2022-2023 Seat Leon Instrument Panel Instructions

The 2022–2023 Seat Leon’s instrument panel, which combines current functionality with a streamlined style to create an immersive and user-friendly driving experience, is a marvel of automotive technology. The instrument panel, one of the most important parts of the car’s interior, acts as the driver’s command center, providing a plethora of information and functions at their fingertips. We will go over the main characteristics and innovations that set the Seat Leon’s instrument panel apart in our introduction to this amazing little automobile. The instrument panel of the 2022–2023 Seat Leon is evidence of Seat’s dedication to innovation and superior design. As soon as you get in the driver’s seat, all the important driving information is neatly combined on a high-resolution, fully adjustable digital display. The digital cluster keeps you informed and connected without requiring you to take your eyes off the road by providing information on speed, fuel efficiency, navigation, and more right in front of you.

The straightforward and user-friendly interface of the instrument panel on the Seat Leon is one of its best characteristics. Drivers can easily access a wide range of amenities, from entertainment and communication to vehicle settings, thanks to the touch-sensitive controls and voice-activated capabilities. The driver can concentrate on the road while maintaining connectivity to the outside world thanks to this smooth integration of technology, which also improves safety and convenience. The Seat Leon’s instrument panel showcases the car’s luxurious interior design in addition to its technological capability. The interior design and materials combine style and comfort to provide a welcoming and delightful driving environment. The instrument panel of the 2022–2023 Seat Leon is made to enhance every moment spent behind the wheel, whether you’re traveling long distances on a highway or navigating through urban streets. In summary, the 2022–2023 Seat Leon’s instrument panel is a work of automotive engineering brilliance, skillfully fusing modern technology, elegant design, and practical usability. It is the epitome of form and function combined, resulting in a safe and joyful driving experience. Whether you’re a computer fanatic or just want a chic and contemporary car, The instrument panel of the Seat Leon is likely to wow and improve your driving experience.

Instrument panel

Introduction
The vehicle can be fitted with a instrument panel digital lap timer or one Digital (SEAT Cockpit).
After switching the engine on with a 12-volt battery that is heavily discharged or newly changed some system settings (such as the time, the date, the personalised comfort set-tings and the programming) might be altered or deleted. Check and correct these settings once the battery is sufficiently charged.

WARNING
Any distraction may lead to an accident, with the risk of injury.

1. Do not operate the instrument panel controls when driving.
2. To reduce the risk of accident and injury, only make adjustments to the instructions on the screen of the instrument panel and to the instructions on the screen of the Info-tainment system when the vehicle is sta-tionary.

Analogue instrument panel

1. Revolution counter (with the engine running, in hundreds of revolutions per minute).
2. Engine coolant temperature indicator.
3. Displays on the screen.
4. Speedometer.
5. Fuel gauge.

Digital dashboard (SEAT Digital Cockpit)

1. Control and warning lamps
2. Revolution counter. Revolutions per minute the engine is running.
3. Gear engaged or selector lever position
4. Screen display
5. Speedometer
6. Digital speed display
7. Information Profile.

The Digital SEAT Cockpit is an instrument panel digital with monochrome screen in colour high resolution. It has a 5 views accessible using the button of the multifunction steering wheel. By selecting different information profiles, indications other than the classic circular instruments can be displayed, such as navigation data, multimedia information or travel data.

The 5 views are:

1. Classic
2. Dynamic
3. Assistance systems
4. Navigation
5. Night

All views will display information on the screen about audio, phone, travel data, vehicle status, navigation1) and driving aids1).

Information profiles
Using the buttons on the multifunction steering wheel you can navigate through the different information of the SEAT Digital Cockpit. Information on the vehicle status, travel data and assistants will be displayed on the left side. On the right side information will be dis-played on audio, telephone, compass and navigation manoeuvres.

