2022 Skoda Karoq Lights and Wipers User Guide
Welcome to the future of automotive innovation with the 2022 Skoda Karoq Lights and Wipers! In an era where technology meets elegance, Skoda has once again elevated the bar by integrating cutting-edge advancements in lighting and wiper systems to enhance your driving experience. As we delve into the remarkable features of the 2022 Skoda Karoq’s illumination and wipers, you’ll discover a world of sophistication, safety, and convenience that sets this SUV apart in its class.
From adaptive lighting solutions that illuminate your path with precision to intelligent wiper systems that respond to changing weather conditions, the 2022 Skoda Karoq is designed to elevate your driving voyage to new heights. Join us on this voyage as we explore how these modern marvels redefine what it means to drive in style and safety.
Lights
Introduction
Unless otherwise stated, the lights only work when the ignition is switched on.
For the basic position of the light switch, use position.
Note
The headlights may mist up temporarily. When the light is switched on, the light-emitting surface demists after a short period of time.
Operating the lights
To switch on/off the lights, turn the A Fig. 61 switch to one of the following positions (equipment-dependent).
O Switching off lights (except daytime running lights)
AUTO Switching the light on/off automatically
Switching on the parking lights or parking lights on both sides
Switching on the low beam
Headlight range control of the Halogen headlights
The headlight range can be set in Infotainment in the menu light
The range of the halogen headlights can be set on the screen, in accordance with the vehicle load, to the following basic settings.
Front seats occupied, boot empty
All seats occupied, boot empty
All seats occupied, boot loaded
Driver seat occupied, boot loaded
In the event of another vehicle loading condition, the setting for positions can be used.
The Full LED Front headlights Automatically adjust to vehicle loading and driving conditions, so they do not have manual headlight range control.
WARNING
Always adjust the headlight range control to comply with the following conditions and prevent accidents.
The vehicle does not dazzle other road users, especially oncoming vehicles.
The beam range is sufficient for safe driving.
Note
If, with a dipped beam, the ignition is turned off, then the dipped beam will automatically switch off and the parking lights will come on. Does not apply to the position AUTO as long as the conditions are met for the COMING HOME function . The parking lights are switched off when the ignition key is removed (for vehicles with the KESSY system, after opening the driver’s door).
If there is a fault in the light switch, the low beam comes on automatically.
Daytime running lights
The daytime running lights illuminate the area in front of and to the rear of the vehicle (only applicable for some countries).
The lights are switched on automatically if the following conditions are met.
The ignition is switched on.
The light switch is in the position O or .
Or: the light switch is in the position AUTO and visibility has not become worse.
WARNING
Always switch on the low beam when visibility is poor.
Turn Signal and Main Beam
Switch on the right turn signal
Switch on the left turn signal
Switch on main beam (spring-tensioned position)
Switch off main beam / headlight flasher on (spring-tensioned position)
The main beam can only be switched on when the low beam lights are on.
The headlight flasher can be used even if the ignition is switched off.
The turn signal switches off automatically depending on the steering angle after turning.
Use the control stalk to switch on/off the headlight assistant.
Comfort Indicating
When the control talk is pressed slightly up or down, the respective turn signal indicates three times.
If during the convenience turn signal, the operating lever is pressed in the opposite direction, the indicating will stop.
Convenience signalling can be activated/deactivated in Infotainment in the menu Light
WARNING
Only turn on the main beam or the headlight flasher if other road users will not be dazzled.
Note
The setting (activation/deactivation) of the convenience turn signal is stored (depending on the Infotainment type) in the active user account personalisation.
Automatic Driving Light Control
If the light switch is in position » Fig. 63, then the lights are automatically switched on/off to suit current light or weather conditions (rain), depending on the equipment.
If the light switch is in position, the lettering AUTO illuminates next to the light switch. If the light is switched on automatically, the symbol also illuminates next to the light switch.
Automatic driving light control in the rain (referred to as function in the following)
The dipped beam is switched on automatically if the following conditions are met.
The function is activated.
The light switch is in the position AUTO
The windscreen wipers are on for more than 30 s.
The light turns off automatically about 4 minutes after turning off the wipers.
Setting, Activation/Deactivation
The following functions can be set or activated/deactivated in Infotainment in the menu Light.
Sensitivity adjustment of the sensor for determining the lighting conditions for automatic driving light control
Automatic driving light control during rain
WARNING
The automatic driving lamp control (position AUTO ) only operates as a sup-port and does not release the driver from his responsibility to check the lights and, if necessary, to switch on the light depending on the prevailing light conditions.
