Renault Kangoo 2023 User Manual

The Renault Kangoo 2023 is a family van and cargo van that can be used for both. It blends functionality, comfort, and innovation. With its new form, the Kangoo looks modern and strong, with clean lines and a big grille in front. This van is made to meet the needs of both individuals and businesses. It is flexible and has a lot of room for people or goods. Inside the Kangoo, you’ll find a roomy, well-designed cabin that’s comfy and easy on the body. The seats are made to support you on long trips, and the layout of the inside makes it easy to get around and make good use of room. Depending on how it’s set up, the Kangoo can carry a lot of people or a lot of things. This makes it useful for a lot of different things. The Kangoo has a number of smart features and technologies that make it easier to use and keep in touch. This includes an infotainment system with a touchscreen and smartphone connection, so drivers can stay in touch and have fun while on the go. The Kangoo may also have driver-assistance systems like parking sensors, a backup camera, and advanced safety features to make driving safe and easy.

Renault Kangoo 2023

RADIO FREQUENCY REMOTE CONTROL:

The remote control A can be used to lock or unlock the doors and boot. It is powered by a battery that can be replaced.
Locking the doors
Press locking button 1.
The hazard lights and side repeaters flash twice to indicate that the doors have locked and, on some vehicles, the door mirrors fold in automatically.
Pressing the 1 button twice locks the vehicle and closes the front and rear windows and, depending on the vehi-cle, the sunroof.
Note: if a door or the boot is open or not properly shut, locking is not carried out. A beep sounds and the hazard warning lights and side repeaters do not flash.

Locking/unlocking only the boot
Press the button 3 to lock/unlock the boot only.

Unlocking the doors
Pressing button 2 unlocks the doors and tailgate.
The hazard lights and side repeaters flash once to indicate that the doors have unlocked and, on some vehicles, the door mirrors fold out automatically.
Note:
With the ignition on and engine running.

Card operating range

This varies according to the environment: take care not to accidentally lock or unlock the vehicle by inadvertently pressing the buttons on the card.
Note: if a door or the boot is open or not properly shut, locking is not carried out. A beep sounds and the hazard warning lights and side repeaters do not flash.

Distance lighting function

Pressing button 4 switches on the dipped beam headlights and the exterior lighting for approximately 20 sec- onds. This can be used, for example, to identify the vehicle from a distance when parked in a car park. Pressing and holding the 4 button for approximately two seconds activates the exterior lighting and a sound is emitted.
Note: pressing button 4 again switches off the lighting.

Advice
Avoid leaving the card in hot, cold or humid areas. Do not keep the card in a place where it could be bent or dam- aged accidentally, such as in a back pocket of a garment.

Replacement: need for an additional card
If you lose your card or require an- other, you can obtain one from an authorised dealer. If a card is replaced, it will be neces- sary to take the vehicle and all its cards to an approved Dealer to ini- tialise the system. You may use up to four cards per vehicle.

Interference
Interference by factors in the immediate vicinity (external installations or the use of equipment operating on the same frequency as the card) may disrupt its operation.

Hands-free locking when moving away from the vehicle

With the card on you, doors and lug-gage compartment door closed, move away from the vehicle: it will lock auto-matically once you have left the access zone 3.
Note: the distance at which the vehicle locks depends on the surroundings.
To indicate that the vehicle has been locked, the hazard warning lights flash twice and then light up for ap-proximately four seconds, and a beep sounds in confirmation.

If the card has been within the detec-tion area 3 for approximately 15 min-utes, remote locking is disabled. To lock the vehicle, press the 2 button on the 1 handle or the 5 button on the cardThe vehicle cannot be remotely locked if the card is within the area 4.

“Hands-free” unlocking/locking using button 2

With the card in zone 3 and the vehi-cle locked, press the button 2 on the handle 1 of one of the two front doors: the vehicle unlocks. Press the button 2 also unlocks all the doors and the tail-gate.
The hazard lights and side repeaters flash once to indicate that the doors have unlocked and, on some vehicles, the door mirrors fold out automatically.
Pressing the 2 button again locks the vehicle.

Special features relating tohands-free locking

After locking in “hands-free” mode, you have to wait approximately three sec-onds before being able to unlock the vehicle again. During these three sec-onds, the door handles can be tried to make sure that the vehicle is locked properly.
Note: if a door or the boot is open or not properly shut, locking is not carried out. A beep sounds and the hazard warning lights and side repeaters do not flash.

Using the card as a remote control

Unlocking with the card
Press button 7. The hazard lights and side repeaters flash once to indicate that the doors have unlocked and, on some vehicles, the door mirrors fold out automatically.

If, while the engine is running, a door is opened and closed, and the card is no longer in the zone 4, the message “Keycard Not Detected” indicates that the card is not inside the vehicle. This will, for example, prevent you from driv-ing away after dropping off a passenger who has kept the card on them.
The warning disappears when the card is detected again.

Locking/unlocking only the boot
Press the button 6 to lock/unlock the boot only.If the vehicle is equipped with a dead-locking function, this allows you to lock the opening elements and to prevent the doors from being unlocked using the interior handles (for example, by breaking the window and then trying to open the door from the inside).
To do this, press button 1 twice in quick succession. Locking is confirmed by two slow flashes and three quick flashes of the hazard warning lights and indicator lights. Special note: deadlocking is not possible if the hazard warning lights or the side lights are lit.

If you have switched off the ignition and left the lights switched on, a re- minder buzzer will sound when a door is opened.

Door/tailgate open buzzer

When the vehicle is stationary, the 2 warning light appears on the instrument panel accompanied by a warning light indicating which of the opening ele- ments (door(s), luggage compartment) are open or incorrectly closed. Once the vehicle reaches a speed of approximately 6 mph (10 km/h), a warning light indicates if the door(s) or luggage compartment are open or not properly closed, along with the mes- sage “Boot open” or “WARNING: Door Open” and a beep will sound for around 40 seconds or until the door/ luggage compartment is closed.

Child safety
Move lever 4 and check from the inside that the doors are securely locked, to prevent the rear doors being opened from the inside.

Locking the doors manually

Turn screw 5 with the door open (using the end of the key) and close the door.
This means that the doors are then locked from the outside.
The doors may then only be opened from the inside or by using the key in the driver’s door.

Interior locking/unlocking door control

Switch 6 controls the doors, the boot and the fuel filler flap simultaneously. If a door or the tailgate is open or not closed properly, the doors and tailgate lock/unlock quickly. If transporting an object with the tail- gate open, you can still lock the doors: with the engine stopped, press and hold switch 6 to lock the other doors.

Operating faults
If you experience an operating fault (no central locking, the indicator light 1 does not light up when trying to lock the doors and luggage compartment etc.), make sure that central locking has not been deactivated by mistake and check that the doors and luggage compartment are properly closed. If they are properly closed, contact an approved dealer.

Adjusting the seat position
To move the seat forwards or back Move the 1 switch forwards or back-wards or, depending on the vehicle, lift and hold the 4 handle to unlock the seat. Release the handle once the seat is in the correct position and ensure that the seat is locked.

FAQ