Instrument Cluster: 2023 Renault Trafic Display Messages Guide

Instrument Cluster: 2023 Renault Trafic Display Messages Guide

As soon as you climb into the driver’s seat of the 2023 Renault Trafic, you’ll notice that the instrument cluster skillfully combines innovation and usability. Your attention is drawn to a clear and accurate display of crucial information as soon as you take up the driver’s seat. Your digital copilot, the instrument cluster provides a wide range of screen messages to improve your driving experience. Every look at the screen confirms Renault’s dedication to provide a complex yet user-friendly driving experience, from vital notifications regarding vehicle status to real-time updates on navigation, entertainment, and driver aid systems. The 2023 Renault Trafic’s instrument cluster, with its user-friendly interface and smooth technological integration, keeps you informed and improves your sense of connection to the road ahead, making every trip easy and fun.

2023 Renault Traffic Specs, Price, Features, Mileage and Review

DISPLAYS AND INDICATORS 

Rev counter 1
(graduations x 1000)

Speedometer 
(km or miles per hour)

Overspeed buzzer
Depending on the vehicle, a buzzer sounds for approximately 10 seconds every 40 seconds, as long as the vehi-cle is travelling in excess of 72 mph (120 km/h).

Driving style indicator 4
Please refer to the information on “Eco-driving” in Section 2.

Low engine oil level warning
When the engine is started, display 3 alerts the driver when the oil level is at its minimum. Refer to the information on the “Engine oil level” in Section 4.

Fuel gauge 5

Instrument panel 6 in miles
(option to switch to km/h)

• With ignition off, press button 9 or 10 at the end of stalk 7 and the start button 8;
• the speedometer unit indicator flashes for approximately ten seconds, then the new unit is displayed: release button 9 or 10 when the unit stops flashing.

To return to the previous mode, repeat the same operation.

Note: once the battery is switched off, the trip computer and warning system automatically returns to the original unit of measurement.

ON-BOARD COMPUTER: general information

On-board computer 1
Depending on the vehicle, this includes the following functions:

• distance travelled;
• journey settings;
• information messages;
• operating fault messages (con-nected to the © warning light);
• warning messages (connected to the ® warning light).

All these functions are described on the following pages.

Display selection keys 2 and 3
Scroll through the following information upwards (key 2) or downwards (key 3) by pressing briefly and successively (the display depends on the vehicle equipment and country).

• Total mileage and trip mileage recorder;
• fuel used;
• average fuel consumption;
• current fuel consumption;
• estimated range with remaining fuel;
• distance travelled;
• average speed;
• mileage before service, oil change counter;
• reset the tyre pressure;
• cruise control/speed limiter programmed speed;
• clock and temperature;
• trip log, operating faults and informa-tion message readout;
• percentage volume of remaining rea-gent.

ON-BOARD COMPUTER: general information

Resetting the trip mileage
With “trip mileage recorder” selected on the display, press button 2 or 3 until the mileage recorder resets to zero.

Resetting the journey parameters (reset button)
With one of the trip parameters selected as the display, press and hold button 2 or 3 until the display resets.

Interpreting some of the values displayed after resetting
The values showing average fuel con-sumption, range and average speed will become more stable and reliable the further you travel after pressing the reset button.
For the first few miles after pressing the reset key you will notice that the range increases as you travel. This range takes into account the average fuel consumption since the last time the reset button was pressed. Therefore, the average fuel consumption may decrease when:

• the vehicle stops accelerating;
• the engine reaches its operating temperature (if the engine was cold when the reset key was pressed);
• when driving from an urban area onto the open road.

Automatic resetting of the journey parameters
Resetting occurs automatically when the maximum value of any of the parameters is exceeded.

ON-BOARD COMPUTER: trip settings
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections	Interpreting the display selected
101778 km 112.4 km FUEL USED 8L AVERAGE 5.8 L/100 CURRENT 7.4 L/100	Total mileage and trip mileage recorder.   Journey parameters. Fuel used Fuel consumed since the last reset. Average fuel consumption since the last reset. The value is displayed after having travelled at least 400 metres since the last reset. Current fuel consumption. This value is displayed after a speed of approximately 20 mph (30 km/h) is reached.

