Fuse Diagram Guide: 2021 Renault Captur Replacing Blown Fuse
As any vehicle owner will agree, a car’s fuse box is a critical component that is frequently disregarded until an electrical problem occurs. When it comes to changing a blown fuse in the 2021 Renault Captur, understanding the fuse box schematic is critical. Knowing how to navigate the intricate arrangement of fuses ensures that electrical problems are resolved quickly, whether they are caused by a failing light, a defective power outlet, or a non-responsive electronic system. In this detailed guide, we will delve into the complexities of the Renault Captur’s fuse box, equipping owners with the knowledge they need to analyze and resolve electrical issues efficiently. From interpreting the fuse box schematic to locating the faulty fuse and performing a smooth replacement, this step-by-step guide seeks to demystify the process, giving Renault Captur fans and inexperienced technicians alike clarity and confidence.
2023 Renault Traffic Specs, Price, Features, Mileage and Review
Captur FUSES
Fuse box
If any electrical component does not work, check the condition of the fuses.
Passenger compartment fuses A
Unclip the access flap 1.
To comply with current legislation, or as a precaution, you can obtain an emergency kit from your approved dealer containing a set of spare bulbs and fuses.
Fuses located in the passenger compartment behind a flap in the B glovebox
Unclip the access flap 2.
Tweezers 3
Remove the fuse using the tweezers 3 on the back of the flap.
To remove the fuse from the tweezers, slide the fuse to the side.
It is not advisable to use the free fuse locations.
Check the fuse in question and replace it, if necessary, by a fuse of the same rating.
If a fuse is fitted with too high a rating, it may cause the electrical circuit to overheat (risk of fire) in the event of an item of equipment using an excessive amount of current.
Allocation of fuses
(the presence of certain fuse depends on the vehicle equipment level)
| Symbol | Allocation |
 |
Windscreen washer
Multimedia accessories socket, multimedia screen Front and rear second-row accessories socket Horn Towbar socket Heated rear-view mirrors Brake lights, passenger compartment central unit Passenger compartment centre unit, rear wiper, rear fog light Direction indicator lights, hazard warning lights, high-level brake lights |
Use the fuse allocation label in the storage compartment to identify the fuses.
Certain fuses should only be replaced by a qualified professional. These fuses are not listed on the label.
Only change the fuses represented on the label.
Fuses in engine compartment C
Some functions are protected by fuses located in the engine compartment (unit C).
However, because of their reduced accessibility, we advise you to have your fuses replaced by an approved Dealer.
4 fuse: LPG circuit shut-off.
Please note when working close to the engine that it may be hot. In addition, the engine cooling fan may start at any moment. The
warning light in the engine compartment reminds you of this.
Risk of injury.
Before carrying out any action in the engine compartment, you must switch off the ignition.
How to Replace fuse in the Renault Captur 2021
- Find the Fuse Box
- The fuse box in the Renault Captur is usually found in the engine bay or inner cabin.
- Turn Off the Ignition
- Before working on the fuses, turn off the ignition to avoid electrical dangers.
- Access the Fuse Box
- Depending on the position, you may need to remove a panel or cover to reach the fuse box. Remove any clips or screws that are holding the lid in place with a screwdriver or by hand.
- locate the Blown Fuse
- Visually inspect the fuses to locate any that have blown. A blown fuse will usually have a broken filament or a discoloured look.
- Remove the Blown Fuse
- With a fuse puller or a pair of needle-nose pliers, carefully grasp the blown fuse and pull it straight out of the socket. Be gentle so as not to damage the fuse or the fuse box.
- Install Replacement Fuse
- Insert the replacement fuse into the corresponding socket in the fuse box. Make sure it fits firmly and is fully pushed in.
- Replace the Fuse Box Cover
- After replacing the blown fuse, reconnect the fuse box cover securely by reinstalling any previously removed clips or screws.
- Turn On the Ignition
- After replacing the fuse, restart the engine to test the electrical component or system that is connected to the fuse. Check that it is functioning properly.
- Check for Proper Operation
- Test any impacted electrical components or systems to ensure that the problem has been fixed and that there are no other issues.
FAQs
The 2021 Renault Captur’s fuse box can be found in the engine bay or interior cabin, depending on the model and trim level.
Accessing the fuse box in the 2021 Renault Captur may require removing a panel or cover attached with clips or screws.
The fuse box diagram shows the location and function of each fuse in the 2021 Renault Captur.
The fuse box diagram shows the location and function of each fuse in the 2021 Renault Captur.
A blown fuse in the 2021 Renault Captur can be spotted by a visible broken filament or discoloured look.
The 2021 Renault Captur employs normal blade-type fuses with varying amperages.
The fuse box diagram shows the fuse’s position, amperage rating, and the electrical component or system it protects.
Before replacing a blown fuse in the 2021 Renault Captur, turn off the ignition and disconnect the battery to avoid electrical dangers.
To identify the fuse causing an electrical issue in your 2021 Renault Captur, look to the fuse box schematic and test each fuse with a multimeter.
Replacing a blown fuse in the 2021 Renault Captur is a simple procedure that most owners can do without expert assistance.
Fuses in the 2021 Renault Captur normally last for a long period, but may occasionally blow owing to electrical problems or circuit overload.
Useful Links
View Full PDF: Renault Captur 2021 User Manual| Auto User Guide
2023 Renault Traffic Specs, Price, Features, Mileage and Review