Depending on the view in the central area of the SEAT Digital Cockpit , information will be displayed on:

1. Classic View and Dynamic View: Initial data, date, distance travelled and autonomy. Turning the right thumbwheel on the multi-function steering wheel: navigation map, road signs, driving data (clicking on switches between the different memories).
2. Assists View: This is accessed by pressing the button or the button on the multi-function steering wheel. Turning the right thumbwheel on the multifunction steering wheel displays the list of assistants. Press to turn the desired assistant on/off.
3. Navigation View: By pressing the button on the multifunction steering wheel and then turning the thumbwheel you can view the map in a larger or smaller view. If you pressed the buttonagain, the map returns to automatic scale.
4. Night View: The speed is displayed in digital format.

Classic View
The revolutions per minute and speedometer needles appear in full length by a long press on the buttonon the multifunction steering wheel, regardless of the menu displayed in the central area.
With another long press on the button, the display will returns to the previous view. Or looking in the instrument panel menu for the Close option using the right hand thumbwheel on the multifunction steering wheel, and then press.

Information that may appear in the central area of the SEAT Digital Cockpit speed-ometer

1. Audio
2. Telephone
3. Compass
4. Navigation indications (the most recent destinations are displayed by pressing the arrow on the right of the multifunction steering wheel)
5. > (close classic view).

Information that may appear in the central area of the SEAT Digital Cockpit revolution counter

1. Consumption and average consumption. By pressing the arrow on the left of the multi-function steering wheel, you can switch be-tween the different memories of the travel data.
2. Autonomy (fuel tank level).
3. Lubricating oil and coolant temperature
4. Average speed. By pressing the arrow on the left of the multifunction steering wheel, you can switch between the different memo-ries of the travel data.
5. AdBlue autonomy.
6. Other travel data: km travelled and driving time. By pressing the arrow on the left of the multifunction steering wheel, you can switch between the different memories of the travel data.
7. Assist systems.
8. >(close classic view).

Digital dashboard (SEAT Digital Cockpit)

1. Control and warning lamps
2. Rev counter and Powermeter. Revolutions per minute the engine is running
3. Gear engaged or selector lever position
4. Screen display
5. Speedometer
6. Digital speed display
7. Information Profile

Status display

Possible indications on the instrument panel display
Different pieces of information can be dis-played on the screen of the instrument panel, depending on the features of the vehicle.

1. Doors, bonnet and rear lid open
2. Warning and information messages
3. Odometer
4. Time
5. Indications of the radio and navigation system
6. Indications of the phone
7. Outside temperature
8. Indications of the compass
9. Selector lever positions
10. Gear-change recommendation
11. Combined range (hybrid vehicles)
12. Display of travel data (multifunction dis-play) and menus for different settings
13. Service interval display
14. Speed warning
15. Speed warning for winter tyres
16. Start-Stop system status display
17. Signs detected by the road signs detection system and warning that the maximum per-mitted speed has been exceeded
18. Active cylinder management (ACT®) status indication
19. Low consumption driving
20. Identifying letters on engine (LDM)
21. Driver assistance system display
22. Copyright

Doors, bonnet and rear lid open
When the vehicle is unlocked and while driving, the instrument panel display shows if any of the doors, the bonnet or rear lid are opened and, in some cases, it is also indicated by an audible warning. The display may vary according to the type of instrument panel fitted.

Selector control positions (DSG® dual clutch gearbox)
The current position of the selector control is shown on the side of the control and on the instrument cluster display. When the control is in the D/S position or in the Tiptronic position, in some cases, the gear engaged in each case is shown on the instrument cluster display.

Outside temperature indicator
If the outside temperature is lower than approximately +4 °C (+39 °F), the “ice crystal symbol” on the outside temperature dis-play also lights up. This symbol remains lit until the outside temperature exceeds +6 °C (+43 °F) ››› .When the vehicle is stationary, when the auxiliary heater is switched on or when driving at very low speeds, the outside temperature indicated may be higher than the actual temperature due to the heat produced by the engine. The margin of measurement ranges from -45 °C (-49 °F) to +76 °C (+169 °F).

