Skoda Enyaq 2021-2023 Keys Operation Instructions
The Skoda Enyaq is a prime example of innovation and functionality, showcasing state-of-the-art technology in its key operating system. The Enyaq’s key operation from 2021 to 2023 combines convenience and modernity, providing a seamless and intuitive experience. Let’s examine the main operations of this exceptional vehicle, which combines user-friendly features with advanced functionalities. We will explore its capabilities and intricacies that contribute to effortless interaction and control.
Keys, locks and alarm system
Key
Key Overview
- Locking the vehicle
- Operating the boot lid
- Unlocking the vehicle
- Battery status warning light
- Locking tab for removal of the key bit
NOTICE
- Protect the key from moisture and strong vibrations.
- Keep the grooves in the key clean.
The effective range of the key signal is about 30 m. The effective range can be reduced, e.g. due to signal interference from other transmitters.
Removing the key bit
- Press securing tab A . The pendant part B of the key bit folds out.
- Press the securing tab A again.
- Remove the key bit.
Troubleshooting
The battery in the key is almost empty
- After pressing a button on the key, the warning light does not flash.
Or:
- A message stating it is necessary to change the battery will be displayed.
- Replace the battery
The vehicle cannot be unlocked or locked with the remote control
There may be the following reasons:
- The battery in the key is empty.
- Replace the battery
- The key is not synchronized. Synchronize the key as follows:
- Press any button on the key.
- Unlock the door within 1 minute with the key via the locking cylinder
If necessary, the key must be synchronized if a favoured button on the key has been repeatedly pressed outside of the effective range of the remote control.
Changing the key battery
The new battery must comply with the specification of the original battery.
- Remove the key bit and partially insert it into the opening.
- Press down on the key fob to re-lease the top cover.
- Open the battery cover.
-
Insert a thin screwdriver into the recess A and remove the battery.
-
Press any button on the remote key to reset the key.
-
Insert the new battery.
-
Fit the battery cover and press until it clicks into place.
WARNING
Risk of death!
If the battery is swallowed, serious or even fatal injuries can result from burns in the digestive tract.
-
Always keep children away from the vehicle key and batteries.
-
If the battery is swallowed, seek medical help immediately.
Central locking
Functionality
Central locking system
The system simultaneously unlocks and locks all doors, the charging socket cover and the boot lid.
Unlock indicator: double flashing of the indicator lights.
Lock indicator: single flashing of the indicator lights.
The warning light in the driver’s door will flash for about 2 sec-onds in quick succession after the vehicle is locked, then it will start flashing regularly at longer intervals.
If no door is opened within 45 seconds after unlocking, the vehicle automatically locks again.
If the handle of the boot lid is not pressed within 120 s, the lid automatically locks again.
SAFE function
Depending on the equipment, the central locking system can in-clude the SAFE function.
The SAFE function prevents the doors from opening from the inside once the vehicle is locked.
The SAFE function is activated when the vehicle is locked from the outside.
In the display of the instrument cluster after the ignition is switched off, a message regarding the SAFE function is dis-played.
DANGER
Risk of death!
- No people are allowed in the locked vehicle with the SAFE function.
Turn off the SAFE function
- By double locking within 2 seconds.
Or:
- Together with the deactivation of the interior monitoring Settings.
The warning light in the driver’s door will flash for about 2 sec-onds in quick succession after the vehicle is locked, then goes out and starts flashing regularly at longer intervals after about 30 secs.
When the SAFE function is switched off, the door can be opened from the inside by pulling once on the opening lever.
The SAFE function is switched on again after unlocking and locking the vehicle.
Operation
Ways in which central locking operates
Depending upon vehicle equipment:
- Key
- Keyless locking (KESSY)
- Central locking button
Lock/unlock using the central locking button
- The button in the middle part of the control panel.
- The symbol in the button comes on when locked.
The button locks/unlocks all of the doors and the boot lid.
The vehicle is also unlocked when a door is opened from the in-side.
WARNING
A locked vehicle with a central locking button makes it difficult for responders to enter the vehicle in an emergency.
Setting the unlocking and locking function
- In the Infotainment system, select the menu
side . - By moving your finger sideways, choose the screen with the menu item Central locking .
- Select Central locking .
All doors
Unlocking of all doors, the boot lid and the battery charging flap.
