interpreting the display selected |
|
On-board computer with mileage- before-service message |
|
|
Service required |
Mileage before service With the ignition switched on, the engine not running and the display set to “Service Intervals”, press and hold the OK button for approximately 5 seconds to display the mileage before service (distance or time to the next service). When the distance value approaches its limit, there are several possible scenarios:
The vehicle requires a service as soon as possible. |
|
Reset: to reset the distance before the next service, press and hold button 2 for approximately 10 seconds until the display shows the mileage before service permanently. NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset. |
|
|
Examples of selections |
Interpreting the display selected |
|
On-board computer with distance before next service message (cntd.) |
|
|
SERVICE
|
With the ignition switched on, the engine not running and the display set to “Mileage before service”, press and hold the OK button for approximately 5 seconds to display the mileage before the next service, then press the 2 button to view the mileage before the next oil change (distance or time remaining before the next service). When the distance value approaches its limit, there are several possible scenarios:
The vehicle requires an oil change as soon as possible. |
|
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled. Resetting: to reset the mileage before a service, press and hold button 2 for approximately 10 seconds until the display shows the range permanently. NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset. |
|
|
Examples of selections |
Interpreting the display selected |
|
|
Refer to the information on the “Tyre pressure monitoring system” in Section 2.
Successive display:
|
|
Top Up AdBlue before 2400 km |
Refer to the information on “Reagent tank” in Section 1. |
TRIP COMPUTER AND WARNING SYSTEM: information messages
These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages.
|
Examples of messages |
Interpreting the display selected |
|
« Parking brake on » « Turn steering wheel + START » « Steering wheel not locked » |
Indicates that the parking brake has been applied. Displayed with the ignition on when the vehicle is running self-diagnostics. Turn the steering wheel slightly whilst pressing the vehicle start button to unlock the steering column. This indicates that the steering column has not been locked. |
TRIP COMPUTER AND WARNING SYSTEM: information messages
These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages.
|
Examples of messages |
Interpreting the display selected |
|
“Clean diesel filter” “Check lighting” “Check vehicle” “Check airbag” “Check antipollution system” |
Indicates the presence of water in the diesel filter
|
TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the
warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Some examples of warning messages are given below. Note: the messages appear on the display either individually or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.
FAQs
|
Examples of messages |
Interpreting the display selected |
|
“Engine failure hazard” “Power steering fault” “Braking system fault” or “Stop vehicle” « Electric failure DANGER » “Puncture” |
Indicates an injection fault, the vehicle’s engine has overheated or there is a serious engine fault. Indicates a fault in the steering or a problem with the four-wheel drive. Indicates a fault in the braking system. Apply the electronic parking brake manually and ensure that the vehicle is immobilised using a chock. indicates a fault in the vehicle battery charging circuit (alternator etc.). Indicates a puncture on the tyre displayed on the instrument panel. |
FAQs
To restart your 2020 Renault Kadjar, turn off the ignition and then back on after a few seconds.
A blank screen on your 2020 Renault Kadjar could suggest a power or connection issue. Examine the power supply and connections attached to the display screen.
To reset the LCD screen on your 2020 Renault Kadjar, press and hold the power button for around 10 seconds until it goes off. Then, let go of the button and wait a few moments before turning it back on.
If your 2020 Renault Kadjar display screen shows a “System Error” notice, restart the system by turning off the ignition and then back on after a brief time.
Distorted visuals on your 2020 Renault Kadjar’s display screen could suggest a software or hardware issue. Try resetting the system first, and if the problem persists, contact a certified expert.
The “Check Connection” warning on the 2020 Renault Kadjar display screen indicates a loose or defective connection. Inspect the wires and connectors leading to the display screen to ensure they are securely connected.
The “No Signal” warning on your 2020 Renault Kadjar display screen could indicate a lack of connection with the source device. Make that the source device (e.g., smartphone, media player) is properly connected and operational.
Software updates for the 2020 Renault Kadjar display screen may be available.
Flickering on your 2020 Renault Kadjar’s display screen could be due to electrical difficulties or broken connections. Inspect the power supply and connections for any irregularities.
A “Low Battery” alert on the 2020 Renault Kadjar display screen may indicate a low battery.
To alter the brightness of your 2020 Renault Kadjar display screen, go to the settings menu via the touchscreen interface. Look for the display or brightness options and change them to your liking.
The display settings on your 2020 Renault Kadjar can be customised. Explore the settings menu on the display screen to change brightness, contrast, and display layout.
An unresponsive display screen on your 2020 Renault Kadjar could becaused to software or hardware difficulties.
If your 2020 Renault Kadjar display screen shows a “Navigation Error” notice, try resetting the navigation system or updating the maps (if available).
To reset your 2020 Renault Kadjar, go to the settings menu and select the reset or factory reset option. Follow the on screen steps to begin the reset procedure, and remember to back up any important data beforehand.
Useful Links
View Full PDF: Renault Kadjar 2020 User Manual|Auto User Guide
2023 RENAULT KANGOO Specs, Price, Features, Mileage and Review