Gear-change recommendation
While driving, the instrument panel of certain vehicles may indicate a gear recommendation for saving fuel.

Odometer
The odometer registers the total distance travelled by the car.
The partial odometer (trip) shows the dis-tance travelled since the last time it was reset to zero.
Set the odometer to zero via the Infotain-ment system or the multifunction steering wheel.

To reset the trip odometer (trip ) to 0:

1. When in Travel data select trip.
2. Hold thebutton on the windscreen wiper lever or the button on the multifunction steering wheel down for about 2 sec-onds.

Combined operating range display(hybrid vehicles)
The value shown is calculated and updated according to the driving style. Therefore, the range can vary even when the fuel tank is full and the high-voltage battery is fully charged.
Range can be increased by reducing or switching off comfort consumers, e.g. air con-ditioning or seat heating.

Speed warning for winter tyres
If the maximum speed set is exceeded, this is displayed on the instrument panel.
The speed warning can be set in the infotain-ment system using the function button> Vehicle > Exterior > Tyres.

Indications of the compass
Depending on the equipment, when the ignition is on, the instrument panel display indicates the direction in which you are driving with a symbol, e.g. NW for Northwest.
When the Infotainment system is on and there is no route guidance active, the graphic representation of a compass is also shown.

Low consumption driving
Depending on the equipment, when the vehicle is movingis displayed on the instrument cluster display when the vehicle is in an economical consumption status due to active cylinder management (ACT®).

Identifying letters on engine (LDM)
Vehicles with analogue instrument panel:

1. Switch the ignition on, but do not start the engine.
2. See Service menu.

Copyright
Legal text about the property rights and copyrights of the instrument cluster.

WARNING
Even when the outside temperature is higher than freezing temperature, some roads and bridges could be frozen.

1. The “ice crystal symbol” indicates that there may be a risk of freezing.
2. At outside temperatures above +4 °C (+39 °F), there may be ice even when the “ice crystal symbol” is not on.
3. The outside temperature sensor takes a guideline measurement.

NOTE

1. There are different instrument panels and therefore the versions and instructions on the display may vary. In the case of dis-plays without warning or information texts, faults are indicated exclusively by the con-trol warning lamps.
2. Some indications on the instrument panel screen may be concealed by a sudden event, e.g. an incoming call.
3. Depending on the equipment, some set-tings and instructions can be carried out or displayed on the infotainment system as well.
4. If there are several warnings at the same time, the symbols will be displayed one af-ter the other for a few seconds. The sym-bols will stay on until you remove the cause.
5. If when switching on the ignition warnings are shown about existing faults, it might not be possible to change the settings or show the information as described. In this case, go to a specialised workshop and request a repair.

Instrument panel menus

The number of menus and information items available will depend on the vehicle’s elec-tronics and features.
Some menu options can only be read when the vehicle is stationary.

1. Driving data
2. Assist systems.
   1. Front Assist On/Off
   2. ACC (only display)
   3. Lane Assist On/Off
   4. Side Assist On/Off
3. Navigation.
4. Audio.
5. Telephone.
6. Vehicle status.

Service Menu

In the Service menu various settings can be adjusted depending on the features.

Open the Service menu
Vehicles with analogue instrument panel:

1. To open up the Service menu, select the Range information profile while in the Driving data menu, and keep the key pressed on the multifunction steering wheel for approximately 5 seconds. When it is released, the Service menu will be displayed. Now you can browse through the menu using the keys on the multifunction steering wheel as usual.

Vehicles with digital instrument panel (SEAT Digital Cockpit):

1. While in Classic View, go to the Initial Da-ta screen, press the button on the multifunction steering wheel for about 5 seconds and release it.
2. Next, the Configuration list menu is displayed, where you can choose between the Service menu or the View selection from where the instrument cluster views can be switched on and off.

Restart the service interval display
Select the Service menu and follow the instructions on the screen of the instrument panel.

Restart the oil service
Select the Restore Oil service menu and follow the instructions on the instrument panel display.

