2023 Renault Arkana Headlights and Wipers Guide
The 2023 Renault Arkana stands out as a tribute to creativity and functionality in the ever-changing world of automotive technology. Among its many cutting-edge features, this exceptional vehicle’s headlights and wipers represent a harmonious marriage of form and function, offering an unrivalled driving experience. As we explore the intriguing world of these vital components, you’ll see how Renault has once again pushed the frontiers of design and engineering to improve road safety and aesthetics.
The Arkana’s windshield wipers are an example of innovative engineering that extends beyond the headlights. The 2023 Arkana’s rain-sensing wiper technology is intended to deliver a smooth and trouble-free driving experience, especially during severe weather. Finally, the headlights and wipers on the 2023 Renault Arkana are more than simply practical components; they symbolize the spirit of innovation, safety, and beauty that defines this outstanding vehicle.
Headlights and Wipers
Switch A is used to adjust the height of the headlight beams according to the load.
With the dipped beam headlights lit, press or lift switch A as many times as is necessary to select the required position on the instrument panel.
Note: depending on the vehicle, at each engine start-up the position selected is displayed on the instrument panel for approximately 30 seconds and 5 seconds after each press of switch A.
|
|
Examples of positions for adjusting control A according to the load |
|
Driver alone or with front passenger |
0 |
|
All seats occupied |
1 |
|
Driver with passengers and luggage (or load) reaching the maximum permissible all-up weight |
2 or 3* |
|
Driver without passengers and luggage (or load) reaching the maximum permissible all-up weight |
4 |
Depending on the vehicle
This table gives some examples. In all cases, adjust control A according to the vehicle load so that the road can be seen and other drivers are not dazzled.
Vehicle fitted with intermittent windscreen wipers
A single sweep
A short push will trigger one sweep of the wipers.
B stop
C intermittent wiping The wipers will pause for several seconds between sweeps. It is possible to change the time be-tween sweeps by turning ring 2.
D slow continuous wiping
E fast continuous wiping
Special note
When driving the vehicle, the wiping speed slows down whenever the vehicle stops. For example, fast wiping speed will slow to normal wiping speed. As soon as the vehicle moves off, wiping will return to the speed originally selected.
If stalk 1 is operated, it overrides and cancels the automatic function.
Vehicle fitted with front windscreen wiper rain sensor
The rain sensor is located on the windscreen, in front of the interior rear-view mirror.
A single sweep
A short push will trigger one sweep of the wipers.
B stop
C automatic wiper function
When this position is selected, the system detects water on the wind-screen and triggers the wipers at a suitable wiping speed. It is possible to change the triggering thresh-old and the time sweeps by turning ring 2:
- F : minimum sensitivity
- G : maximum sensitivity
- The higher the sensitivity, the quicker the wipers will react and the faster the wipe.
When activating automatic wiping or when increasing sensitivity, one sweep of the blades is performed.
Note:
- The rain sensor is only intended as a driving aid. In the event of reduced visibility, the driver should manually activate the wipers. In foggy weather or during snowfalls, wiping is not automatically triggered and remains under the driver’s control;
In the event of temperatures below zero, automatic wiping is not activated when the vehicle is started. It is automatically activated as soon as the vehicle exceeds a certain speed (approximately 5 mph (8 km/h)); - Do not activate automatic wiping in dry weather;
Fully de-ice the windscreen before activating automatic wiping.
Operating faults
In the event of a malfunction of the automatic wiping, the wiper is set to intermittent wiping. Contact an authorised dealer.
The operation of the rain sensor can be disturbed in the event of:
- Damaged wiper blades; a screen of water or traces left by a blade in the sensor’s detection zone may increase the response time of the automatic wiper, or increase the wiping frequency;
A windscreen with any chip or crack level with the sensor, or a windscreen covered in dust, dirt, insects, ice, the use of washing wax and water-repellent chemicals; the automatic wiping will be less sensitive, or even unresponsive.
D slow continuous wiping
E fast continuous wiping
Special note
When driving the vehicle, the wiping speed slows down whenever the vehicle stops. For example, fast wiping speed will slow to normal wiping speed. As soon as the vehicle moves off, wiping will return to the speed originally selected.
If stalk 1 is operated, it overrides and cancels the automatic function.