Single door
Using the button on the key, the driver’s door and the battery charging flap are unlocked.
In vehicles equipped with a keyless locking system, the door near to which the key is located and the battery charging flap are unlocked by touching the door handle.
When unlocked again, the other doors and the boot lid are un-locked.
Doors on one side of the vehicle
Using the button on the key, the doors on the driver’s side and the battery charging flap are unlocked.
In vehicles equipped with a keyless locking system, the doors on the passenger’s side near to which the key is located and the fuel filler flap are unlocked by touching the door handle.
When unlocked again, the other doors and the boot lid are un-locked.
Troubleshooting
Central locking fault
- The warning light in the driver’s door first flashes for 2 secs in quick succession.
- Then it lights up continuously.
- After 30 secs, it flashes slowly.
- Seek the help of a specialist garage.
Mechanically unlocking and locking the door
Unlocking and locking the door with the lock cylinder
Remove the cover
- Pull the handle on the front left door and hold it in place.
- Insert the key bit into the recess on the underside of the cover.
- Lift the cover in the direction of the arrow.
- Release the door handle.
Locking and unlocking
- Insert the removed key bit with the pendant facing downwards in-to the lock cylinder, then unlock or lock it.
Install cover
- Pull on the door handle and hold it.
- Replace the cover.
- Release the door handle.
Locking the door without the lock cylinder
- Open the door.
- For vehicles with a panel over the opening, remove the panel.
- Insert the key or a flat-head screwdriver into the slot.
- Turn the key or flat-head screwdriver towards the outside of the vehicle (spring-loaded position).
After closing, the door is locked.
Keyless locking (KESSY)
UThe keyless locking system, KESSY, enables unlocking and locking of the vehicle without actively using the remote control key.
Operation
Keep the key with you when unlocking and locking.
The sensors on the handle are intended to be operated with bare hands, e.g. wearing gloves may affect the function of the sen-sors.
The recess on the door handle is also present on vehicles without the keyless locking system.
Release
- Grab the door handle.
- Open the door.
- Touch the sensor.
After locking, it is not possible to unlock within 2 seconds by touching the door handle. This can be used to check whether the vehicle is locked.
FAQs
To secure the vehicle, simply press the lock button on the key fob once. To gain access, simply press the unlock button. In addition, double-pressing the unlock button activates the simultaneous opening of all windows and the sunroof.
Affirmative, if the vehicle is equipped with this feature, simply press and hold the remote start button for a few seconds to initiate remote engine start. The car will remain securely locked.
There is a tangible key located within the fob. Utilize it to manually disengage the driver’s door and gain entry to the vehicle. Replace the battery promptly.
Press and maintain pressure on the lock button for a few seconds. This triggers the panic alarm.
Certain models may offer the capability to remotely adjust specific settings, such as activating the lights or adjusting the climate control.
Affirmative, it is indeed possible to program multiple fobs to function with the Enyaq. Seek help from your authorized dealership for assistance.
They have the capability to disable the misplaced key fob and configure a replacement for your vehicle.
Yes, the Enyaq is equipped with a keyless entry system.Yes, the Enyaq may have keyless entry, which enables you to unlock and start the car without physically removing the key fob from your pocket or bag, if it is equipped with this feature.
The majority of key fobs have a straightforward procedure for replacing the battery. Consult the owner’s manual for precise instructions.
Key fobs are generally programmed specifically for a particular vehicle and cannot be readily reprogrammed for another
Certain models may be equipped with a function that activates the lights or horn to aid in locating the vehicle in a congested parking area.
Indeed, the dealership possesses the capability to deactivate misplaced or pilfered key fobs in order to thwart any unauthorized entry into the vehicle.
Inspect the battery as a preliminary step. If the problem continues, please reach out to your dealership for further assistance.
Yes, the key fob can be utilized to access various driving modes or settings in the Enyaq. The key fob may grant remote access to specific driving modes or settings, depending on the model and features. Consult the manual for specific information.
It is advisable to consult the owner’s manual or contact the dealership for precise instructions, as the Enyaq model and year may have variations in specific details.
Useful Links
View Full PDF : Skoda Enyaq 2021-2023 User Manual| Auto User Guide
Skoda Enyaq 2021-2023 Interior and Exterior Features Guide