Reset driving data (vehicles with an analogue instrument cluster)
Select the Reset trip menu and follow the instructions on the instrument panel display to reset the value.

Identifying letters on engine (LDM)
Select the menu Engine code. The identifying letters of the engine will be shown on the instrument cluster display at the bottom left.

Setting the clock
Select the Time menu and set the correct time by turning the right thumbwheel of the multifunction steering wheel.

Next Service
This specifies when the next workshop inspection is scheduled.

Driving data indicator (multifunc-tion display)

3 Applies to vehicles with analogue instrument panel
The display of the travel data (multifunction display) shows different values about the journey and the consumption.

Change from one display to another

1. Turn the right thumbwheel of the multifunction steering wheel.

Changing memory
Vehicles with analogue instrument panel:

1. Press thebutton on the windscreen wiper lever or the button of the multifunction steering wheel.
2. Vehicles with digital instrument panel:
3. Depending on the view, select Trip data and press the left arrow or the button on the multifunction steering wheel.
   1. Since start: The memory is deleted if the journey is interrupted for more than 2 hours.
   2. Since refuelling: Display and stor-age of the journey data and the con- sumption values collected. When refuel-ling, the memory is deleted.
   3. Long-term: This memory contains trav-el data up to a maximum of 19 hours and 59 minutes or 99 hours and 59 minutes, or up to a maximum of 1999.9 km or 9999.9 km. When one of these values is exceeded (varies depending on the ver-sion of the instrument panel), the memo-ry is deleted.

Delete journey data presets

1. When in Travel data select desired memo-ry.
2. Hold the  button of the multifunction steering wheel or thebutton of the multi-function wheel pressed down for about 2 seconds.

Select the instructions
In the Infotainment system, in the menu Vehicle settings, you can display different travel data.

1. Current consumption: The current fuel consumption display operates throughout the journey, in litres/100 km; and with the engine running and the vehicle stopped, in litres/hour.
2. Average consumption: The average fuel consumption is displayed after driving for approximately 300 metres.
3. Travelling time: This indicates the hours (h) and minutes (min) since the ignition was switched on.
4. Range: Approximate distance in km that can still be travelled if the same driving style is maintained.
5. AdBlue range or: Approximate distance in km that can still be travelled with the current level of the AdBlue® tank with the same driving style. The in-dication appears from a range of less than 2,400 km and cannot be deactiva-ted.1)
6. Distance: Distance covered in km (m) after switching on the ignition.
7. Average speed: The average speed will be shown after driving for approximately 100 metres.
8. FAS: Reduced assistant indication.

Oil and coolant temperature indication (only with digital instrument panel)
The engine reaches its operating tempera-ture when, under normal driving conditions, the oil temperature is between 80°C (176°F) and 120°C (248°F). If a great effort is required from the engine and the outside temperature is high, the engine oil temperature may in-crease. This does not present any problem as long as the warning lamps  or  do not appear on the display.

Warning and information messages (Vehicle status)

The system runs a check on certain compo-nents and functions when the ignition is switched on and while the vehicle is moving. Faults are displayed on the instrument cluster display as red and yellow warning symbols2) accompanied by messages and, depending on the case, even an audible warning. The representation of the mes-sages and symbols may vary depending on the version of the instrument panel.
Existing faults can also be checked manually.

Priority 1 warning (red)
The symbol lights up or flashes (in part ac-companied by audible warnings).  Stop driving! Danger! Check the fault and elimi-nate the cause. If necessary, seek professio-nal assistance.

Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-companied by audible warnings). Operating faults or the lack of operating fluids can cause damage to the vehicle or a fault. Check the faulty function as soon as possible. If necessary, seek professional assistance.

Information message
It provides information about processes in the vehicle.

Accessing warnings and information

1. In the infotainment system, press  Ve-hicle data > Vehicle status.
2. Or:1) Access the Vehicle menu, then press the button on the multifunction steering wheel or the button on the wind-screen wiper lever and select Warning mes-sage memories.