CAUTION
Poorer visibility is detected by a sensor mounted below the windscreen in the holder of the inside mirror or in the control panel. Do not cover the sensor -the system can be affected.
Note
The setting (activate/deactivate) of the automatic driving light control during rain is stored (depending on the Infotainment type) in the active user account personalisation.
Full LED headlights
The Full LED headlights (hereinafter referred to as just system) use the journey data to automatically ensure the best possible light cone in front of the vehicle.
The system operates automatically in the following modes: urban, remote, motorway and bad weather.
A component of the system is the static side light. This light is used in some light modes, e.g. for bend illumination during reversing.
The system works as long as the light switch is in position AUTO.
WARNING
If there is a system malfunction the headlights are automatically lowered to the emergency position, which prevents a possible dazzling of oncoming traffic. This reduces the cone of light in front of the vehicle. Seek help from a specialist garage.
Light Assist
The system automatically switches the high beam on/off in accordance with the existing traffic (other vehicles) and environmental conditions (e.g. driving through a lit village).
The high beam on/off is controlled by a sensor or a camera » Fig. 64. The system can be activated/deactivated in Infotainment in the menu Light → Light Assist.
Conditions for the system function
The system is activated.
The light switch is in the position AUTO.
The vehicle speed is over 60 km/h or for some countries more than 40 km/h.
The windscreen is clean in the sensor area.
Switch on the system
Push the lever into the sprung position A The following indicator light lights up in the instrument cluster display. Switch off the system
Switch off the system
- If the high beam is switched on automatically, move the lever into the sprung position B . The warning light
goes out. The high beam turns off.
- If the high beam is is not switched on automatically, move the lever into the sprung position A . The warning light
goes out. The high beam turns on.
The high beam switches off automatically when the speed falls below 30 km/h (but the system remains switched on).
If there is a fault, the error message will appear in the instrument cluster dis-play. Seek help from a specialist garage.
WARNING
The system is used only for support, thus the driver is not released from his obligation to manually adjust the main or low beam according to the given ambient conditions (e.g. in unfavourable lighting and weather conditions, as when passing poorly lit road users, if necessary, when the area in front of the sensor is covered by an obstacle).
CAUTION
Do not cover the sensor and keep the front screen clean – system functionality can be impaired.
Note
The setting for the high-beam assistant in Infotainment is stored (depending on the Infotainment type) in the active user account for personalization
Fog lights/rear fog light
Switching on the fog lights/rear fog lights is possible under the following conditions.
The lights switch is in position AUTO , .
To switch on the fog lights, turn the light switch to position light illuminates in the instrument cluster.
warning light illuminates in the instrument cluster.
If the vehicle is not equipped with fog lights, the rear fog lights can be switched on by pulling the light switch to the only possible setting.
Switch off the fog lights/rear fog lights in reverse order.
Not
If an accessory is connected to the trailer socket, the rear fog lamp does not light up on the vehicle.
Fog lights with CORNER Function
The CORNER function automatically switches on the fog lights on the respective side of the vehicle (e.g. when cornering or steering), if the following conditions are fulfilled.
The turn signal is turned on or the front wheels are severely locked (in the event of conflict between the two versions, has turn signal has the higher priority).
The vehicle speed is below 40 km/h.
The low beam is switched on.
The fog lights are not switched on.
The two fog lights are switched on when you shift into the reverse gear.
COMING HOME / LEAVING HOME
The function COMING HOME ensures that the vehicle’s environment is illuminated after switching off the ignition and opening the driver’s door.
The function LEAVING HOME ensures that the vehicle’s environment is illuminated after unlocking the vehicle with the radio remote control unit.
The function switches the light on only if there is poorer visibility and the light switch is in the position AUTO.
The two functions can be used in Infotainment in the menu (activated/deactivated and adjusted).
CAUTION
Poorer visibility is evaluated by a sensor mounted below the windscreen in the holder of the rear-view mirror. Do not cover the sensor – the system can be affected.
If this option is always enabled, then the battery is heavily loaded.
Note
The setting of the two functions is stored (depending on the Infotainment type) in the active user account personalisation.
Hazard Warning Light System
To switch on/off, press the button.
When switching on, all the turn signal lights as well as the warning light in the button flash simultaneously with the control lights in the instrument cluster.
The hazard warning light system can also be operated if the ignition is switched off.