Precautions
- In the event of ice, check whether the blades are stuck to the windscreen before operating the wiping mechanism. If you activate the wipers while the blades are stuck down with ice, you may risk damaging both the blade and the wiper motor.
Do not activate the wipers on a dry screen. This will lead to premature wear or damage to the blades.
Specific front wiper position (service position)
This position enables the blades to be lifted to remove them from the wind-screen.
This can be useful:
- To clean the blades;
To release the blades from the wind-screen in winter;
Replace the blades
With the ignition on or engine started, lift the stalk 1 twice to position A (single sweep). The blades stop slightly away from the bonnet.
To return the blades to low position, with the ignition on, ensure that the wipers have folded down onto the wind- screen, then move the stalk 1 to position A (single sweep).
Before switching on the ignition, place the wipers on the windscreen. Otherwise, there may a risk of damage to the bonnet or the wipers when they are switched on.
Before any action involving the windscreen (washing the vehicle, de-icing, cleaning the windscreen, etc.) return stalk 1 to position B (stop).
Risk of injury and/or damage.
In the event of obstacles on the windscreen (dirt, snow, ice etc.), clean the windscreen (including the central area located behind the interior rear view mirror) before starting the wipers (risk of motor overheating).
If an object is preventing a blade from moving, it may stop functioning. Remove the obstacle and reactivate the wiper using the wiper stalk.
Windscreen Washer
With the ignition on, pull stalk 1 then release.
A longer pull will trigger, in addition to the windscreen washer, two sweeps of the wipers followed, a few seconds later, by a third.
On vehicles fitted with a multimedia screen, you can choose to activate or disable the third sweep of the blades.
Note:
In temperatures below zero, the washer liquid risks freezing to the windscreen, thereby reducing visibility. Heat the windscreen using the demister control before cleaning.
When working in the engine compartment, ensure that the windscreen wiper stalk is in position B (stop).
Efficiency of a wiper blade
Check the condition of the wiper blades. How long they last depends on you:
- It must remain clean: clean the blade and the screen regularly with soapy water;
Do not use it when the screen is dry; - Free it from the screen when it has not been used for a long time.
In all cases, replace it as soon as it begins to lose efficiency: approximately once a year.
Precaution for using the wipers
- In freezing or snowy weather conditions, clear the screen before starting the wipers (risk of motor overheating);
Ensure that no objects are obstructing the travel of the blade.
FAQs
Yes, the 2023 Renault Arkana has sophisticated LED headlights.
Yes, the headlights use adaptive technology to improve visibility while reducing glare from oncoming traffic.
You can adjust the brightness of the headlights manually using the vehicle’s controls.
Yes, the headlights are precisely engineered to integrate smoothly with the overall aesthetic of the Arkana, adding to its attractive appearance.
LED headlights, on average, have a longer lifespan than classic halogen lights.
The rain-sensing wipers detect rain and alter their speed accordingly, resulting in a hassle-free driving experience.
You can usually change the sensitivity of the rain-sensing wipers through the vehicle’s settings.
Yes, the wipers have an aerodynamic profile that lowers wind noise and improves driving comfort.
The wipers will slow down to match the intensity of the rain, offering efficient wiping with minimal movement.
Yes, you can usually override the automatic rain-sensing feature and manually regulate the wipers.
Some versions may feature a heating element in the wipers to keep the windshield from freezing.
Yes, wiper blade replacements are generally available from Renault dealerships and aftermarket sources.
The extent of coverage varies according to your location and the individual warranty terms supplied by Renault. Check your warranty documentation carefully.
Retrofitting may be possible, however, compatibility and safety factors should be discussed with a Renault dealership or authorized service centre.
Cleaning the headlights using a moderate automotive glass cleaner and examining and cleaning the wiper blades regularly will help keep them in good working order. Specific maintenance instructions can be found in your owner’s handbook.
Useful Link
View Full PDF : Renault Arkana 2023 User Manual |Auto User Guide
2023 RENAULT ARKANA Specs, Price, Features and Mileage (Brochure)
Related Article
2023 RENAULT AUSTRAL Specs, Price, Features and Mileage (Brochure)
2023 RENAULT ARKANA Specs, Price, Features and Mileage (Brochure)
2023 RENAULT TRAFIC PASSENGER Specs, Price, Features, Mileage and Review
2023 RENAULT KANGOO Specs, Price, Features, Mileage and Review