Driver alert system (break recommendation)

The Fatigue detection informs the driver when their driving behaviour shows signs of fatigue.

Function and operation
Fatigue detection determines the driving be-haviour of the driver when starting a journey, making a calculation of tiredness. This is con-stantly compared with the current driving be-haviour. If the system detects that the driver is tired, an audible warning is given with a sound and an optic warning is shown with a symbol and complementary message on the instrument panel display. The mes-sage on the instrument panel display is shown for approximately 5 seconds, and depending on the case, is repeated. The system stores the last message displayed.
The message on the instrument panel display can be switched off by pressing the button on the windscreen wiper lever or the button on the multi function steering wheel.
The message can be recalled to the instru-ment panel display using the multifunction display.

Conditions of operation
Driving behaviour is only calculated on speeds above about 65 km/h (40 mph) up to around 200 km/h (125 mph).

Switching on and off
Fatigue detection can be activated or deacti-vated in the infotainment system using the function button> Assistants > Driver alerts > Fatigue detection. A mark indicates that the adjustment has been activated.

System limitations
The Fatigue detection has certain limitations inherent to the system. The following conditions can limit the Fatigue detection or pre-vent it from functioning.

1. At speeds below 65 km/h (40 mph)
2. At speeds above 200 km/h (125 mph)
3. When cornering
4. On roads in poor condition
5. In unfavourable weather conditions
6. When a sporty driving style is employed
7. In the event of a serious distraction to the driver

Fatigue detection will be restored when the vehicle is stopped for more than 15 minutes, when the ignition is switched off or when the driver has unbuckled their seat belt and opened the door.
In the event of slow driving during a long period of time (below 65 km/h, 40 mph) the system automatically re-establishes the tired-ness calculation. When driving at a faster speed the driving behaviour will be recalculated.

WARNING
Do not let the comfort afforded by the Fatigue detection system tempt you into taking any risks when driving. Take regular breaks, sufficient in length when making long journeys.

1. The driver always assumes the responsibility of driving to their full capacity.
2. Never drive if you are tired.
3. The system does not detect the tiredness of the driver in all circumstances. Consult the information in the section, System limitations.
4. In some situations, the system may incorrectly interpret an intended driving manoeuvre as driver tiredness.
5. No warning is given in the event of the effect called microsleep!
6. Please observe the indications on the instrument panel and act as is necessary.

NOTE

1. Fatigue detection has been developed for driving on motorways and well paved roads only.
2. If there is a fault in the system, have it checked by a specialised workshop.

Road signs detection system1)

The traffic signal detection system is activa-ted whenever the vehicle ignition is switched on.
The system records the standard traffic signs in front of the vehicle with a camera located on the base of the interior mirror and provides information about speed limits, hazard warn-ings and overtaking prohibitions. Within its limitations, the system also displays additional signals, such as time-specific pro-hibitions, signs for vehicles towing trailers ››› page 294 or limitations that only apply in the event of rain. Even on journeys without signs, the system may display any applicable speed limits. The traffic sign detection system does not work in all countries. Keep this in mind when travelling abroad.

Shown on the display
In Germany, on motorways and vehicle roads, besides speed limits and overtaking provisions the system also displays the end of prohibition signs. The valid speed limit at the time in other countries is always shown. The traffic signs detected by the system are displayed on the dash panel display and, depending on the navigation system fitted in the vehicle, on the infotain-ment system as well.
Hazard warning signs are not displayed in the infotainment system.

Road sign detection system messages:
There are no traffic signs available

1. The system is in its start-up phase.
2. OR: the camera has not recognized any mandatory or prohibitive sign.

Error: Dynamic Road Sign Display

1. There is a fault in the system. Have the sys-tem checked by a specialised workshop.

Speed warning currently unavailable

1. The speed warning function of the road sign detection system is faulty. Have the sys-tem checked by a specialised workshop.

Dynamic Road Sign Display: please clean the windscreen

1. The windscreen is dirty in the camera area. Clean the windscreen.

Dynamic Road Sign Display currently restricted

1. The navigation system is not transmitting data. Check if the navigation system has up-dated maps.
2. OR: the vehicle is in a region not included on the navigation system’s map.