Examples of selections	Interpreting the display selected
RANGE 541 km DISTANCE 522 km AVERAGE 89.4 km/h	Estimated range with remaining fuel. The value is displayed after driving 400 metres. Distance travelled since last reset. Average speed since the last reset. The value is displayed after driving 400 metres.

Examples of selections		Interpreting the display selected
On-board computer with distance before next service message (cntd.)
SERVICE INTERVALS	OIL CHANGEIN 30 000 km / 24 MO	Mileage before service With the ignition switched on and the engine not running, when the message “SERVICE INTERVALS” is displayed, press button 2 or 3 for around 5 seconds to display the mileage before the next service (distance or time remaining before the next oil change). When the distance value approaches its limit, there are several possible scenarios: distance/time remaining less than 900 miles (1,500 km) or one month: the message “Service due in” is displayed ac- companies by the nearest term (distance or time); range equal to 0 km/miles or service date reached: the message “SERVICE REQUIRED” is displayed accompanied by a warning light . The vehicle requires an oil change as soon as possible.
	SERVICEDUE IN
	300 km / 24 DAYS
	SERVICE REQUIRED
Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed, door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can therefore decrease more quickly in some cases than the actual distance travelled. Resetting: to reset the mileage before the next oil change, display the remaining range (distance and time), then press and hold button 2 or 3 for approximately 10 seconds until the display shows the mileage before oil change without flashing.

Examples of selections

Interpreting the display selected

TYRE PRESSURE SET <PRESS-HOLD> SPEED LIMITER 90 km/h CRUISE CONTROL 90 km/h 13°  16:30 NO MESSAGE MEMORISED ADBLUE 62%

Reset the tyre pressure. Please refer to the information on the “Tyre pressure loss warning” in Section 2. Cruise control/speed limiter programmed speed. Refer to the information on the “Speed limiter” and “Cruise control” in Section 2. Clock and temperature. Please refer to the information on the “Clock and exterior temperature” in Section 1. Trip log. Successive display: information messages (passenger airbag OFF etc.) operating fault messages (check the injection system, etc.). Percentage volume of remaining reagent. Refer to the information on “Reagent tank” in Section 1.

TRIP COMPUTER AND WARNING SYSTEM: operating fault messages
These appear with the © warning light and mean that you should drive very carefully to an authorised dealer as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.
They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The © warning light stays on. Examples of operating fault messages are given in the following pages.

Examples of messages	Interpreting the display selected
« PARKING BRAKE ON »	Indicates that the parking brake has been applied.
« BATTERY LOW START ENGINE »	Indicates that the vehicle must be started to recharge the battery (e.g. after the engine has been switched off for some time whilst listening to the radio).
« TOP UP OIL LEVEL »	Indicates that the oil level needs adjusting.
« AUTO DOOR LOCK OFF »	Indicates that the automatic door locking while driving is deactivated.
« STEERING WHEEL NOT LOCKED »	Indicates that the steering column has not been locked.

TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages.

Note:
the messages appear on the display either individually or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.

Examples of messages

Interpreting the display selected

« CLEAN DIESEL FILTER » “CHECK VEHICLE” “CHECK AIRBAG” “Check antipollution system”

Indicates the presence of water in the diesel filter; contact an approved Dealer as soon as possible. Indicates a fault in one of the pedal sensors, battery management system or oil level sensor. Indicates a fault in the restraint system in addition to the seat belts. In the event of an accident, it is possible that they may not be triggered. Indicates a fault in the vehicle’s emission control system. Indicates a fault in the emissions reduction system when it is accompanied by the warning light. Refer to the information on “Reagent tank” in Section 1.

TRIP COMPUTER AND WARNING SYSTEM: warning message
These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.
Examples of warning messages are given in the following pages.

Note
the messages appear on the display either individually or alternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.

Examples of messages	Interpreting the display selected
« GEAR BOX RISK OF BREAKAGE »	Indicates an injection fault, the vehicle’s engine has overheated or there is a serious engine fault.
« Braking system fault »	Indicates a fault in the braking system.
« BATTERY CHARGING FAULT »	Indicates a fault in the vehicle battery charging circuit (alternator etc.).
« PUNCTURE «	Indicates that at least one wheel is punctured or severely underinflated.

FAQs

Useful Links

View Full PDF: 2023 Renault Trafic User Manual|Auto User Guide

2023 Renault Traffic Specs, Price, Features, Mileage and Review

2023 Renault Trafic Warning Lights and Symbols Guide