2022 Renault Kadjar Dashboard Display User Guide
In the ever-changing world of car technology, the 2022 Renault Kadjar stands out as a strong rival. It has a lot of high-tech features that are meant to make driving safer and easier. One thing that makes it stand out is its easy-to-use display system, which shows a lot of important warning signs that are needed for a smooth driving experience. With real-time information about the health and state of the vehicle, the Kadjar’s display is an essential tool that drivers can’t do without. It shows them when maintenance is due and when there are potential dangers. More than just being useful, though, the Kadjar’s display is a beautiful mix of cutting-edge technology and user-friendly design. It gives drivers an interface that is easy to understand and use.
2023 Renault Traffic Specs, Price, Features, Mileage and Review
DISPLAYS
Instrument panel A
You can customise your instrument panel with the content and colours of your choice.
For vehicles fitted with a navigation system, refer to the handbook for the equipment.
For vehicles not fitted with a navigation system, refer to the information on the “Vehicle settings customisation menu” in Section 1.
Rev counter 4 (graduations x 1000)
Driving style indicator 3
Please refer to the information on “Eco-driving” in Section 2.
Speedometer 5
(km or miles per hour)
This is displayed differently according to how the instrument panel is customised.
Overspeed buzzer
Depending on the vehicle and country, a buzzer sounds for approximately 10 seconds every 40 seconds, as long as the vehicle is travelling more than 72 mph (120 km/h).
Instrument panel in miles (option to switch to km/h)
Vehicles not fitted with a navigation system
- With the ignition off, press the OK button 2 and the start button 6;
- using control 1, select “Settings”, “Instrument panel”, then the unit;
- Press the OK button 2 to confirm.
To return to the previous mode, repeat the same operation.
Vehicles fitted with a navigation system
On the multifunction screen, select “System” , “User profile” and “Unit”.
Note: In both cases, once the battery is switched off, the onboard computer automatically returns to the original unit of measurement.
Trip computer and warning system
Refer to the information on the “Trip computer and warning system” in Section 1.
Coolant temperature indicator 6
Fuel level gauge 7
If the level is at the minimum, a warning light integrated into the indicator comes on orange, accompanied by a beep. Fill up as soon as possible.
Engine oil level low warning
When the engine is started, the instrument panel display A alerts you when the minimum oil level is reached. Refer to the information on the “Engine oil level” in Section 4.
The first time the warning appears, it can be cleared by pressing the OK button 2.
Subsequent warnings will disappear automatically after 30 seconds.
TRIP COMPUTER: general information
On-board computer 1
Depending on the vehicle, this includes the following functions:
- distance travelled;
- journey parameters;
- information messages;
- operating fault messages (associated with the
warning light); - warning messages (associated with the
warning light);
Display selection keys 2
Scroll through the following information by repeated short presses on control 2 (the display depends on the vehicle equipment and country):
- total mileage and trip mileage recorder;
- journey parameters:
- current fuel consumption;
- Estimated range with remaining fuel;
- distance travelled;
- average speed;
- mileage before service;
- tyre pressure reset;
- trip log, operating faults and information message readout;
- Estimated range with the remaining reagent.
ON-BOARD COMPUTER: general information
Trip mileage resetting
With “trip mileage recorder” selected on the display, press key OK 3 until the mileage recorder resets to zero.
Resetting the journey parameters (reset button)
with the display showing one of the trip settings, press key OK 3 until the display is reset to zero.
Interpreting some of the values displayed after resetting
The values showing average fuel con-sumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.
The average fuel consumption may decrease when:
- the vehicle stops accelerating;
- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
- when driving from an urban area onto the open road.
Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.
ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
|
Examples of selections |
Interpreting the display selected |
| 101 778 km 112,4 km
Fuel used
Current
|
 Total mileage and trip mileage recorder.
Fuel consumed since the last reset.
This value is displayed after a speed of approximately 20 mph (30 km/h) is reached. |
8 l
7,4 l/100|
Examples of selections |
Interpreting the display selected |
| Range
Distance
Average
|
Estimated range with the remaining fuel. The value is displayed after driving 400 metres.
|
541 km TRIP COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
|
Examples of selections |
Interpreting the display selected |
| On-board computer with mileage- before-service message | |
| SERVICE Service in
|
Mileage before service or oil change.
Mileage before service
The vehicle requires a service as soon as possible. |
| Reset: to reset the distance before the next service, press and hold button 2 for approximately 10 seconds until the display shows the mileage before service permanently.
NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the event of an oil change, both the distance before the next service and the next oil change should be reset. |
|
ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
| Examples of selections | Interpreting the display selected |
 + Tyre pressure
No message memorised |
Reset the tyre pressure. Refer to the information on the “Tyre pressure monitoring system” in Section 2.
|
| Top Up AdBlue before 2400 km |
Estimated range with the remaining reagent. |
TRIP COMPUTER AND WARNING SYSTEM: information messages
These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages.
| Examples of messages | Interpreting the display selected |
| « Parking brake on »
« Checking control functions » « Turn steering wheel + START » « Steering wheel not locked » |
Indicates that the parking brake has been applied.
Displayed with the ignition on when the vehicle is running self-diagnostics. Turn the steering wheel slightly whilst pressing the vehicle start button to unlock the steering column. This indicates that the steering column has not been locked. |
TRIP COMPUTER AND WARNING SYSTEM: operating fault messages
These appear with
warning light and means that you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.
They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The warning light stays on. Examples of operating fault messages are given in the following pages.
|
Examples of messages |
Interpreting the display selected |
| “Clean diesel filter” “Check lighting” “Check vehicle”
“Check airbag” “Check antipollution system” |
Indicates the presence of water in the diesel filter; contact an approved Dealer as soon as possible.
Indicates a fault in the headlights. Indicates a fault in one of the pedal sensors, battery management system or oil level sensor. Indicates a fault in the restraint system in addition to the seat belts. In the event of an accident, it is possible that they may not be triggered.
|
warning light. Refer to the information on “Reagent tank” in Section 1.TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the warning light and require you to stop immediately, for your safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Some examples of warning messages are given below. Note: the messages appear on the display either individually or al- ternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.
|
Examples of messages |
Interpreting the display selected |
|
“Engine failure hazard” “Power steering fault” “Braking system fault” or “Stop vehicle” « Electric failure DANGER » “Puncture” |
Indicates an injection fault, the vehicle’s engine has overheated or there is a serious engine fault. Indicates a fault in the steering or a problem with the four-wheel drive. Indicates a fault in the braking system. Apply the electronic parking brake manually and ensure that the vehicle is immobilised using a chock. Indicates a fault in the vehicle battery charging circuit (alternator etc.). Indicates a puncture on the tyre displayed on the instrument panel. |
FAQs
When your 2022 Renault Kadjar shows the “Check Engine” sign, it usually means that there is a problem with the engine or emissions system.
If your 2022 Renault Kadjar gives a “Low Tyre Pressure” message, it means that one or more of the tyres may not have enough air in them. To make sure you can drive safely and keep your tyres from getting damaged,
Your 2022 Renault kadjar’s “Battery Charge Fault” message means there is trouble with the charging system or battery
When the “Service Oil” sign comes up on your 2022 Renault Kadjar, it’s time for an oil change.
Your 2022 Renault Kadjar’s “Brake System Fault” message means that there might be a problem with the stopping system, which is very important for safety.
You should pull over safely as soon as possible if your 2022 Renault Kadjar shows a “Transmission Overheating” sign. This will give the transmission time to cool down.
he “Blind Spot Monitor Malfunction” message on your 2022 Renault Kadjar means that the blind spot tracking system isn’t working right.
If your 2022 Renault Kadjar shows a “Steering System Error” message, it means that there might be a problem with the steering system.
The “Fuel Cap Loose” message on your 2022 Renault Kadjar means that the fuel cap might not be tight enough. Make sure the fuel cap is tightened all the way until it clicks to make sure there is a good seal and stop fuel from evaporating or system problems.
If your 2022 Renault Kadjar shows a “Parking Brake Malfunction” message, don’t use the parking brake
If your 2022 Renault Kadjar shows the “Lane Departure Warning Disabled” message, it means that the lane departure warning device is not working.
If the “Driver Assist Unavailable” sign appears on your 2022 Renault Kadjar, check to see if any sensors are blocked or if there are any system errors.
If the “Rain Sensor Fault” sign comes up on your 2022 Renault Kadjar, make sure the windscreen is clean and nothing is blocking the sensor.
A “Power Steering Assist Failure” message on your 2022 Renault Kadjar means that there may be a problem with the power steering system, which could make the car harder to control.
The “Airbag System Fault” sign on your 2022 Renault Kadjar means that there is a problem with the airbag system, which is very important for keeping people safe in a crash.
Useful Links
View Full PDF: Renault Kadjar 2022 User Manual| Auto User Guide
2023 Renault Traffic Specs, Price, Features, Mileage and Review