No data available

1. The traffic sign detection system does not work in the current country.

Display of traffic signs
When the traffic sign detection system is con-nected, a camera located on the base of the interior rear-view mirror records the traffic signs in front of the vehicle. After checking and evaluating the information from the cam-era, the navigation system and the current vehicle data, up to two valid road signs are displayed, with their corresponding addition-al signs:

1. First position. The sign that is currently val-id for the driver is shown in the screen. For ex-ample, a maximum speed limit of 130 km/h (100 mph).
2. Second position. A second traffic sign may be displayed in the second position, such as a hazard warning sign, an overtaking prohibi-tion or an alternative speed limit.

Additional sign: If the windscreen wiper is working while you are driving, the signal with the additional rain sign will be shown first, on the left, as it is the one that is applicable at the time.
A sign valid only with restrictions, e.g. no over-taking at certain times, may be displayed.

Speed warning (depending on the instru-ment panel)
If the system detects that the permitted speed is exceeded, it may warn the driver with a “gong” and visually with a message on the dash panel display.

Trailer mode
In vehicles equipped with a towing bracket device from the factory and a trailer that is electrically connected to the vehicle, it is possible to activate or deactivate the display of specific traffic signs for vehicles with trailer, such as speed limits or overtaking prohibitions. It can be activated or deactivated in the infotainment system using the button > Assistants > Driver alerts > Road signs detect. > Consider trailer.
For trailer mode, the display of speed limits applicable to the type of trailer or to the legal » provisions can be adjusted. The speed is adjusted in steps of 10 km/h (5 mph) within a range of between 60 km/h (40 mph) and 130 km/h (80 mph). If it is adjusted to a speed greater than that which is permitted in the country in question for driving with a trailer, the system automatically displays the usual speed limits, e.g. in Germany 80 km/h (50 mph). If the speed warning for the trailer is deactivated, the system displays the speed limits as if there were no trailer hitched.

No entry sign
The traffic sign recognition system warns acoustically and visually in the instrument panel when a no entry sign is crossed on a one-way road or an entrance to a motorway or highway.

Limited operation
The traffic sign detection system has certain limitations. The following cases may lead the system to operate with limitations or not at all:

1. In the case of poor visibility, e.g. in snow, rain, fog or intense mist.
2. In cases of dazzling, e.g. caused by head-on traffic or by the sun.
3. When driving at high speeds.
4. If the camera is covered or dirty.
5. If the traffic signs are out of the camera’s field of vision.
6. If the traffic signs are partially or totally covered, e.g. by trees, snow, dirt or other vehi-cles.
7. In the case of traffic signs that do not fulfil the regulations.
8. In the case of damaged or bent traffic signs.
9. In the case of variable messages on over-head or gantry signs (LED-based variable traffic signs or other lighting units).
10. If the maps on the navigation system are not up-to-date.
11. In the case of adhesives affixed to vehicles that depict traffic signs, e.g. speed limits on lorries.

WARNING
The technology in the traffic sign detection system cannot change the limits imposed by the laws of physics and only works with-in the system’s limits. Do not let the extra convenience afforded by the traffic sign detection system tempt you into taking any risks when driving. The system is not a re-placement for driver awareness.

1. Adapt your speed and driving style to suit visibility, weather, road and traffic conditions.
2. Poor visibility, darkness, snow, rain and fog may lead to the system failing to display traffic signs or not displaying them correctly.
3. If the camera’s field of vision is dirty, covered or damaged, system operation may be impaired.

WARNING
The driving recommendations and traffic indications shown on the traffic sign detec-tion system may differ from the actual cur-rent traffic situation.

1. The system may not detect or correctly show all the traffic signs.
2. Traffic signs and traffic regulations have priority over the recommendations and dis-plays provided by the system.

WARNING
If messages are ignored, the vehicle may stall in traffic and cause accidents and se-vere injuries.