If one of the airbags is deployed, the hazard warning light system will switch on automatically.
The automatic activation of hazard warning lights can take place during a heavy braking. After starting or accelerating the hazard warning system is automatically switched off.
When the hazard warning system is on and the turn signal is switched on, the hazard warning lights are switched off temporarily and only the turn signal flashes on the relevant side of the vehicle.
Parking Light
The side light is provided for lighting of the parked vehicle.
Switching on the side light on one side
Switch off the ignition.
Press the control lever all the way into position or until it stops.
The parking lights on the respective side of the vehicle are turned on.
Switching on the side light on both sides
Turn the ignition on and turn the light switch to position.
Switch off the ignition and lock the car.
After removing the ignition key and opening the driver’s door, an audible warning sounds. After a few seconds, or after closing the driver’s door, the acoustic warning signal stops.
CAUTION
Turning on the parking light means the battery is heavily loaded.
The parking lights may switch off automatically due to a low battery charge. If the two-sided parking lights are switched on when the ignition is off, the parking lights will not switch on automatically.
Entry space lighting
The lighting is positioned on the lower edge of the exterior mirror and illuminates the entry area of the front door.
The lighting switches on after unlocking or opening the vehicle door (depending on the lighting conditions).
The lighting switches off after around 30 seconds after closing the front door or switching on the ignition.
Driving abroad
When driving in countries with opposing traffic system (traffic on the left/right), your headlights may dazzle oncoming traffic.
Therefore, the Full LED Front headlight setting must be adapted by turning on travel mode in infotainment in the Light menu. In this mode, no automatic beam adjustment is made ahead of the vehicle.
Interior Lighting
Introduction
The inner lighting also works if the ignition is switched off. With the ignition off (or after a door is opened),the lights will automatically switch off after approximately 10 minutes.
Operation of the lights from the front seats
Switching on/off (by pressing the relevant switch) – version 1 Fig. 67 A
- Automatic operation
- Rear lighting
- Reading lamp left
- Reading lamp right
Positions of the rocker switch A – versions 2 and 3 Fig. 68
Switching on
Automatic operation (centre position) Switching off
There is no icon available for the centre position (automatic operation) in version 3.
O Switching on/off (by pressing the relevant switch B version 2 and 3)
- Reading lamp left
- Reading lamp right
Automatic operation – switch or position
The system is turned on when any of the following is present.
- The vehicle is unlocked.
- One of the doors is opened.
- The ignition key is removed.
The system is turned off when any of the following is present.
- The vehicle is locked.
- The ignition is switched on.
About 30 seconds after all the doors have been closed. Interior light, rear.
FAQs
Yes, LED headlights are standard on the majority of 2022 Skoda Karoq trims.
Adaptive headlights modify their intensity and direction in response to the vehicle’s speed and steering angle. Depending on the specification level, this feature may be available as an option on the 2022 Skoda Karoq.
Yes, daytime running lights are standard on most 2022 Skoda Karoq models.
Yes, numerous 2022 Skoda Karoq models are equipped with rain-sensing windshield wipers that alter their speed based on the intensity of the precipitation.
Rain-sensing windshield wipers use sensors to detect droplets on the windshield and adjust the wiper speed automatically to maintain optimal visibility.
Auto-dimming rearview mirrors may be available on certain 2022 Skoda Karoq trim levels or as an option.
Rearview mirrors with automatic dimming reduce glare from behind-you headlamps, enhancing nighttime driving comfort and safety.
Certain 2022 Skoda Karoq trim levels typically offer front and rear fog lamps as optional equipment.
Fog lamps are intended to enhance visibility in dense fog, heavy rain, and snow. Utilize them when visibility is severely compromised.
Yes, the 2022 Skoda Karoq could include a high beam assist system that automatically switches between high and low beams based on impending traffic.
The high beam assist is typically activated by selecting the high beam headlamps; the system then adjusts itself as necessary.
Yes, the Skoda Karoq may have various wiper modes, such as intermittent, continuous, and automatic rain-sensing modes.
Yes, you can typically operate the windshield wipers manually using the stalk on the steering column.
Certain 2022 Skoda Karoq models may offer heated windshield wipers as an option, which can help prevent ice and snow buildup in frigid climates.
Yes, the Skoda Karoq typically includes a windshield washer fluid level indicator to help you monitor and replenish the windshield washer fluid as required.
Useful Link
View Full PDF: Skoda Karoq 2022 User Manual Auto User Guide