2023 Renault Koleos Cluster Displays User Manual
The Renault Koleos Cluster came out in 2023 as a technological wonder that wowed drivers with its immersive user experience. The cluster display, which was hidden in the dashboard, greeted tech fans with a symphony of new ideas, complete with clear pictures and easy-to-use controls.
RENAULT KANGOO Specs, Price, Features, Mileage and Review
Renault DISPLAYS AND INDICATORS
Instrument panel A
Depending on the vehicle, you can customise your instrument panel with the content and colours of your choice.
From the multifunction screen, select “System”, then “User profile”. Refer to the handbook for the equipment.
Driving style indicator 3
Please refer to the information on “Eco-driving” in Section 2.
Rev counter 4 (graduations x 1000)
Speedometer 5 (km or miles per hour)
This is displayed differently according to how the instrument panel is customised.
Overspeed buzzer
Depending on the vehicle and country, a buzzer sounds for approximately 10 seconds every 40 seconds, as long as the vehicle is travelling more than 72 mph (120 km/h).
Instrument panel in miles (option to switch to km/h)
Vehicles not fitted with a navigation system
- With the ignition off, press the OK button 2 and the start button 6;
- using control 1, select “Settings”, “Instrument panel”, then the unit;
- Press the OK button 2 to confirm.
To return to the previous mode, repeat the same operation.
Vehicles fitted with a navigation system
On the multifunction screen, select “System”, “User profile” and “Unit”.
Note: In both cases, once the battery is switched off, the onboard computer automatically returns to the original unit of measurement.
Trip computer and warning system
Refer to the information on the “Trip computer and warning system” in Section 1.
Coolant temperature indicator 7
In normal use, indicator 7 should be before area 8. Under “intensive” operating conditions, the needle may approach this zone. This is not serious unless the warning light
comes on accompanied by a message on the instrument panel and a beep.
Fuel level gauge 9
If the level is at the minimum, a warning light integrated into the indicator comes on orange, accompanied by a beep. Fill up as soon as possible.
Engine oil level low warning
When the engine is started, the instrument panel display A alerts you when the minimum oil level is reached. Refer to the information on the “Engine oil level” in Section 4.
The first time the warning appears, it can be cleared by pressing the OK button 2.
Subsequent warnings will disappear automatically after 30 seconds.
TRIP COMPUTER: general information
On-board computer 1
Depending on the vehicle, this includes the following functions:
- distance travelled;
- journey parameters;
- information messages;
- operating fault messages (associated with the
warning light);
- warning messages (associated with the
warning light);
All these functions are described on the following pages.
Display selection keys 2
Scroll through the following information by repeated short presses on control 2 (the display depends on the vehicle equipment and country):
- total mileage and trip mileage recorder;
- journey parameters:
- average fuel consumption;
- current fuel consumption;
- estimated range;
- distance travelled;
- average speed;
- mileage before service;
- tyre pressure reset;
- trip log, operating faults and information message readout.
Trip mileage resetting
With “trip mileage recorder” selected on the display, press key OK 3 until the mileage recorder resets to zero.
Resetting the journey parameters (reset button)
with the display showing one of the trip settings, press key OK 3 until the display is reset to zero.
Interpreting some of the values displayed after resetting
The values showing average fuel con-sumption and average speed will become more stable and reliable the further you have travelled since the last time the Reset button was pressed.
The average fuel consumption may decrease when:
- the vehicle stops accelerating;
- the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
- when driving from an urban area onto the open road.
Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.
FAQs
There are several cluster displays in the 2023 Renault Koleos to meet the wants of different drivers.
The infotainment system in your car has a settings menu where you can change how the cluster screens look.
Yes, you can change how bright the cluster displays are in the car settings.
The screens in the cluster show important driving data like speed, gas mileage, trip length, and more.
For your benefit, the navigation system can show turn-by-turn directions and other useful data right on the cluster displays.
Yes, the cluster displays do have a “night mode” that can be used to cut down on glare and improve vision while driving at night.
Depending on the connectivity choices, you may be able to see calls or messages on the cluster displays when they are synced with your phone.
Most of the time, you can use the buttons on the steering wheel or the infotainment system interface to switch between cluster display modes.
That’s right, the cluster screens can show important safety alerts like low tyre pressure, lane departure and more.
Yes, the cluster displays can be used to reset some car settings and trip information.
Yes, the cluster displays may show maintenance reminders like when to change the oil and when to get serviced based on how often the car is used.
Depending on how the car is set up, the cluster screens may show some diagnostic information that can be used to keep an eye on the car’s health.
Different versions of the 2023 Renault Koleos may have different customisation options, but some of them have features that let you change the layout and design of the cluster displays to fit your tastes.
Useful Links
View Full PDF: Renault Koleos 2023 User Manual|Auto User Guide
2023 RENAULT KANGOO Specs, Price, Features, Mileage and Review