1. Never ignore the messages displayed.
2. Stop the vehicle at the next opportunity and in a safe place.

NOTE
To avoid affecting the correct operation of the system, take the following points into consideration:

1. Regularly clean the area of vision of the camera and keep it in a clean state, without snow or ice.
2. Do not cover the field of vision of the camera.
3. Always replace damaged or worn blades when required to avoid lines on the cam-era’s field of vision.
4. Check that the windscreen is not dam-aged in the area of the camera’s field of vi-sion.
5. The use of outdated maps on the naviga-tion system may cause the system to show traffic signs incorrectly.
6. In the waypoints mode of the navigation system, the traffic sign detection system is only partly available.
7. Failure to heed the control lamps and corresponding text messages when they light up may result in damage to the vehicle.

Eco-efficient driving assistance

Eco-efficient driving assistance helps you drive with care and with low energy con-sumption by following instructions superim-posed in the digital cockpit, depending on the situation.
When you approach places such as a junc-tion, a roundabout or a section of road with a speed limit, the symbol is displayed along with an event in the digital cockpit. As soon as you follow the indication and take your foot off the accelerator, the vehicle adapts, based on the selected driving profile and distance to the incident, brake energy re-cuperation and speed. Eco-efficient driving assistance uses the trip data from the infotainment system and the sensors of some assist systems. If no destination guidance is active, the most likely route is used. Pressing the accelerator can cancel the in-tervention of the assistance at any time.
Eco-efficient driving assistance can be switched on and off in the infotainment sys-tem, in the assist system settings.

Eco-efficient driving assistance is temporarily switched off if:

1. The gear selector is in the S position.
2. The sport driving program is used.
3. Driving with adaptive cruise control (ACC) or cruise control (GRA).

When these conditions no longer exist, the assistance is reactivated if it is switched on in the assist system settings.
Eco-efficient driving assistance is available depending on the equipment, although not in all countries.

WARNING
The system is not a replacement for driver awareness.

1. Adapt your speed and driving style at all times to suit visibility, weather, road and traffic conditions.
2. Traffic signs on the road and traffic regulations have priority over eco-driving notes.

NOTE

1. The appearance of the symbols may vary slightly depending on the equipment and model. System updates may modify or expand the symbols.
2. When the system is switched on, eco-efficient driving assistance can also increase recuperation without any indication being displayed. This can occur in situations such as when the accelerator pedal is released when a vehicle is driving in front. In this case, energy recuperation is adapted match the speed of the vehicle in front without any indication being displayed.

Time

Setting the time on the infotainment system

1. Press> Settings.
2. Select the menu option Time and date to set the time.

Setting the time on analogue the instru-ment panel

1. When in the Driving data menu, select the Range function (> Interior > Instrument cluster).
2. Press the buttonon the multifunction steering wheel until the Service menu is displayed on the instrument panel display.
3. Select the menu Time.
4. Adjust the correct time by turning the right thumbwheel of the multifunction steering wheel.

Revolution counter

The rev counter indicates the number of engine revolutions per minute.
Together with the gear-change indicator, the rev counter offers you the possibility of using the engine of your vehicle at a suitable speed.
The beginning of the red zone of the rev counter indicates the maximum speed in any gear after running-in and with the engine hot. However, it is advisable to change up a gear or move the selector lever to D (or lift your foot off the accelerator) before the needle reaches the red zone. We recommend that you avoid high revs and that you follow the recommendations on the gear-change indicator. Consult the addition-al information in, Selecting the optimal gear.

CAUTION

1. To prevent damage to the engine, the rev counter needle should only remain in the red zone for a short period of time.
2. When the engine is cold, avoid high revs and heavy acceleration and do not make the engine work hard.

For the sake of the environment
Changing up a gear early will help you to save fuel and minimise emissions and engine noise.

FAQs

Useful Link

View Full PDF: 2022-2023 Seat Leon
2022-2023 Seat Leon Fuses and Fuse Box Guidelines